Photostability and Photostabilization of Drugs and Drug Products

Ahmad, Iqbal; Ahmed, Sofia; Anwar, Zubair; Sheraz, Muhammad Ali; Sikorski, Marek

doi:https://doi.org/10.1155/2016/8135608

International Journal of Photoenergy

On this page

Abstract Introduction Conclusions Acknowledgments References Copyright Related Articles

Review Article | Open Access

Volume 2016 | Article ID 8135608 | https://doi.org/10.1155/2016/8135608

Photostability and Photostabilization of Drugs and Drug Products

Iqbal Ahmad,¹Sofia Ahmed,¹Zubair Anwar,¹Muhammad Ali Sheraz,¹and Marek Sikorski²

Academic Editor: Adel A. Ismail

Received27 Oct 2015

Accepted29 Feb 2016

Published17 May 2016

Abstract

Photostability studies of drugs and drug products are an integral part of the product development process in the pharmaceutical industry. These studies are carried out to ensure quality, efficacy, and safety of the formulated products during manufacture, storage, and use. This review deals with the concept of photostability and related aspects and the literature available in the field. It highlights the role of the photochemistry in the photostability studies, describes the functional groups important for the photoreactivity of drugs, explains photophysical processes, and deals with the kinetics of photochemical reactions. The various modes of photodegradation of drugs with examples of selected compounds are presented. The biological consequences of the effect of light on the drug degradation are described. The photostability testing of drugs and drug products and the requirements under ICH guideline are discussed. Some information on the packaging requirements for the formulated products is provided. The various methods used for the photostabilization of solid and liquid dosage forms are also discussed.

1. Introduction

A large number of drugs are sensitive to light [1, 2] and therefore their formulated products may degrade during manufacturing, storage, and administration. This may result in potency loss, altered efficacy, and adverse biological effects. The European Pharmacopoeia [3] prescribes light protection for more than 250 drugs and adjuvants. Knowledge of the photochemical behavior of drugs can provide guidance for handling, packaging, and labeling of drug products. The use of the appropriate containers and packaging material can protect the products from the deleterious effects of light. The sensitivity of a drug to a particular spectral region of light may vary with its chemical structure, photoreactivity, and nature of the dosage form. The rate of a photochemical reaction may be influenced by the intensity/wavelengths of the radiation source and the transmission characteristics of the container. The study of the photochemical reactions may provide information on the mode of stabilization of the active ingredients in a product. These reactions are often complex and involve free radical species that form photoproducts [4–6]. Photosensitized reactions may also lead to the degradation of the drug substances [6]. The photoproducts of a drug may be harmful and cause phototoxic, photoallergic, or photosensitization reactions upon administration [7–9]. These reactions may also be initiated by the interaction of a drug with endogenous substances in the body in the presence of light. The evaluation of the photochemical stability of drugs and drug products is an essential component of the formulation development process in the pharmaceutical industry. Several monographs [10–12], details [13–23], and reviews [24–29] have been published on the photochemistry, photostability, and related aspects of the drugs and drug products. Information on the photosensitivity, photostability, and storage of pharmaceuticals is also provided in the pharmacopoeias [1–3] and other literature [14, 30, 31].

2. Photostability

The photostability of a drug substance may be defined as the response of the drug or drug product to the exposure to solar, UV, and visible light in the solid, semisolid, or liquid state that leads to a physical or chemical change.

The response of the drug to light absorption and excitation can be considered in terms of photodegradation (photolysis) reactions through the formation of free radicals or photosensitization reactions by intermolecular energy transfer. These reactions involve primary (photochemical) and secondary (chemical) reactions that give the final products.

2.1. Objectives of the Photostability Studies

In view of the photosensitivity and photoinstability of drugs and adjuvants, knowledge of the photostability of these substances and their formulated products is necessary to evaluate the following:(i)The intrinsic photostability characteristics.(ii)The physical and chemical changes upon the exposure to light.(iii)The photodegradation pathways and mechanisms.(iv)The shelf life of the products.(v)The efficacy of the stabilizing agents in photostabilization.(vi)The need for modification of the formulation parameters.(vii)The need for the measures to overcome the effects of the light exposure during manufacturing, packaging, labeling, transportation, and storage.(viii)The light-induced biological effects.(ix)The primary and secondary package design.

2.2. Requirements for the Photostability Studies

Consider the following:(i)The solubility of the drug and choice of reaction medium.(ii)The spectral characteristics of the drug molecule.(iii)The sensitivity of the drug molecule to the solar, UV, and visible light.(iv)The reaction vessel and the radiation source appropriate for the spectral characteristics of the drug molecule.(v)The knowledge of the photodegradation mode and the nature of the photoproducts from the preliminary studies.(vi)A validated stability-indicating assay method to determine the intact drug and the photoproducts in the degraded material.

3. Photochemical Reactions

The photochemistry of the organic compounds has been studied for a long time [32–36] and an advanced treatment of this subject is available [6, 37]. The study of the photochemistry provides a basis for the understanding of the photochemical reactions of the drug substances that affect their stability and efficacy.

Photochemical reactions may lead to the degradation of the drug substances by one or more pathways to form different products. The elucidation of the mechanisms of these pathways requires a thorough understanding of the nature and type of the photochemical reactions involved. These would largely depend on the presence of certain functional groups, physical characteristics (light absorption, , solubility, etc.), and the degradation mode of the compound. The assessment of the photostability of the drug substances is based on the study of all those factors that determine the rates and mechanisms of the underlying photochemical reactions.

3.1. Spectral Regions of the UV, Visible, and Solar Radiation

The spectral regions of the UV, visible, and solar light involved in the photochemical reactions are as follows: UVA: 320–400 nm. UVB: 290–320 nm. UVC: 200–290 nm. Visible: 400–700 nm. Solar: including UVA, UVB, and visible ranges.The majority of the photochemical reactions occur with the help of the UVA, UVB, or visible light.

3.2. Chemical Groups Important for the Photoreactivity of the Drug Molecules

The presence of the following chemical functional groups in the drug molecules [10] is usually necessary for the occurrence of photochemical reactions:(i)Double bond, C=C (oxidation/isomerization).(ii)Carbonyl group, C=O group (reduction/fragmentation).(iii)Aryl chloride, C₆H₄Cl₂ (homolytic/heterolytic dechlorination).(iv)Nitroaromatic group, –C₆H₄NO₂ (hydrogen abstraction/nitrite ester rearrangement).(v)A weak C–H bond (photoinduced fragmentation via hydrogen atom transfer or electron-proton transfer).(vi)Sulfides, alkenes, polyenes, and phenols (highly reactive with singlet oxygen, photochemically formed from the ground-state triplet oxygen).

3.3. Photophysical Processes

It is necessary to understand the various photophysical processes involved in the absorption and dissipation of the light energy (see (1)–(7)) that have been described by Moore [38]. These may be followed by additional reactions forming free radicals and subsequently the final products (see (8)–(11)), as a result of the photodegradation of the drug substances.

(i) Absorption:

(ii) Internal conversion:

(iii) Fluorescence:

(iv) Photoionization:

(v) Intersystem crossing:

(vi) Internal conversion:

(vii) Phosphorescence:

(viii) Radical formation:

(ix) Final products:

Upon the absorption of a photon at a specific wavelength in the UV or visible range, a molecule in the ground state () is promoted to the singlet excited state (¹A), with the electron spins remaining antiparallel (see (1)). The molecule in the singlet excited state may dissipate its energy within nanoseconds by different physical process and thus get deactivated. This may happen by internal conversion (IC) (see (2)), a nonradiative transition to the ground state, or photon emission (fluorescence) leading back to the ground state (see (3)). The excess energy in the excited state may also be dissipated as heat on collision with neighboring molecules by vibrational relaxation (VR). Since the ionization potential of the molecule is lower in the singlet excited state, it is easier to remove an electron from an excited rather than from the ground state. This occurs in the presence of an electron acceptor as a result of photoionization (see (4)), particularly in molecules having an anionic state. Another process that can occur from the singlet excited state is the intersystem crossing (ISC) to a metastable triplet excited state (³A) with parallel electron spins (see (5)). The ISC is highly efficient for the photochemically active molecules. The triplet excited state with its lifetime in the microsecond to second range has a greater probability for the reaction with other molecules. Alternatively, it can return back to the ground state by another ISC (see (6)) or by phosphorescence emission (see (7)). Further photochemical processes involving the triplet excited state may lead to the formation of cationic and anionic radicals (see (8)) and neutral (oxidized) (see (9)) and reduced free radicals (see (10)). The reduced free radicals may react to form the final products (see (11)). The triplet excited state is a more powerful electron donor or acceptor than the ground state of a molecule. All these processes occur mostly within nanosecond to seconds after the excitation and may be studied by laser flash photolysis, time-resolved spectroscopy, and other techniques [39].

