Table of Contents Author Guidelines Submit a Manuscript
International Journal of Electrochemistry
Volume 2013 (2013), Article ID 853869, 8 pages
http://dx.doi.org/10.1155/2013/853869
Research Article

Influence of Bath Composition at Acidic pH on Electrodeposition of Nickel-Layered Silicate Nanocomposites for Corrosion Protection

1Department of Chemistry, University of North Texas, 1155 Union Circle No. 305070, Denton, TX 76203, USA
2Department of Mechanical and Energy Engineering, University of North Texas, Denton, TX 76207, USA
3Center for Advanced Materials, Qatar University, P.O. Box 2713, Doha, Qatar

Received 29 July 2013; Revised 24 September 2013; Accepted 25 September 2013

Academic Editor: Hamilton Varela

Copyright © 2013 Jeerapan Tientong et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Z. Friend, Corrosion of Nickel and Nickel-Base Alloys, Willey-Interscience, New York, NY, USA, 1980.
  2. Y.-Y. Chang and D.-Y. Wang, “Corrosion behavior of electroless nickel-coated AISI 304 stainless steel enhanced by titanium ion implantation,” Surface and Coatings Technology, vol. 200, no. 7, pp. 2187–2191, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. L. Wang, J. Zhang, Y. Gao, Q. Xue, L. Hu, and T. Xu, “Grain size effect in corrosion behavior of electrodeposited nanocrystalline Ni coatings in alkaline solution,” Scripta Materialia, vol. 55, no. 7, pp. 657–660, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Xuetao, W. Yu, S. Dongbai, and Y. Hongying, “Influence of pulse parameters on the microstructure and microhardness of nickel electrodeposits,” Surface and Coatings Technology, vol. 202, no. 9, pp. 1895–1903, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Brondel, R. Edwards, A. Hayman, D. Hill, S. Mehta, and T. Semerad, “Corrosion in the oil industry,” Oilfield Review, vol. 6, no. 2, pp. 4–18, 1994. View at Google Scholar · View at Scopus
  6. R. A. Horch, T. D. Golden, N. A. D'Souza, and L. Riester, “Electrodeposition of nickel/montmorillonite layered silicate nanocomposite thin films,” Chemistry of Materials, vol. 14, no. 8, pp. 3531–3538, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. H. A. Conrad, J. R. Corbett, and T. D. Golden, “Electrochemical deposition of γ-phase zinc-nickel alloys from alkaline solution,” Journal of the Electrochemical Society, vol. 159, no. 1, pp. C29–C32, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. V. DeLeon and T. D. Golden, “Effect of electrochemical parameters on the morphology and Ca/P ratios of deposited apatite coatings on metal and alloy substrates,” ECS Transitions, vol. 33, no. 21, pp. 43–50, 2011. View at Google Scholar
  9. P. H. C. Camargo, K. G. Satyanarayana, and F. Wypych, “Nanocomposites: synthesis, structure, properties and new application opportunities,” Materials Research, vol. 12, no. 1, pp. 1–39, 2009. View at Google Scholar · View at Scopus
  10. W. Chen, Y. He, and W. Gao, “Synthesis of nanostructured Ni-TiO2 composite coatings by sol-enhanced electroplating,” Journal of the Electrochemical Society, vol. 157, no. 8, pp. E122–E128, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. L. Benea, “Electrodeposition and tribocorrosion behaviour of ZrO2-Ni composite coatings,” Journal of Applied Electrochemistry, vol. 39, no. 10, pp. 1671–1681, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. I. Corni, R. J. Chater, A. R. Boccaccini, and M. P. Ryan, “Electro co-deposition of Ni-Al2O3 composite coatings,” Journal of Materials Science, vol. 47, p. 561, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. H. B. Temam, I. Zeroual, A. Chala, S. Rahmane, and C. Nouveau, “Microhardness and corrosion behavior of Ni-SiC electrodeposited coatings,” Plasma Processes and Polymers, vol. 4, no. 1, pp. S618–S621, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Sen, S. Das, and K. Das, “Influence of duty cycle on the microstructure and microhardness of pulse electrodeposited Ni-CeO2 nanocomposite coating,” Materials Research Bulletin, vol. 47, no. 2, pp. 478–485, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Sahu and N. A. D'Souza, “Interfacial effects in montmorillonite filled polyester thin films,” Open Macromolecules Journal, vol. 6, pp. 28–32, 2012. View at Google Scholar
