Table of Contents Author Guidelines Submit a Manuscript
International Journal of Photoenergy
Volume 2014, Article ID 637468, 16 pages
http://dx.doi.org/10.1155/2014/637468
Research Article

New Multiphase Hybrid Boost Converter with Wide Conversion Ratio for PV System

1Applied Electronics Department, “Politehnica” University of Timisoara, 300223 Timisoara, Romania
2Electrical Engineering/Power Electronics Department, “Jade University,” University of Applied Sciences, 26389 Wilhelmshaven, Germany

Received 1 December 2013; Accepted 2 March 2014; Published 30 April 2014

Academic Editor: Ismail H. Altas

Copyright © 2014 Ioana-Monica Pop-Calimanu and Folker Renken. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Campoccia, L. Dusonchet, E. Telaretti, and G. Zizzo, “Comparative analysis of different supporting measures for the production of electrical energy by solar PV and Wind systems: four representative European cases,” Solar Energy, vol. 83, no. 3, pp. 287–297, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Andrejašič, M. Jankovec, and M. Topič, “Comparison of direct maximum power point tracking algorithms using en 50530 dynamic test procedure,” IET Renewable Power Generation, vol. 5, no. 4, pp. 281–286, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. S. S. W. Walker, N. K. Sooriyaarachchi, N. D. B. Liyanage, P. A. G. S. Abeynayake, and S. G. Abeyratne, “Comparative analysis of speed of convergence of MPPT techniques,” in Proceedings of the 2011 6th International Conference on Industrial and Information Systems (ICIIS '11), pp. 522–526, Kandy, Sri Lanka, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Liserre, T. Sauter, and J. Y. Hung, “Future energy systems: integrating renewable energy sources into the smart power grid through industrial electronics,” IEEE Industrial Electronics Magazine, vol. 4, no. 1, pp. 18–37, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. J. M. Carrasco, L. G. Franquelo, J. T. Bialasiewicz et al., “Power-electronic systems for the grid integration of renewable energy sources: a survey,” IEEE Transactions on Industrial Electronics, vol. 53, no. 4, pp. 1002–1016, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Das, V. K. Rajput, A. Chakraborty, M. Dhar, S. Ray, and R. Dutta, “A new transformerless DC-DC converter with high voltage gain,” in Proceedings of the 2010 International Conference on Industrial Electronics, Control and Robotics (IECR '10), pp. 91–94, December 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. O. Abdel-Rahim, M. Orabi, E. Abdelkarim, M. Ahmed, and M. Z. Youssef, “Switched inductor boost converter for PV applications,” in Proceedings of the 27th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '12), pp. 2100–2106, February 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. R. J. Wai, C. Y. Lin, R. Y. Duan, and Y. R. Chang, “High-efficiency dc-dc converter with high voltage gain and reduced switch stress,” IEEE Transactions on Industrial Electronics, vol. 54, no. 1, pp. 354–364, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. B. R. Lin and F. Y. Hsieh, “Soft-switching zeta-flyback converter with a buck-boost type of active clamp,” IEEE Transactions on Industrial Electronics, vol. 54, no. 5, pp. 2813–2822, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. K. C. Tseng and T. J. Liang, “Novel high-efficiency step-up converter,” IEE Proceedings: Electric Power Applications, vol. 151, no. 2, pp. 182–190, 2004. View at Publisher · View at Google Scholar
  11. T. F. Wu, Y. S. Lai, J. C. Hung, and Y. M. Chen, “Boost converter with coupled inductors and buck-boost type of active clamp,” IEEE Transactions on Industrial Electronics, vol. 55, no. 1, pp. 154–162, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. W. Li, X. Lv, Y. Deng, J. Liu, and X. He, “A review of non-isolated high step-up DC/DC converters in renewable energy applications,” in Proceedings of the 24th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '09), pp. 364–369, IEEE, February 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Tomaszuk and A. Krupa, “High efficiency high step-up DC/DC converters—a review,” Bulletin of the Polish Academy of Sciences: Technical Sciences, vol. 59, no. 4, pp. 475–483, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. R. J. Wai, W. H. Wang, and C. Y. Lin, “High-performance stand-alone photovoltaic generation system,” IEEE Transactions on Industrial Electronics, vol. 55, no. 1, pp. 240–250, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. V. M. E. Thirumurugan and S. B. E. Sugumar, “High-efficiency step-up converter by using PV system with reduced diode stresses sharing,” International Journal of Engineering and Advanced Technology, vol. 4, no. 2, pp. 319–324, 2014. View at Google Scholar