3.4. Kinetics of the Photochemical Reactions

The preformulation studies in the drug development also include the photostability testing of the drug substances. This is necessary to evaluate their overall photosensitivity and to ascertain the rate at which they degrade under specific experimental conditions. These aspects involve the study of the kinetics of the photodegradation reactions. The rate of a photochemical reaction depends on the number of photons absorbed per second and the quantum yield of the reaction . Moore [40] has presented the following kinetic treatment for the photochemical reactions that can be applied to the degradation of the drug molecules.

The rate of a photochemical reaction may be expressed as

The value of at a particular wavelength is given bywhere and are the incident and the transmitted light intensities, respectively, and is the absorbance of the sample at the irradiation wavelength.

is directly proportional to the concentration at low absorbance values (), provided that the substance follows Beer’s law relation between the absorbance and the concentration: where is the molar absorptivity at the wavelength , is the molar concentration of the absorbing species, and is the optical path length of the reaction vessel. Since and vary with the wavelength, (14) integrated over the relevant wavelength range gives

The overlap integral is a constant for a particular combination of the photon source and the absorbing substance; is obtained from the reaction vessel used; and is the reaction property. On combining the constant terms into an overall constant , the expression may be stated in the form of a first-order equation:

The compliance of the analytical data to the first-order kinetics may be confirmed by the linearity of the plot of log versus with the slope equal to .

The factors that influence the rate of a photochemical reaction include the concentration of the drug, the volume of sample, the quantum yield of the photochemical reaction, and the intensity and spectral distribution of the light source. These have been discussed in detail by Beijersbergen van Hanegowen [41].

4. Photodegradation Reactions

Many drug substances of diverse molecular structure have been found to be photoreactive. They undergo degradation reactions in aqueous and organic solvents by various pathways upon exposure to light. These reactions may proceed through free radical intermediates, involving several steps to form the final products. The major modes of the photodegradation of drugs are as follows:(i)Photoaddition (e.g., riboflavin).(ii)Photoaquation (e.g., cyanocobalamin).(iii)Photocyclization (e.g., meclofenamic acid).(iv)Photodealkylation (e.g., chloroquine).(v)Photodecarboxylation (e.g., amino acids).(vi)Photodehalogenation (e.g., norfloxacin).(vii)Photodehydrogenation (e.g., nifedipine).(viii)Photodimerization (e.g., primaquine).(ix)Photoelimination (e.g., mefloquine).(x)Photoinduced hydrolysis (e.g., sulfacetamide).(xi)Photoisomerization (e.g., aztreonam).(xii)Photooxidation (e.g., benzaldehyde).(xiii)Photoinduced rearrangement (e.g., benzydamine).(xiv)Photoreduction (e.g., riboflavin).(xv)Photoinduced ring cleavage (e.g., norfloxacin).

In some of the photodegradation reactions, more than one pathway may be involved; for example, the hydrolysis of sulfacetamide is followed by oxidation, the reduction of riboflavin is followed by oxidation, the oxidation of furosemide is followed by reduction, and the ring cleavage of fluoroquinolones is followed by oxidation. The photodegradation of the drug substances may occur by zero-order, first-order, and second-order reactions or by simultaneous (parallel) reactions to give two or three products and by consecutive reactions involving intermediate species to give the final product. Several examples of the photodegradation reactions of the drug substances involving different mechanisms have been reported [10–12, 16, 18–21, 27]. Some examples of the photodegradation reactions are presented in this section.

4.1. Photoaddition Reactions: Riboflavin

Riboflavin (RF) (1) undergoes photodegradation by the photoaddition pathway in the presence of divalent ions such as and to form cyclodehydroriboflavin [CDRF] at pH values > 6.0 [42]. The intramolecular photoaddition of the C–2′ hydroxyl group occurs at periposition C in the benzene ring. The reaction occurs via a RF– complex (2) which creates sterically favorable condition for C/O(2′α)-interaction [42]. The involvement of the singlet excited state of RF [] in this reaction has been suggested based on the quenching experiments. The RF– complex leads to the formation of a dihydroflavin intermediate (3) which upon autooxidation gives rise to CDRF (4). The presence of the ions may facilitate the reorientation of the C–2′ hydroxyl group to affect the photoaddition [Figure 1]. The kinetics of the photoaddition reactions of RF has been studied [43].

4.2. Photoaquation Reactions: Cyanocobalamin

Cyanocobalamin (vitamin B₁₂) is sensitive to light and its photochemical conversion to hydroxocobalamin (vitamin ) takes place in aqueous solutions [14, 44, 45]. The sequence of the photodegradation reactions of B₁₂ [46] is presented as follows:

According to this scheme, B₁₂ is excited to the singlet state (17) followed by its transformation to the triplet excited state by ISC (18). The ³[Co³⁺ CN] may react with a molecule of H₂O and undergoes photoaquation to form (19), which exists in equilibrium with aquocobalamin ( 7.8) in aqueous solutions (20). In the photoaquation reaction, the CN⁻ group is removed with its full complement of electrons and is replaced by a water molecule without any change in the oxidation state of cobalt. This reaction takes place by the absorption of light to cause a transition in the corrin ring. The [Co³⁺ OH] molecule may be oxidized to corrin ring cleavage products (21). The photodegradation reaction of B₁₂ is pH dependent, as B₁₂ is a polyacidic base with six weakly basic amide groups and has of 3.3 [47]. In the acidic pH range, the molecule exists as a cation [B₁₂ H⁺] due to the ionization of the 5,6-dimethylbenzimidazole moiety. The rates of the photodegradation reactions depend on the ionization state of the molecule in the pH 1–12 range [45].

4.3. Photocyclization Reactions: Meclofenamic Acid

Exposure of aqueous solutions of meclofenamic acid (5) (N-(2,6-dichloro-m-tolyl)anthranilic acid) to UV or visible light results in the dehydrohalogenation and cyclization to form approximately equimolar amounts of 8-chloro-5-methylcarbazole-1-carboxylic acid (6) and 8-chloro-7-methylcarbazole-1-carboxylic acid (7) [48] [Figure 2].

4.4. Photodealkylation Reaction: Chloroquine

Chloroquine (8) undergoes photochemical degradation in aqueous solutions (pH 7.4) on irradiation with 240–600 nm light. The major reaction leads to N-dealkylation to give several products including (9)–(11), which have been identified by MS and NMR spectrometry [49]. Some of the dealkylation reactions are shown in Figure 3.

4.5. Photodecarboxylation Reactions: Amino Acids

Aliphatic amino acids undergo decarboxylation to produce carbon dioxide and an aldehyde by riboflavin (RF) sensitized photooxidation [50]:

RF on light absorption is excited to the singlet state [¹RF] which may be converted to the triplet excited state [³RF] by intersystem crossing (ISC). [³RF] reacts with the amino acids and causes their oxidation according to the reactions expressed by (22) and (23).

4.6. Photodehalogenation Reactions: Norfloxacin

Fluoroquinolones contain at least one fluorine atom and undergo defluorination in neutral solutions [51]. Norfloxacin (12) on irradiation in aqueous solutions (pH 7.2) is degraded slowly by defluorination (). The process involves solvolysis at position 6 (13) [52] [Figure 4].

4.7. Photodehydrogenation Reactions: Nifedipine

Visible irradiation of nifedipine (14) in 95% ethanol results in the dehydrogenation of the molecule. The degradation is fastest in aqueous solutions at pH 2.0 [53]. The degradation products have been identified by ¹H– and ¹³C– NMR studies as 4-(2-nitrosophenyl)pyridine (15) and its oxidation product 4-(2-nitrophenyl)pyridine (16) derivatives [54] [Figure 5].

4.8. Photodimerization Reactions: Primaquine

The photochemical stability of primaquine (17) has been studied by irradiating the aqueous solutions of primaquine diphosphate (pH 7.4) with a 120 W high-pressure mercury lamp (emission at 320–600 nm). It gives numerous products including the dimer (18) that has been identified by GC/MS and NMR spectrometry [55]. The dimerization reaction is shown in Figure 6.

4.9. Photoelimination Reactions: Mefloquine

Mefloquine (19) in aqueous solutions undergoes photoelimination to form 2,8-bis(trifluoromethyl)-4-hydroxyquinoline (20) [56] [Figure 7].

4.10. Photoinduced Hydrolysis Reactions: Sulfacetamide

Sulfacetamide (21) on UV irradiation in aqueous solutions is hydrolyzed to sulfanilamide (22) [57] [Figure 8].

4.11. Photoisomerization Reactions: Aztreonam

Aqueous solutions (pH 5.0) of aztreonam (23) (a third-generation cephalosporin) undergo syn-anti-isomerization (24) on UV irradiation involving the alkoxyimino group in the side chain [58] [Figure 9].

