Research Article
Analysis on the Light-Scattering Effect in Dye-Sensitized Solar Cell according to the TiO2 Structural Differences
Table 1
The thickness of the TL and the LSL measured by the surface profiler.
| Samples | Transparent TiO2 layer (x, μm) | Light-scattering layer (y, μm) | Total thickness (μm) |
| Conventional (without light-scattering layer) | 8 ± 0.4 |
— | 8 ± 0.4 | LS1 (one doctor blade + one sintering) | 8 ± 0.4 | 5 ± 0.2 | 13 ± 0.6 | LS2 (two doctor blade + two sintering) | 8 ± 0.4 | 9 ± 0.3 | 17 ± 0.7 | LS3 (three doctor blade + three sintering) | 8 ± 0.4 | 13 ± 0.3 | 21 ± 0.7 |
|
|