  16. Y. P. Hsieh, J. F. Chen, T. J. Liang, and L. S. Yang, “Novel high step-up dc-dc converter for distributed generation system,” IEEE Transactions on Industrial Electronics, vol. 60, no. 4, pp. 1473–1482, 2013. View at Publisher · View at Google Scholar
  17. S. M. Chen, T. J. Liang, L. S. Yang, and J. F. Chen, “A safety enhanced, high step-up DC-DC converter for AC photovoltaic module application,” IEEE Transactions on Power Electronics, vol. 27, no. 4, pp. 1809–1817, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Y. Tseng and H. Y. Wang, “A photovoltaic power system using a high step-up converter for DC load applications,” Energies, vol. 6, no. 2, pp. 1068–1100, 2013. View at Google Scholar
  19. S. M. Chen, T. J. Liang, L. S. Yang, and J. F. Chen, “A cascaded high step-up DC-DC converter with single switch for microsource applications,” IEEE Transactions on Power Electronics, vol. 26, no. 4, pp. 1146–1153, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. P. Hsieh, J. F. Chen, T. J. Liang, and L. S. Yang, “A novel high step-up DC-DC converter for a microgrid system,” IEEE Transactions on Power Electronics, vol. 26, no. 4, pp. 1127–1136, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. K. Varuna and S. Kumar, “Modeling & simulation of grid connected photovoltaic system using high step up DC/DC converter,” International Journal of Latest Advances in Electronic and Electric Engineering, vol. 2, no. 2, pp. 153–158, 2013. View at Google Scholar
  22. B. Axelrod, Y. Berkovich, and A. Ioinovici, “Switched-capacitor/switched-inductor structures for getting transformerless hybrid DC-DC PWM converters,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 55, no. 2, pp. 687–696, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Huber and M. M. Jovanovic, “Design approach for server power supplies for networking applications,” in Proceedings of the 15th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '00), pp. 1163–1169, February 2000. View at Scopus
  24. F. Renken and V. Karrer, “DC/DC converters for automotive board-net structures,” in Proceedings of the International Power Electronics and Motion Control Conference (EPE-PEMC '04), Riga, Latvia, September 2004.
  25. F. Renken, “High temperature electronics for future hybrid drive systems,” in Proceedings of the 13th European Conference on Power Electronics and Applications (EPE '09), pp. 1–7, Barcelona, Spain, September 2009.
  26. L. Huber and M. M. Jovanovic, “Design approach for server power supplies for networking applications,” in Proceedings of the 15th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '00), pp. 1163–1169, New Orleans, La, USA, February 2000. View at Scopus
  27. K. P. Yalamanchili, M. Ferdowsi, and K. Corzine, “New double input DC-DC converters for automotive applications,” in Proceedings of the 2006 IEEE Vehicle Power and Propulsion Conference (VPPC '06), Windsor, UK, September 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Gavriş, O. Cornea, and N. Muntean, “Multiple input DC-DC topologies in renewable energy systems—a general review,” in Proceedings of the 3rd IEEE International Symposium on Exploitation of Renewable Energy Sources (EXPRES '11), pp. 123–128, Subotica, Serbia, March 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. M. J. V. Vázquez, J. M. A. Márquez, and F. S. Manzano, “A methodology for optimizing stand-alone PV-system size using parallel-connected DC/DC converters,” IEEE Transactions on Industrial Electronics, vol. 55, no. 7, pp. 2664–2673, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. T. Hosi, “Control circuit for parallel operation of self-commutating inverters,” Japanese Patent S56-13101, 1975.