4.12. Photooxidation Reactions

4.12.1. Photooxidation of Benzaldehyde

The photooxidation of drugs by UV radiations usually involves a free radical mechanism, as reported for benzaldehyde [59]. In the free radical chain process, a sensitizer abstracts a hydrogen atom from the drug molecule (see (24)). The free radical of the drug next reacts with molecular oxygen to form a hydroperoxide radical (see (25)). The chain reaction is propagated by removing hydrogen atom from another molecule of the oxidant (see (26)). The hydroperoxide radicals then react further to form inert products (see (27)). The following equations show initiation, propagation, and termination steps in the chain reaction involved in the photooxidation of benzaldehyde:

4.12.2. Photooxidation of Menadione

Menadione (vitamin K₃) (25) is oxidized in aqueous solutions (pH 6–12) on UV irradiation to give 2-methyl-2,3-epoxy-1,4-naphthoquinone (26) [60] [Figure 10].

4.13. Photoinduced Rearrangement Reactions: Benzydamine

Benzydamine (27) on UV irradiation in aqueous solutions undergoes rearrangement to give product (28) [61] [Figure 11].

4.14. Photoreduction Reactions: Riboflavin

A detailed study of the photoreduction reaction of riboflavin (RF) (1) in aqueous and organic solvents has been made [62–74].

A reaction scheme for the photodegradation of RF by the photoreduction pathway is shown in Figure 12. RF on light absorption is promoted to the singlet excited state [¹RF] which may be converted to the triplet excited state [³RF] (29). The [³RF] abstracts a hydrogen atom by intramolecular transfer from the C-2′ atom of the ribityl side chain to N-1 of the isoalloxazine ring leading to the formation of the biradical (30), earlier suggested by Brdička [75] in the photolysis of RF through polarographic studies. The biradical is oxidized to form formylmethylflavin [FMF] (31), an intermediate product isolated by Smith and Metzler [76]. FMF is hydrolyzed to lumichrome [LC] (32) in acid solutions and LC and lumiflavin [LF] (33) in alkaline solutions [77–79]. It is also oxidized to carboxymethylflavin [CMF] (34) in aqueous solutions [79, 80]. The rate-pH profile indicates a greater susceptibility of RF to photodegradation in the alkaline solutions as a result of the sensitivity of [³RF] to alkaline hydrolysis [81].

4.15. Photoinduced Ring Cleavage Reactions: Norfloxacin

Norfloxacin (12) on UV irradiation in aqueous solutions undergoes piperazine ring cleavage to give product (35) [51] [Figure 13].

5. Biological Effects of the Photoinstability

The biological consequences of the action of light on drugs undergoing photodegradation are important. These include several adverse biological reactions involving phototoxicity, photoallergy, photosensitization, and others [7–9, 82–87]. UV radiation present in the sunlight is usually classified into different spectral ranges including UVA (320–400 nm), UVB (290–320 nm), and UVC (270–290 nm). UVC radiation is absorbed by ozone and is thus absent at the sea level. UVA radiations involve longer wavelengths than those of UVB and are less harmful. UVB radiations may affect human skin and can produce erythema, edema, and pigmentation [88]. UVB may also cause photoaging, immunosuppression, and photocarcinogenesis [85, 89]. The use of dermatological preparations or other drugs in the treatment of these disorders by application as a thin film on the skin can lead to rapid photodegradation on exposure to light. This may make them ineffective or form toxic photodegradation products affecting the skin. The list of some drugs causing adverse biological reactions [8, 84] is given in Table 1.

Kullavanijaya and Lim [9] have suggested the use of the sunscreen agents containing UV light filters for the photoprotection of the human skin. An ideal sunscreen agent should be photochemically stable and dissolve in a suitable vehicle. The photostability of the product depends on the nature of the UV filter. One of the first widely used sunscreen filters is para-aminobenzoic acid (PABA) ( = 283 nm). It is soluble in water and is very effective against UVB radiations at 5% concentration in 50–60% alcohol base [90]. However, PABA causes photoallergy and is a potent carcinogen; therefore, its use in sunscreen products is limited [91]. The commonly used UV filters nowadays include avobenzone, octinoxate, and octyl dimethyl PABA. These compounds are photolabile, being rapidly destroyed on exposure to UV light [92–94]. Some of the photostable filters include terephthalylidene dicamphor sulfonic acid (Mexoryl SX), drometrizole trisiloxane (Mexoryl XL), methylene-bis-benzotriazolyl tetramethylbutylphenol (Tinosorb M), and bis-ethylhexyloxyphenol methoxyphenol triazine (Tinosorb S) [92]. ZnO, TiO₂, octocrylene, salicylates, and methylbenzylidene camphor have been found to increase the photostability of the sunscreen products [9]. The organic sunscreen agents may interact with the skin on exposure to light and induce adverse biological reactions resulting in photoallergy, phototoxicity, and photosensitivity [95–101]. Therefore, care should be exercised in the selection of the sunscreen agents by consultation with a dermatologist. The Food and Drug Administration, USA, has provided a list of 16 agents for use as sunscreens including UVA and UVB filters [101]. A list of common UV filters approved in Australia, Europe, Japan, and the United States is also available [102].

6. Packaging Requirements

The light sensitivity of the drug substances requires the use of an effective packaging system to protect them from photochemical damage. The pharmacopoeias [1–3] prescribe conditions for containers (e.g., light-resistant) and storage (e.g., protected from light) for the light-sensitive drugs and formulated products. The requirements for a packaging system for pharmaceuticals differ from product to product, that is, solid or liquid dosage form. There is a greater chance of interaction between a liquid dosage form and the container than that of the solid dosage form. The efficacy of a packaging system for a particular drug or product may be evaluated by performing photostability studies. Protection of a product from light can be achieved by the use of an opaque or amber-colored container. Amber glass is suitable for drugs absorbing in the UV region as it transmits light above about 470 nm. An opaque secondary package may also be used for this purpose.

Light transmission tests may be applied to evaluate the light transmission characteristics of containers to be used for photosensitive drugs [2]. Templeton et al. [28] have discussed the implications of photostability on the manufacturing, packaging, and storage of formulated products, emphasizing the need for appropriate measures to protect photosensitive products during these processes.

7. Photostability Testing

Photostability testing of drug substances and formulated products is an integral part of the development process in industry to ensure their quality during the shelf life period. It is carried out under standardized conditions to determine the extent to which the drug or the product undergoes an undesirable chemical change. Photostability testing is undertaken to evaluate the overall photosensitivity of the pharmaceuticals for the development and validation purposes and to provide information necessary for handling, packaging, and labeling [11]. “ICH Harmonized Tripartite Guideline for Photostability Testing of New Drug Substances and Products” [103] has stated the importance of light testing as an integral part of stress testing. It is necessary to determine the intrinsic photostability characteristics of the new drug substances and products during the development process and to demonstrate that light exposure does not result in an unacceptable change. Another objective of this study is to demonstrate whether precautionary measures in manufacturing, packaging, and labeling of the products are needed to overcome changes due to light exposure [104].

Photostability testing of drug substances and products is conducted according to ICH Q1B guideline [103], with the choice of an appropriate light source being an important consideration for the uniformity of the results. The photodegradation of a drug in a product is a function of the spectral distribution and the intensity of the light source. Therefore, the use of specific light sources is necessary to achieve harmony in the evaluation of photostability. ICH guideline specifies the use of an artificial daylight fluorescent lamp, a xenon lamp, or a metal halide lamp emitting in the UV and visible region with an output similar to that of the standard daylight lamp D65/ID65. Any radiation emitted below 320 nm should be eliminated by the use of an appropriate filter. Alternatively, a cool white fluorescent lamp (emission ~320–800 nm) or a near UV lamp (emission 320–400 nm) with the maximum emission between 350 and 370 nm should be used. The details of the photostability testing procedures for the drug substances and drug products are stated in the ICH guideline [103].

Several publications have dealt with the light sources, their spectral distribution and use [20, 40, 105–111], photostability chambers [104, 112, 113], and experimental conditions [28, 108, 114–117] for the photostability testing.

Various aspects of the photostability testing in relation to the application of the ICH guidelines have been discussed [17, 20, 25, 118–123] and there is a need to improve the guideline in the light of these studies. The application of the photostability testing in the pharmaceutical industry is necessary to ensure the potency, the efficacy, and the safety of the manufactured products in their clinical use.

8. Photostabilization

The photosensitivity of the drug substances and the solid and liquid dosage forms makes it necessary to adopt appropriate measures for their stabilization during manufacturing, compounding, and storage. The common approach to afford photostabilization of pharmaceuticals is to protect them from light by using suitable primary and secondary packaging. The various methods of photostabilization [12, 27, 124, 125] and photoprotection [9, 20] have already been reviewed and are briefly presented in the following sections.

