Table of Contents
International Journal of Manufacturing Engineering
Volume 2013 (2013), Article ID 824562, 9 pages
http://dx.doi.org/10.1155/2013/824562
Research Article

Improving the Performance of Reprocessed ABS Products from the Manufacturing Perspective via the Taguchi Method

1School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia
2Department of Mould Technology, Kolej Kemahiran Tinggi MARA, Balik Pulau, Genting, 11000 Balik Pulau, Penang, Malaysia
3School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia

Received 12 June 2013; Accepted 29 October 2013

Academic Editors: A. Lockamy, K. Salonitis, J. Tamaki, and H. Yu

Copyright © 2013 Ng Chin Fei et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ng Chin Fei, Nik Mizamzul Mehat, Shahrul Kamaruddin, and Zulkifli Mohamad Ariff, “Improving the Performance of Reprocessed ABS Products from the Manufacturing Perspective via the Taguchi Method,” International Journal of Manufacturing Engineering, vol. 2013, Article ID 824562, 9 pages, 2013. doi:10.1155/2013/824562