  16. E. Ogunsona, S. Ogbomo, M. Nar, and N. A. D'Souza, “Thermal and mechanical effects in polystyrene-montmorillonite nanocomposite foams,” Cellular Polymers, vol. 30, no. 2, pp. 79–94, 2011. View at Google Scholar · View at Scopus
  17. M. C. Richardson, J. Kim, D. Ho, C. R. Snyder, N. A. D'Souza, and G. A. Holmes, “Organofunctionalized montmorillonite/epoxy nanocomposites: the effect of interlayer cation distribution on mechanical properties,” Polymer Composites, vol. 32, no. 1, pp. 67–78, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Q. Wang, N. A. D'Souza, and T. D. Golden, “Ceramic montmorillonite nanocomposites by electrochemical synthesis,” Applied Clay Science, vol. 42, no. 1-2, pp. 310–317, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Q. Wang, N. A. D'Souza, and T. D. Golden, “Electrosynthesis of nanocrystalline cerium oxide/layered silicate powders,” Journal of Materials Chemistry, vol. 16, no. 5, pp. 481–488, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Zaarei, A. A. Sarabi, F. Sharif, and S. M. Kassiriha, “Structure, properties and corrosion resistivity of polymeric nanocomposite coatings based on layered silicates,” Journal of Coatings Technology Research, vol. 5, no. 2, pp. 241–249, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Olad, M. Amini, and A. Rashidzadeh, “Electrodeposition of homogeneous and adherent polypyrrole/Na+-cloisite nanocomposite on iron electrodes,” Fibers and Polymers, vol. 13, no. 4, pp. 475–480, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. C. W. Macosko, Rheology: Principles, Measurements and Applications, John Wiley & Sons, New York, NY, USA, 1993.
  23. C. Dedeloudis, J. Fransaer, and J.-P. Celis, “Surface force measurements at a copper electrode/electrolyte interface,” Journal of Physical Chemistry B, vol. 104, no. 9, pp. 2060–2066, 2000. View at Google Scholar · View at Scopus
  24. A. M. L. Kraepiel, K. Keller, and F. M. M. Morel, “A model for metal adsorption on montmorillonite,” Journal of Colloid and Interface Science, vol. 210, no. 1, pp. 43–54, 1999. View at Publisher · View at Google Scholar · View at Scopus
  25. T. A. Green, A. E. Russell, and S. Roy, “The development of a stable citrate electrolyte for the electrodeposition of copper-nickel alloys,” Journal of the Electrochemical Society, vol. 145, no. 3, pp. 875–881, 1998. View at Google Scholar · View at Scopus
  26. C.-Q. Li, X.-H. Li, Z.-X. Wang, and H.-J. Guo, “Nickel electrodeposition from novel citrate bath,” Transactions of Nonferrous Metals Society of China, vol. 17, no. 6, pp. 1300–1306, 2007. View at Publisher · View at Google Scholar · View at Scopus
  27. O. Y. Zelenin, “Interaction of the Ni2+ ion with citric acid in an aqueous solution,” Russian Journal of Coordination Chemistry, vol. 33, no. 5, pp. 346–350, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Rode, C. Henninot, and M. Matlosz, “Complexation chemistry in nickel and copper-nickel alloy plating from citrate baths,” Journal of the Electrochemical Society, vol. 152, no. 4, pp. C248–C254, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Xuetao, W. Yu, S. Dongbai, and Y. Hongying, “Influence of pulse parameters on the microstructure and microhardness of nickel electrodeposits,” Surface and Coatings Technology, vol. 202, no. 9, pp. 1895–1903, 2008. View at Publisher · View at Google Scholar · View at Scopus