8.1. Spectral Overlay

The photosensitive drugs or products can be protected by reducing the amount of the undesirable light impinging on the material. This can be achieved by the application of the principle of the spectral overlay to the pharmaceutical formulations [126]. It is based on the use of excipients that exhibit the absorption spectra similar to that of the drug. This results in the absorption of light by the excipients at the expense of the drug and thus protecting it from photodegradation. Molsidomine tablets have been stabilized by adding the UV absorber Eusolex 9020 [4-(t-butyl-4′-methoxydibenzoyl)-methane] [127]. These tablets have also been stabilized by the addition of riboflavin absorbing light in the UV and visible region [128]. The photostabilization of diclofenac gel has been achieved by the use of a UV absorber, 3-(4-methylbenzylidene)-camphor (Eusolex 6300) [129]. Food colorants have been employed as photostabilizing agents for the oral dosage forms for the UV and visible ranges [130]. Ubidecarenone has been stabilized by α-(o-tolylazo)-β-naphthylamine in a dry emulsion [131].

8.2. Use of Opacifying and Coating Agents

Thoma [124] and Thoma and Spilgies [127] have discussed the use of opacifying and coating agents in the photostabilization of drugs in various dosage forms. The yellow, red, and black iron oxides have been employed as opacifiers for the protection of sorivudine, molsidomine, and nifedipine tablets [132]. The photoprotective effect of these pigments depends on their particle size which influences the light absorption and scattering capacity. These are most effective on even distribution over the surface of the drug particles in the tablet matrix [127]. The photoprotection of the solid dosage forms may also be achieved by the use of opaque blisters and capsules [133–136]. The opaqueness of the material can be produced by the use of a suitable dye with an absorption spectrum similar to that of the drug or by the use of a reflecting pigment such as titanium dioxide. The addition of UV and visible absorbing opacifiers is also useful in the case of creams, ointments, and liquid formulations [20].

Another method of photostabilization of the tablet formulations involves film coating with agents possessing light absorption or reflection properties. The protective effect of the film coating depends on its absorption, which is related to the film thickness and concentration of the absorbing/reflecting excipient [127]. Film coatings have been used for the photoprotection of sulfisomidine [137], nifedipine [135, 138], and other drugs [139].

8.3. Complex Formation

Complex formation between photosensitive drugs and complexing agents is among the earlier methods for the stabilization of drugs. Caffeine has been employed as a complexing agent for the photostabilization of riboflavin, a highly photosensitive drug. It is most stable in the complex form in aqueous solution, being suitable for pharmaceutical formulations [140]. Caffeine complexation has been reported by several workers and occurs by the formation of stacking complexes [141–144]. Riboflavin also forms a complex between the ribityl side chain and boric acid resulting in the photostabilization of the vitamin [145, 146].

8.4. Cyclodextrin Complexation

The photostabilization of drugs by the cyclodextrin inclusion complexation has been discussed by Thoma [124], Yoshioka and Stella [18], and Sheraz et al. [29]. Cyclodextrins are nonreducing cyclic oligosaccharides that consist of six (α-CD), seven (β-CD), or eight (γ-CD) dextrose units. Internally these molecules are relatively hydrophobic, while externally relatively hydrophilic. This structure imparts to them the capability of forming inclusion complexes with the drug molecules and thus provides photoprotection for the latter [18].

Numerous examples of the photostabilization of drugs by cyclodextrin complexation have been reported. These include the complexation of clofibrate with β- and γ-CD in the solid state [147], nifedipine, pyridoxine HCl, and retinol acetate with β-CD in aqueous solutions and in the solid state [148], doxorubicin with γ-CD in aqueous solutions [149], daunorubicin with octakis (2,6-di-o-methyl)-γ-CD in acidic solutions [150], mitomycin C with γ-CD in aqueous solutions [151], riboflavin with α-, β-, and γ-CD in aqueous solutions [152–158], diphenylhydramine with β-CD in aqueous solutions [159], isradipine with methyl β-CD [160], triprolidine HCl with β-CD [161], and other photosensitive drugs with different CDs [162].

8.5. Liposome Formation

Liposomes are microscopic and submicroscopic phospholipid vesicles with a bilayered membrane structure. Photostabilization of the drug substances by entrapment into liposomes is an effective method to improve their photostability. Examples of stabilization of the photosensitive drugs in liposomal formulations include riboflavin [163–167], doxorubicin [168], vitamin A palmitate [169], fluoroquinolones [170, 171], rose Bengal [172], amlodipine [173], tretinoin [174], 2,7-dichlorodihydrofluorescein [175], o-palmitoyl amylopectin [176], and zinc phthalocyanine and chloroaluminium phthalocyanine [177]. The entrapment efficiency of the liposomes facilitates the enhancement of the photostability of the drugs [164, 165, 174, 178]. Barnidipine in cyclodextrin-in-liposomes matrices has shown increased photostability with a value close to that of the solid formulations [174]. The photostability of drugs in liposomal formulations may be affected by the composition of the liposomes, the entrapment efficiency, and the drug-phospholipid interaction [179].

8.6. Use of Stabilizers

A careful consideration of the factors that promote the photodegradation of drugs and their control may improve photostability. Some factors that adversely affect the photostability of drugs include oxygen, oxidizing agents, and metal ions. Photooxidation of drugs is among the most commonly occurring modes of their degradation. Oxygen present in a formulation may be removed by purging with nitrogen or by the addition of a suitable antioxidant depending on the susceptibility of the drug to photooxidation. The selection of an antioxidant may be made on the basis of the difference in the redox potential between the drug and the oxidant. The effectiveness of an antioxidant is determined by studying the pharmaceutical system under standard oxidation conditions and assaying the drug content periodically [180]. The drug substances that may be significantly affected by the oxidation-reduction reactions leading to photodegradation include ascorbic acid, riboflavin, cyanocobalamin, menadione, α-tocopherol, and chlorpromazine [14]. Some of the commonly used antioxidants are ascorbic acid, α-tocopherol, butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), L-histidine, propyl gallate, and sulfur compounds. Ascorbic acid, α-tocopherol, β-carotene, and BHT act as free radical scavengers and singlet oxygen quenchers and thus inhibit the photosensitization reactions. If a drug substance acts as a photosensitizer and initiates a chain reaction in the drug product, some of the excipients may be oxidized, while the drug may be protected from photodegradation [38].

Examples of the photostabilization of drugs by the use of an antioxidant and other agents include ascorbic acid, stabilized by α-tocopherol [181], doxorubicin HCl by sodium thiosulphate [182], mitomycin and porfiromycin [183], sulfacetamide and sulphanilamide by sulfur compounds [184], vitamin A by propyl gallate, citric acid, and BHT [185], cholecalciferol by α-tocopherol and ascorbic acid [186], cianidanol by an oxygen adsorbent [187], and riboflavin by EDTA, thiourea, DL-methionine, and sodium thiosulfate [188].

8.7. Choice of Solvent

Solvents can exert considerable influence on the stability of the photosensitive drugs in the pharmaceutical formulations. The photodegradation rates may be affected by the polarity and viscosity of the medium. The choice of an appropriate solvent or a solvent combination may improve the photostability of a particular drug. In particular, the effect of the dielectric constant on the kinetics of the photodegradation of 10-methylisoalloxazine [62], formylmethylflavin [65], riboflavin [72, 189–193], moxifloxacin [194], and norfloxacin [195, 196] in aqueous and organic solvents has been studied. The reaction rates of these compounds are a linear function of the solvent dielectric constant. This may imply the involvement of a polar intermediate in the reaction pathway [62].

The photodegradation rate of a drug may also be influenced by the solvent viscosity. In the case of the above-mentioned flavins [62, 65, 192] and fluoroquinolones [193–195], the reaction rates are a reciprocal function of the solvent viscosity. Thus, an increase in the medium viscosity leads to a decrease in the reaction rate. This could result from the inhibition of the solute diffusion into the solvent [6]. For example, the photodegradation of cyanocobalamin (vitamin B₁₂) in aqueous solutions is suppressed by the addition of glycerol due to an increase in the medium viscosity [197]. These studies indicate that the solvent characteristics such as dielectric constant and viscosity should be given due consideration in the formulation of drugs to achieve photostabilization.

