Research Article
An Investigation of Abrasive Water Jet Machining on Graphite/Glass/Epoxy Composite
Table 6
Mean value of top kerf widths (mm).
| Control parameter/levels | 1 | 2 | 3 |
| Pressure (MPa) | 0.885 | 0.972 | 1.01 | Feed rate (mm/min) | 0.995 | 0.964 | 0.906 | Abrasive concentration (%) | 0.948 | 0.958 | 0.957 | SOD (mm) | 0.874 | 0.937 | 1.053 |
|
|