Table of Contents Author Guidelines Submit a Manuscript
International Journal of Photoenergy
Volume 2007 (2007), Article ID 27610, 5 pages
Research Article

Solar Module Fabrication

Silicon Technology Unit, 2 Boulevard Frantz Fanon, BP 140, Alger-7 merveilles, Algiers 16200, Algeria

Received 15 July 2006; Accepted 13 February 2007

Academic Editor: Nicolas Alonso-Vante

Copyright © 2007 A. El Amrani et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Data sheet Dupont de Nemours DuPontTMElvax® Grade Selection Guide for Adhesives, Sealants and Wax Blends pp3, 2005.
  2. I. J. Muirhead and B. K. Hawkins, “An assessment of photovoltaic power in the Telstra network,” Fuel and Energy Abstracts, vol. 37, no. 4, p. 278, 1996. View at Google Scholar
  3. N. M. Pearsall and R. Hill, “Photovoltaic modules, systems and applications,” in Clean Electricity from Photovoltaics, M. D. Archer and R. Hill, Eds., vol. 1 of Series on Photoconversion of Solar Energy, pp. 1–42, World Scientific, London, UK, 2001. View at Google Scholar
  4. Y. Mesbahi and A. El amrani, “Test d'homologation des modules UDTS,” Internal report, UDTS, Dubuque, Iowa, USA, 1998. View at Google Scholar
  5. H. Schmidhuber and K. Krannich, “Why using EVA for module encapsulation if there is a much better choice?,” in Proceedings of the 17th European Photovoltaic Solar Energy Conference and Exhibition, vol. 1, pp. 662–663, Munich, Germany, October 2001.