8.8. Choice of pH

The pH of a solution is an important factor in the stabilization of the drug substances. A drug may be more stable in its ionized or nonionized form and may undergo specific acid-base catalysis in aqueous solutions. However, it would depend on the reactivity of the excited state of the molecule in the particular pH range. The oxidation of many drugs is affected by pH; for example, ascorbic acid ( = 4.17) undergoes rapid photooxidation in the neutral and alkaline pH range and is stable in the acid pH range [197]. Several studies have been conducted to evaluate the effect of pH on the stability of the drug substances [14, 198] and to assess the optimum pH from the rate-pH relationships to achieve stabilization [14, 45, 194, 195, 199]. The buffer species present in a solution may be involved in the general acid-base catalysis [18] and should be carefully selected to avoid this effect.

9. Conclusions

The photostability evaluation and the photostability testing of the drugs and drug products are an important part of the formulation studies, providing information on their intrinsic photostability characteristics and enabling the development of stable, safe, and effective products. The knowledge of the photostability of drugs and their mode of degradation helps to guide the formulator in the assessment of the product and thus make modifications necessary to prolong its shelf life under the proposed storage conditions. The use of various photostabilization techniques may further enhance the stability of the products. The objective of these studies is to ensure product quality along with all of the necessary attributes during their storage and use.

Competing Interests

The authors declare that they have no competing interests.

Acknowledgments

The authors are very grateful to Professor Dr. S. Fazal Hussain of the Baqai Institute of Pharmaceutical Sciences for his kind help in the preparation of this paper. The study was partly supported by the research Grant DEC–2012/05/B/ST4/01207 to Marek Sikorski from the National Science Centre of Poland (NCN).