  31. R. Gules, J. D. P. Pacheco, H. L. Hey, and J. Imhoff, “A maximum power point tracking system with parallel connection for PV stand-alone applications,” IEEE Transactions on Industrial Electronics, vol. 55, no. 7, pp. 2674–2683, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. S. V. G. Oliveira and I. Barbi, “A three-phase step-up DC-DC converter with a three-phase high frequency transformer,” in Proceedings of the IEEE International Symposium on Industrial Electronics 2005 (ISIE '05), vol. 2, pp. 571–576, June 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. P. Thounthong and B. Davat, “Study of a multiphase interleaved step-up converter for fuel cell high power applications,” Energy Conversion and Management, vol. 51, no. 4, pp. 826–832, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Y. Choe, J. S. Kim, H. S. Kang, and B. K. Lee, “An optimal design methodology of an interleaved boost converter for fuel cell applications,” Journal of Electrical Engineering and Technology, vol. 5, no. 2, pp. 319–328, 2010. View at Google Scholar · View at Scopus
  35. H. B. Shin, J. G. Park, S. K. Chung, H. W. Lee, and T. A. Lipo, “Generalised steady-state analysis of multiphase interleaved boost converter with coupled inductors,” IEE Proceedings: Electric Power Applications, vol. 152, no. 3, pp. 584–594, 2005. View at Publisher · View at Google Scholar
  36. T. Soepraptob, S. Sidopeksoc, and M. Taufik, “A Comparison of multiple boost configurations for small renewable energy battery storage systems,” in Proceedings of the International Conference on Sustainable Energy Engineering and Application, pp. 93–96, Yogyakarta, Indonesia, 2012.
  37. W. Xiao, B. Zhang, and D. Qiu, “Analysis and design of an automatic-current-sharing control based on average-current mode for parallel boost converters,” in Proceedings of the CES/IEEE 5th International Power Electronics and Motion Control Conference (IPEMC '06), pp. 1293–1297, August 2006. View at Publisher · View at Google Scholar · View at Scopus
  38. T. Taufik, R. Prasetyo, D. Dolan, and D. Garinto, “A new multiphase multi-interleaving buck converter with bypass LC,” in Proceedings of the 36th Annual Conference of the IEEE Industrial Electronics Society (IECON '10), pp. 291–295, Phoenix, Ariz, USA, November 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. Z. Lukí, S. M. Ahsanuzzaman, A. Prodí, and Z. Zhao, “Self-tuning sensorless digital current-mode controller with accurate current sharing for multi-phase DC-DC converters,” in Proceedings of the 24th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '09), pp. 264–268, Washington, DC, USA, February 2009. View at Publisher · View at Google Scholar · View at Scopus
  40. P. L. Wong, P. Xu, B. Yang, and F. C. Lee, “Performance improvements of interleaving VRMs with coupling inductors,” IEEE Transactions on Power Electronics, vol. 16, no. 4, pp. 499–507, 2001. View at Publisher · View at Google Scholar · View at Scopus
  41. T. Taufik, T. Gunawan, D. Dolan, and M. Anwari, “Design and analysis of two-phase boost DC-DC converter,” in World Academy of Science, Engineering and Technology, pp. 912–916, 2010. View at Google Scholar
  42. F. Renken, V. Karrer, and P. Skotzek P, “The starter generator—systems, functions and components,” in Proceedings of the 30th FISITA World Automotive Congress, Barcelona, Spain, May 2004.
  43. V. Karrer and F. Renken, “Power electronics for the integrated starter generator,” in Proceedings of the Optimization of the Power Train in Vehicles by Using the Integrated Starter Generator (ISG '02), pp. 222–247, Haus der Technik e. V., Munich, Germany, 2002.
  44. F. Renken, “Analytic calculation of the DC-link capacitor current for pulsed single-phase H-bridge inverters,” European Power Electronics and Drives Journal, vol. 13, no. 4, pp. 13–19, 2003. View at Google Scholar · View at Scopus
  45. F. Renken, “Analytic calculation of the DC-link capacitor current for pulsed single-phase H-bridge inverters,” European Power Electronics and Drives Journal, vol. 13, no. 4, pp. 13–19, 2003. View at Google Scholar · View at Scopus
  46. F. Renken, “Analyses of the DC-link current in discontinuous modulated three-phase inverters,” in Proceedings of the 12th International Power Electronics and Motion Control Conference (EPE-PEMC '06), Portorož, Slovenia, August-September 2006. View at Publisher · View at Google Scholar
  47. F. Renken, “DC-link current in pulsed H-bridge inverters,” in Proceedings of the International Exhibition & Conference for Power Electronics, Intelligent Motion and Power Quality (PCIM '09), Nürnberg, Germany, May 2009.
  48. “CASPOC Simulation program,” http://www.caspoc.com/.