Research Article
An Architecture for Hybrid Manufacturing Combining 3D Printing and CNC Machining
Table 1
M-codes needed for fused layer modeling (FLM).
| Command | Meaning |
| M104 P | Set hot-end temperature to |
| M106 P | Set speed of hot-end cooling fan to |
| M107 | Set hot-end cooling fan off |
| M109 P | Set hot-end temperature to and wait |
| M140 P | Set heating bed temperature to |
| M141 P | Set work space temperature to |
| M190 P | Set heating bed temperature to and wait |
| M191 P | Set work space temperature to and wait |
|
|