References

Her Majesty's Stationery Office, British Pharmacopoeia, Her Majesty's Stationery Office, London, UK, 2013.
United States Pharmacopeial Convention, United States Pharmacopeia 29, United States Pharmacopeial Convention, Rockville, Md, USA, 2012.
EDQM, European Pharmacopoeia, European Pharmacopoeial Convention and the European Union, Strasbourg, France, 8th edition, 2015.
W. H. Horspool and D. Armesto, Organic Photochemistry: a Comprehensive Treatment, Ellis Horwood, New York, NY, USA, 1992.
W. H. Horspool and F. Lensi, Eds., Handbook of Organic Photochemistry and Photobiology, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
N. J. Turro, V. Ramamurthy, and V. Scaiano, Modern Molecular Photochemistry of Organic Compounds, University Science Press, Sausalito, Calif, USA, 2010.
G. M. J. Beijersbergen van Henegouwen, “Medicinal photochemistry: phototoxic and phototherapeutic aspects of drugs,” Advances in Drug Research, vol. 29, pp. 79–170, 1997.
View at: Google Scholar
J. Moan, “Benefits and adverse effects from the combination of drugs and light,” in Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 173–188, Taylor & Francis, London, UK, 1996.
View at: Google Scholar
P. Kullavanijaya and H. W. Lim, “Photoprotection,” Journal of the American Academy of Dermatology, vol. 52, no. 6, pp. 937–958, 2005.
View at: Publisher Site | Google Scholar
A. Albini and E. Fasani, Drugs Photochemistry and Photostability, Royal Society of Chemistry, Cambridge, UK, 1998.
H. H. Tonnesen, Photostability of Drugs and Drug Formulations, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
J. T. Piechocki and K. Thoma, Eds., Pharmaceutical Photostability and Stabilization Technology, Informa Healthcare, New York, NY, USA, 2007.
G. M. J. Beijersbergen van Henegouwen, “Photochemistry of drugs in vitro and in vivo,” in Topics in Pharmaceutical Sciences, D. D. Breimer and D. Speiser, Eds., Elsevier, Amsterdam, The Netherlands, 1981.
View at: Google Scholar
K. A. Connors, G. L. Amidon, and V. J. Stella, Chemical Stability of Pharmaceuticals, John Wiley & Sons, New York, NY, USA, 3rd edition, 1986.
J. V. Greenhill and M. A. McLelland, “Photodecomposition of drugs,” in Progress in Medicinal Chemistry, G. P. Ellis and G. B. West, Eds., pp. 51–121, Elsevier, Amsterdam, The Netherlands, 1990.
View at: Google Scholar
J. T. Carstensen, “Catalysis, complexation and photolysis,” in Drug Stability, J. T. Carstensen and C. T. Rhodes, Eds., pp. 133–144, Marcel Dekker, New York, NY, USA, 3rd edition, 2000.
View at: Google Scholar
B. R. Mathews, “Regulatory aspects of stability testing in Europe,” in Drug Stability, J. T. Carstensen and C. T. Rhodes, Eds., pp. 579–618, Marcel Dekker, New York, NY, USA, 3rd edition, 2000.
View at: Google Scholar
S. Yoshioka and V. J. Stella, Stability of Drugs and Dosage Forms, Kluwer Academic, New York, NY, USA, 2000.
H. H. Tonnesen, “Photodecomposition of drugs,” in Encyclopedia of Pharmaceutical Technology, J. Swarbrick and J. C. Boylan, Eds., vol. 3, pp. 2197–2203, Marcel Dekker, New York, NY, USA, 2nd edition, 2002.
View at: Google Scholar
E. Fasani and A. Albini, “Photostability stress testing,” in Pharmaceutical Stress Testing: Predicting Drug Degradation, S. W. Baertschi, Ed., pp. 293–325, Taylor & Francis, New York, NY, USA, 2005.
View at: Google Scholar
I. Ahmad and F. H. M. Vaid, “Photochemistry of flavins in aqueous and organic solvents,” in Flavin Photochemistry and Photobiology, E. Silva and A. M. Edwards, Eds., pp. 12–40, The Royal Society of Chemistry, Cambridge, UK, 2006.
View at: Google Scholar
E. Silva and M. Edwards, Flavins Photochemistry and Photobiology, The Royal Society of Chemistry, Cambridge, UK, 2006.
T. Loftsson, Drug Stability for Pharmaceutical Scientists, Academic Press, New York, NY, USA, 2014.
J. K. Sugden, “Photostability of cosmetic material,” International Journal of Cosmetic Science, vol. 7, no. 4, pp. 165–173, 1985.
View at: Publisher Site | Google Scholar
H. H. Tønnesen, “Formulation and stability testing of photolabile drugs,” International Journal of Pharmaceutics, vol. 225, no. 1-2, pp. 1–14, 2001.
View at: Publisher Site | Google Scholar
S. Singh and M. Bakshi, “Guidance on conduct of stress tests to determine inherent stability of drugs,” Pharmaceutical Technology, vol. 3, pp. 1–14, 2000.
View at: Google Scholar
N. R. Bhalekar, D. Harinarayana, A. R. Madgulkar, S. J. Pandya, and D. K. Jain, “Improvement of photostability in formulation: a review,” Asian Journal of Chemistry, vol. 20, no. 7, pp. 5095–5108, 2008.
View at: Google Scholar
A. C. Templeton, H. Xu, J. Placek, and R. A. Reed, “Implications of photostability on the manufacturing, packaging, storage and testing of formulated pharmaceutical products,” Pharmaceutical Technology, vol. 3, pp. 68–86, 2005.
View at: Google Scholar
M. A. Sheraz, S. H. Kazi, S. Ahmed, Z. Anwar, and I. Ahmad, “Photo, thermal and chemical degradation of riboflavin,” Beilstein Journal of Organic Chemistry, vol. 10, pp. 1999–2012, 2014.
View at: Publisher Site | Google Scholar
C. J. Lintner, “Pharmaceutical product stability,” in Quality Control in the Pharmaceutical Industry, M. S. Cooper, Ed., vol. 2, pp. 141–238, Academic Press, New York, NY, USA, 1973.
View at: Google Scholar
C. Dollery, Ed., Therapeutics Drugs, Churchill Livingston, London, UK, 2nd edition, 1999.
A. Benrath, “On pure and combined photochemical reactions,” Zeitchrift Physikalische Chemie, vol. 74, pp. 115–124, 1910.
View at: Google Scholar
A. Albini and M. Fagnoni, “Green chemistry and photochemistry were born at the same time,” Green Chemistry, vol. 6, no. 1, pp. 1–4, 2004.
View at: Publisher Site | Google Scholar
D. Ravelli, S. Protti, and A. Albini, “Energy and molecules from photochemical/photocatalytic reactions. An overview,” Molecules, vol. 20, no. 1, pp. 1527–1542, 2015.
View at: Publisher Site | Google Scholar
J. G. Calvert and N. J. Pitts Jr., Photochemistry, John Wiley & Sons, New York, NY, USA, 1966.
A. Gilbert and J. Baggott, Essentials of Molecular Photochemistry, Blackwell Scientific Publishers, London, UK, 1991.
M. Klessinger and J. Michl, Excited States and Photochemistry of Organic Molecules, Wiley-VCH, New York, NY, USA, 2006.
D. E. Moore, “Photophysical and photochemical aspects of drug stability,” in Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 17–19, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
View at: Google Scholar
S. Navaratnum, “Photochemical and photophysical methods used in the study of drug photoreactivity,” in The Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 255–284, Taylor & Francis, London, UK, 2nd edition, 2004.
View at: Google Scholar
D. E. Moore, “Standardization of kinetic studies of photodegradation reactions,” in Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 53–55, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
View at: Google Scholar
G. M. J. Beijersbergen van Hanegowen, “Medicinal photochemistry (an introduction with attention to kinetic aspects),” in Drug Photochemistry and Photobiology, A. Albini and E. Fasani, Eds., pp. 74–86, The Royal Society of Chemistry, Cambridge, UK, 1998.
View at: Google Scholar
M. Schuman Jorns, G. Schoellnhammer, and P. Hemmerich, “Intramolecular addition of the riboflavin side chain. Anion catalyzed neutral photochemistry,” European Journal of Biochemistry, vol. 57, no. 1, pp. 35–48, 1975.
View at: Publisher Site | Google Scholar
I. Ahmad, Q. Fasihullah, and F. H. M. Vaid, “A study of simultaneous photolysis and photoaddition reactions of riboflavin in aqueous solution,” Journal of Photochemistry and Photobiology B: Biology, vol. 75, no. 1-2, pp. 13–20, 2004.
View at: Publisher Site | Google Scholar
J. M. Pratt, “The chemistry of vitamin B₁₂. Part II. Photochemical reactions,” Journal of the Chemical Society, pp. 5154–5160, 1964.
View at: Google Scholar
I. Ahmad, W. Hussain, and A. A. Fareedi, “Photolysis of cyanocobalamin in aqueous solution,” Journal of Pharmaceutical and Biomedical Analysis, vol. 10, no. 1, pp. 9–15, 1992.
View at: Publisher Site | Google Scholar
I. A. Ansari, Photolysis and interactions of cyanocobalamin with some B-vitamins and ascorbic acid in parenteral solutions [Ph.D. thesis], University of Karachi, Karachi, Pakistan, 2001.
J. A. Hill, J. M. Pratt, and R. J. P. Williams, “The corphyrins,” Journal of Theoretical Biology, vol. 3, no. 3, pp. 423–445, 1962.
View at: Publisher Site | Google Scholar
J. Philip and D. H. Szulczewski, “Photolytic decomposition of N-(2,6-dichloro-m-tolyl) anthranilic acid (meclofenamic acid),” Journal of Pharmaceutical Sciences, vol. 8, no. 9, pp. 1479–1482, 1973.
View at: Google Scholar
K. Nord, J. Karlsen, and H. H. Tønnesen, “Photochemical stability of biologically active compounds. IV. Photochemical degradation of chloroquine,” International Journal of Pharmaceutics, vol. 72, no. 1, pp. 11–18, 1991.
View at: Publisher Site | Google Scholar
E. Choe, R. Huang, and D. B. Min, “Chemical reactions and stability of riboflavin in foods,” Journal of Food Science, vol. 70, no. 1, pp. R28–R36, 2005.
View at: Publisher Site | Google Scholar
A. Albini and S. Monti, “Photophysics and photochemistry of fluoroquinolones,” Chemical Society Reviews, vol. 32, no. 4, pp. 238–250, 2003.
View at: Publisher Site | Google Scholar
E. Fasani, F. F. Barberis Negra, M. Mella, S. Monti, and A. Albini, “Photoinduced C-F bond cleavage in some fluorinated 7-amino-4-quinolone- 3-carboxylic acids,” Journal of Organic Chemistry, vol. 64, no. 15, pp. 5388–5395, 1999.
View at: Publisher Site | Google Scholar
I. A. Majeed, W. J. Murray, D. W. Newton, S. Othman, and W. A. Al-turk, “Spectrophotometric study of the photodecomposition kinetics of nifedipine,” Journal of Pharmacy and Pharmacology, vol. 39, no. 12, pp. 1044–1046, 1987.
View at: Publisher Site | Google Scholar
G. S. Sadana and A. B. Ghogare, “Mechanistic studies on photolytic degradation of nifedipine by use of ¹H–NMR and ¹³C–NMR spectroscopy,” International Journal of Pharmaceutics, vol. 70, no. 1-2, pp. 195–199, 1991.
View at: Publisher Site | Google Scholar
S. Kristensen, A.-L. Grislingaas, J. V. Greenhill, T. Skjetne, J. Karlsen, and H. H. Tønnesen, “Photochemical stability of biologically active compounds: V. Photochemical degradation of primaquine in an aqueous medium,” International Journal of Pharmaceutics, vol. 100, no. 1–3, pp. 15–23, 1993.
View at: Publisher Site | Google Scholar
H. H. Tņnesen and D. E. Moore, “Photochemical stability of biologically active compounds. III. Mefloquine as a photosensitizer,” International Journal of Pharmaceutics, vol. 70, no. 1-2, pp. 95–101, 1991.
View at: Publisher Site | Google Scholar
T. Ahmad and I. Ahmed, “Degradation studies on sulphacetamide eye-drops. Part 1,” Die Pharmazie, vol. 36, no. 9, pp. 619–621, 1981.
View at: Google Scholar
H. Fabre, H. Ibork, and D. A. Lerner, “Photodegradation kinetics under UV light of aztreonam solutions,” Journal of Pharmaceutical and Biomedical Analysis, vol. 10, no. 9, pp. 645–650, 1992.
View at: Publisher Site | Google Scholar
D. E. Moore, “Antioxidant efficiency of polyhydric phenols in photooxidation of benzaldehyde,” Journal of Pharmaceutical Sciences, vol. 65, no. 10, pp. 1447–1451, 1976.
View at: Publisher Site | Google Scholar
J. C. Vire, G. J. Patriarche, and G. D. Christian, “Electrochemical study of the degradation of vitamins of the K group,” Pharmazie, vol. 35, pp. 209–212, 1980.
View at: Google Scholar
F. Vargas, C. Rivas, R. Machado, and Z. Sarabia, “Photodegradation of benzydamine: phototoxicity of an isolated photoproduct on erythrocytes,” Journal of Pharmaceutical Sciences, vol. 82, no. 4, pp. 371–372, 1993.
View at: Publisher Site | Google Scholar
I. Ahmad and G. Tollin, “Solvent effect on flavin electron transfer reactions,” Biochemistry, vol. 20, no. 20, pp. 5925–5928, 1981.
View at: Publisher Site | Google Scholar
I. Ahmad and H. D. C. Rapson, “Multicomponent spectrophotometric assay of riboflavine and photoproducts,” Journal of Pharmaceutical and Biomedical Analysis, vol. 8, no. 3, pp. 217–223, 1990.
View at: Publisher Site | Google Scholar
P. F. Heelis, G. O. Phillips, I. Ahmad et al., “The photodegradation of formylmethylflavin: a steady state and laser flash photolysis study,” Photobiochemistry and Photobiophysics, vol. 1, no. 2, pp. 125–130, 1980.
View at: Google Scholar
W. E. Kurtin, M. A. Latino, and P. S. Song, “A study of photochemistry of flavins in pyridine and with a donor,” Photochemistry and Photobiology, vol. 6, no. 4, pp. 247–259, 1967.
View at: Publisher Site | Google Scholar
W. M. Moore, J. T. Spence, F. A. Raymond, and S. D. Colson, “Photochemistry of riboflavin. I. The hydrogen transfer process in the anaerobic photobleaching of flavins,” Journal of the American Chemical Society, vol. 85, no. 21, pp. 3367–3372, 1963.
View at: Publisher Site | Google Scholar
M. Green and G. Tollin, “Flash photolysis of flavins. I. Photoreduction in non-aqueous solvents,” Photochemistry and Photobiology, vol. 7, no. 2, pp. 129–143, 1968.
View at: Publisher Site | Google Scholar
G. R. Penzer and G. K. Radda, “Photochemistry of flavins,” Methods in Enzymology B, vol. 18, pp. 479–495, 1971.
View at: Publisher Site | Google Scholar
W. L. Cairns and D. E. Metzler, “Photochemical degradation of flavins. VI. A new photoproduct and its use in studying the photolytic mechanism,” Journal of the American Chemical Society, vol. 93, no. 11, pp. 2772–2777, 1971.
View at: Publisher Site | Google Scholar
P. F. Heelis, “The photophysical and photochemical properties of flavins (isoalloxazines),” Chemical Society Reviews, vol. 11, no. 1, pp. 15–39, 1982.
View at: Publisher Site | Google Scholar
P. F. Heelis, “The photochemistry of flavins,” in Chemistry and Biochemistry of Flavoenzymes, F. Muller, Ed., pp. 171–193, CRC Press, Boca Raton, Fla, USA, 1991.
View at: Google Scholar
W. Holzer, J. Shirdel, P. Zirak et al., “Photo-induced degradation of some flavins in aqueous solution,” Chemical Physics, vol. 308, no. 1-2, pp. 69–78, 2005.
View at: Publisher Site | Google Scholar
M. Insińska-Rak, A. Golczak, and M. Sikorski, “Photochemistry of riboflavin derivatives in methanolic solutions,” The Journal of Physical Chemistry A, vol. 116, no. 4, pp. 1199–1207, 2012.
View at: Publisher Site | Google Scholar
M. Insińska-Rak and M. Sikorski, “Riboflavin interactions with oxygen-survey from the photochemical perspective,” Chemistry, vol. 20, no. 47, pp. 15280–15291, 2014.
View at: Publisher Site | Google Scholar
R. Brdička, “Decomposition of lactoflavin by light,” Collection of Czechoslovak Chemical Communications, vol. 14, pp. 130–144, 1949.
View at: Publisher Site | Google Scholar
E. C. Smith and D. E. Metzler, “The photochemical degradation of riboflavin,” Journal of the American Chemical Society, vol. 85, no. 20, pp. 3285–3288, 1963.
View at: Publisher Site | Google Scholar
P. S. Song, E. C. Smith, and D. E. Metzler, “Photochemical degradation of flavins. II. The mechanism of alkaline hydrolysis of 6,7-dimethyl-9-formyl-methylisoalloxazine,” Journal of American Chemical Society, vol. 87, no. 18, pp. 4181–4184, 1965.
View at: Google Scholar
I. Ahmad, H. D. C. Rapson, P. P. Heelis, and G. O. Phillips, “Alkaline hydrolysis of 7,8-dimethyl-10-(formylmethyl)isoalloxazine. A kinetic study,” Journal of Organic Chemistry, vol. 45, no. 4, pp. 731–733, 1980.
View at: Publisher Site | Google Scholar
I. Ahmad, T. Mirza, K. Iqbal, S. Ahmed, M. A. Sheraz, and F. H. M. Vaid, “Effect of pH, buffer, and viscosity on the photolysis of formylmethylflavin: a kinetic study,” Australian Journal of Chemistry, vol. 66, no. 5, pp. 579–585, 2013.
View at: Publisher Site | Google Scholar
C. Fukumachi and Y. Sakurai, “Vitamin B₂ photolysis. V. The photolytic formation of 6,7-dimethyl-9-acetic ester from riboflavin,” Vitamin (Kyoto), vol. 7, pp. 939–943, 1954.
View at: Google Scholar
I. Ahmad, Q. Fasihullah, A. Noor, I. A. Ansari, and Q. N. M. Ali, “Photolysis of riboflavin in aqueous solution: a kinetic study,” International Journal of Pharmaceutics, vol. 280, no. 1-2, pp. 199–208, 2004.
View at: Publisher Site | Google Scholar
F. Urbach, Ed., The Biological Effects of Ultraviolet Radiations, Pergamon, Oxford, UK, 1969.
J. H. Epstein and B. U. Wintroub, “Photosensitivity due to drugs,” Drugs, vol. 30, no. 1, pp. 42–57, 1985.
View at: Publisher Site | Google Scholar
L. C. Harber, I. E. Kochevar, and A. R. Shalita, “Mechanism of photosensitization to drugs in humans,” in Science of Photomedicine, J. D. Regan and J. A. Parrish, Eds., pp. 323–347, Plenum Press, New York, NY, USA, 1982.
View at: Google Scholar
D. Moyal and A. Fourtanier, “Acute and chronic effects of UV on skin,” in Photoaging, D. S. Rigel, R. A. Weiss, H. W. Lim, and J. S. Dover, Eds., pp. 15–32, Marcel Dekker, New York, NY, USA, 2004.
View at: Google Scholar
J. E. Roberts, “Screening dyes, drugs and dietary supplements for ocular phototoxicity,” in Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 235–254, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
View at: Google Scholar
H. V. DeBuys, S. B. Levy, J. C. Murray, D. L. Madey, and S. R. Pinnell, “Modern approaches to photoprotection,” Dermatologic Clinics, vol. 18, no. 4, pp. 577–590, 2000.
View at: Publisher Site | Google Scholar
R. C. Romanhole, J. A. Ataide, P. Moriel, and P. G. Mazzola, “Update on ultraviolet A and B radiation generated by the sun and artificial lamps and their effects on skin,” International Journal of Cosmetic Science, vol. 37, no. 4, pp. 366–370, 2015.
View at: Publisher Site | Google Scholar
E. M. Gil and T. H. Kim, “UV-induced immune suppression and sunscreen,” Photodermatology Photoimmunology and Photomedicine, vol. 16, no. 3, pp. 101–110, 2000.
View at: Publisher Site | Google Scholar
R. Roelandts, “Shedding light on sunscreens,” Clinical and Experimental Dermatology, vol. 23, no. 4, pp. 147–157, 1998.
View at: Publisher Site | Google Scholar
F. P. Gasparro, M. Mitchnick, and J. F. Nash, “A review of sunscreen safety and efficacy,” Photochemistry and Photobiology, vol. 68, no. 3, pp. 243–256, 1998.
View at: Publisher Site | Google Scholar
E. Chatelain and B. Gabard, “Photostabilization of butyl methoxydibenzoylmethane (Avobenzone) and ethylhexyl methoxycinnamate by bis-ethylhexyloxyphenol methoxyphenyl triazine (Tinosorb S), a new UV broadband filter,” Photochemistry and Photobiology, vol. 74, no. 3, pp. 401–406, 2001.
View at: Publisher Site | Google Scholar
H. Maier, G. Schauberger, K. Brunnhofer, and H. Hönigsmann, “Change of ultraviolet absorbance of sunscreens by exposure to solar-simulated radiation,” The Journal of Investigative Dermatology, vol. 117, no. 2, pp. 256–262, 2001.
View at: Publisher Site | Google Scholar
D. A. Buckley, D. O'Sullivan, and G. M. Murphy, “Contact and photocontact allergy to dibenzoylmethanes and contact allergy to methylbenzylidene camphor,” Contact Dermatitis, vol. 29, no. 1, p. 47, 1993.
View at: Publisher Site | Google Scholar
M. F. Naylor and K. C. Farmer, “The case for sunscreens: a review of their use in preventing actinic damage and neoplasia,” Archives of Dermatology, vol. 133, no. 9, pp. 1146–1154, 1997.
View at: Publisher Site | Google Scholar
S. Schauder and H. Ippen, “Photoallergic and allergic contact dermatitis from dibenzoylmethanes,” Photodermatology, vol. 3, no. 3, pp. 140–147, 1986.
View at: Google Scholar
S. Schauder and H. Ippen, “Contact and photocontact sensitivity to sunscreens. Review of a 15-year experience and of the literature,” Contact Dermatitis, vol. 37, no. 5, pp. 221–232, 1997.
View at: Publisher Site | Google Scholar
R. J. Motley and A. J. Reynolds, “Photocontact dermatitis due to isopropyl and butyl methoxy dibenzoylmethanes (Eusolex 8020 and Parsol 1789),” Contact Dermatitis, vol. 21, no. 2, pp. 109–110, 1989.
View at: Publisher Site | Google Scholar
E. J. Parry, D. Bilsland, and W. N. Morley, “Photocontact allergy to 4-tert-butyl-4′-methoxy-dibenzoylmethane (Parsol 1789),” Contact Dermatitis, vol. 32, no. 4, pp. 251–252, 1995.
View at: Google Scholar
T. Schmidt, J. Ring, and D. Abeck, “Photoallergic contact dermatitis due to combined UVB (4-methylbenzylidene camphor/octyl methoxycinnamate) and UVA (benzophenone-3/butyl methoxydibenzoylmethane) absorber sensitization,” Dermatology, vol. 196, no. 3, pp. 354–357, 1998.
View at: Publisher Site | Google Scholar
Food and Drug Administration USA, “Rules and regulations,” Federal Register, vol. 64, no. 98, p. 27687, 1999.
View at: Google Scholar
R. Jansen, U. Osterwalder, S. Q. Wang, M. Burnett, and H. W. Lim, “Photoprotection: part II. Sunscreen: development, efficacy, and controversies,” Journal of the American Academy of Dermatology, vol. 69, no. 6, pp. 867.e1–867.e14, 2013.
View at: Publisher Site | Google Scholar
ICH, “Harmonized tripartite guideline: photostability testing of new drug substances and products, ICH-Q113, Nov. 1996,” Federal Register, vol. 62, pp. 27115–27122, 1996.
View at: Google Scholar
S. C. Valvani, “Industrial stability testing in the United States and computerization of stability data,” in Drug Stability Principles and Practices, J. T. Carstensen and C. T. Rhodes, Eds., pp. 515–552, Marcel Dekker, New York, NY, USA, 3rd edition, 2000.
View at: Google Scholar
N. H. Anderson, D. Johnston, M. A. McLelland, and P. Munden, “Photostability testing of drug substances and drug products in UK pharmaceutical laboratories,” Journal of Pharmaceutical and Biomedical Analysis, vol. 9, no. 6, pp. 443–449, 1991.
View at: Publisher Site | Google Scholar
J. P. Riehl, C. L. Maupin, and T. P. Layloff, “On the choice of a light source for the photostability testing of pharmaceuticals,” Pharmacopoeial Forum, vol. 21, no. 6, pp. 1654–1663, 1995.
View at: Google Scholar
M. Matsuo, Y. Machida, H. Furuichi, K. Nakamura, and Y. Takeda, “Suitability of photon sources for photostability testing of pharmaceutical products,” Drug Stability, vol. 1, no. 3, pp. 179–187, 1996.
View at: Google Scholar
H. H. Tonnesen and J. Karlsen, “Photochemical degradation of components in drug formulations. A discussion of experimental conditions,” PharmaEuropa, vol. 7, pp. 137–141, 1995.
View at: Google Scholar
J. J. Piechocki, “Selecting the right source for photostability testing,” in Drugs Photochemistry and Photostability, A. Albini and E. Fasani, Eds., pp. 247–271, The Royal Society of Chemistry, Cambridge, UK, 1998.
View at: Google Scholar
H. H. Anderson and S. J. Byard, “Photostability testing: design and interpretation of tests on new drug substance and dosage forms,” in Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 137–160, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
View at: Google Scholar
J. Boxhammer and A. Schonlein, “Technical requirements and equipment for photostability testing,” in Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 111–136, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2004.
View at: Google Scholar
J. Boxhammer and C. Willwoldt, “Design and validation characteristics of environmental chambers for photostability testing,” in Drugs Photochemistry and Photostability, A. Albini and E. Fasani, Eds., pp. 272–287, The Royal Society of Chemistry, Cambridge, UK, 1998.
View at: Google Scholar
J. B. Davis, “Qualification, calibration and maintenance of stability chambers,” in Handbook of Stability-Testing in Pharmaceutical Development: Regulations Methodologies and Best Practices, K. Huynh-Ba, Ed., pp. 285–302, Springer, New York, NY, USA, 2009.
View at: Google Scholar
D. E. Moore, “Principles and practice of drug photodegradation studies,” Journal of Pharmaceutical and Biomedical Analysis, vol. 5, no. 5, pp. 441–453, 1987.
View at: Publisher Site | Google Scholar
H. D. Drew, “Photostability of drug substances and drug products: a validated reference method for implementing ICH photostability study guidelines,” in Drugs Photochemistry and Photostability, A. Albini and E. Fasani, Eds., pp. 227–242, The Royal Society of Chemistry, Cambridge, UK, 1998.
View at: Google Scholar
W. Grimm, “A rational approach to stability testing and analytical development for NCE, drug substance and stability testing,” in Drug Stability Principles and Practices, J. T. Carstensen and C. T. Rhodes, Eds., pp. 415–482, Marcel Dekker, New York, NY, USA, 3rd edition, 2000.
View at: Google Scholar
W. Grimm, G. Harnischfeger, and M. Tegtmeier, Stabilitatsprufung in der Pharmazie, Thieme, Stuttgart, Germany, 3rd edition, 2011.
S. Nema, R. J. Washkuhn, and D. R. Beussink, “Photostability testing: an overview,” Pharmaceutical Technology, vol. 19, pp. 170–185, 1995.
View at: Google Scholar
P. Halboe, “The elaboration and application of the ICH guideline on photostability: a European view,” in Drugs Photochemistry and Photobiology, A. Albini and E. Fasani, Eds., pp. 243–246, The Royal Society of Chemistry, Cambridge, UK, 1998.
View at: Google Scholar
T. G. Beaumont, “Photostability testing,” in International Stability Testing, D. J. Mazzo, Ed., pp. 59–72, Interpharm Press, Buffalo Grove, Ill, USA, 1999.
View at: Google Scholar
F. Sequeira and C. Vozone, “Photostability studies of drug substances and products: practical implications of the ICH guideline,” Pharmaceutical Technology, vol. 24, no. 8, pp. 30–35, 2000.
View at: Google Scholar
S. R. Thatcher, R. K. Mausfield, R. B. Miller et al., “Pharmaceutical photostability a technical guide and practical interpretation of the ICH guideline and its application to pharmaceutical stability. I,” Pharmaceutical Technology, vol. 25, no. 3, pp. 50–52, 2001.
View at: Google Scholar
S. R. Thatcher, R. K. Mansfield, R. B. Miller, C. W. Davis, and S. W. Baertschi, “Pharmaceutical photostability: a technical guide and practical interpretation of the ICH guideline and its application to pharmaceutical stability. II,” Pharmaceutical Technology, vol. 25, no. 4, pp. 50–62, 2001.
View at: Google Scholar
K. Thoma, “Photodecomposition and stabilization of compounds in dosage forms,” in The Photostability of Drugs and Drug Formulations, H. H. Tonnesen, Ed., pp. 111–140, Taylor & Francis, London, UK, 1996.
View at: Google Scholar
K. A. Connors, G. L. Amidon, and V. J. Stella, “Solid-state chemical decomposition,” in Chemical Stability of Pharmaceuticals, K. A. Connors, G. L. Amidon, and V. J. Stella, Eds., pp. 115–132, John Wiley & Sons, New York, NY, USA, 3rd edition, 1986.
View at: Google Scholar
K. Thoma and R. Klimek, “Photostabilization of drugs in dosage forms without protection from packaging materials,” International Journal of Pharmaceutics, vol. 67, no. 2, pp. 169–175, 1991.
View at: Publisher Site | Google Scholar
K. Thoma and H. Spilgies, “Photostabilization of solid and semisolid dosage forms,” in Pharmaceutical Photostability and Stabilization, J. T. Piechocka and K. Thoma, Eds., pp. 323–334, Informa Healthcare, New York, NY, USA, 2007.
View at: Google Scholar
K. Thoma and N. Kubler, “Einflub vis hilfostffen aus die photozersetzing von arzeistoffen,” Die Pharmazie, vol. 52, no. 2, pp. 122–129, 1997.
View at: Google Scholar
K. Thoma, “Protection of drugs against light achieved protection and possibilities of stabilization,” in Proceedings of the 3rd International Meeting on Photostability of Drugs (Photostability '99), Washington, DC, USA, July 1999.
View at: Google Scholar
E. E. Kaminsk, R. M. Cohn, J. L. McGure, and J. T. Carstensen, “Light stability of norethindrone and ethinyl estradiol formulated with FD&C colorants,” Journal of Pharmaceutical Sciences, vol. 68, no. 3, pp. 368–370, 1979.
View at: Publisher Site | Google Scholar
H. Takeuchi, H. Sasaki, T. Niwa et al., “Improvement of photostability of ubidecarenone in the formulation of a novel powdered dosage form termed redispersible dry emulsion,” International Journal of Pharmaceutics, vol. 86, no. 1, pp. 25–33, 1992.
View at: Publisher Site | Google Scholar
D. S. Desai, M. A. Abdelnasser, B. A. Rubitski, and S. A. Varia, “Photostabilization of uncoated tablets of sorivudine and nifedipine by incorporation of synthetic iron oxides,” International Journal of Pharmaceutics, vol. 103, no. 1, pp. 69–76, 1994.
View at: Publisher Site | Google Scholar
Y. Matsuda, T. Itooka, and Y. Mitsuhashi, “Photostability of indomethacin in model gelatin capsules: effects of film thickness and concentration of titanium dioxide on the coloration and photolytic degradation,” Chemical and Pharmaceutical Bulletin, vol. 28, no. 9, pp. 2665–2671, 1980.
View at: Publisher Site | Google Scholar
R. Teraoka, Y. Matsuda, and I. Sugimoto, “Quantitative design for photostabilization of nifedipine by using titanium dioxide and/or tartrazine as colourants in model film coating systems,” The Journal of Pharmacy and Pharmacology, vol. 41, no. 5, pp. 293–297, 1989.
View at: Publisher Site | Google Scholar
S. R. Béchard, O. Quraishi, and E. Kwong, “Film coating: effect of titanium dioxide concentration and film thickness on the photostability of nife dipine,” International Journal of Pharmaceutics, vol. 87, no. 1–3, pp. 133–139, 1992.
View at: Publisher Site | Google Scholar
K. Thoma and R. Kerker, “Photounstabilitat von arzneimitteln 3. Mitteilung photoinstabilitat und stabilisierung von nifedipine in arzneiformin,” Pharmazeutische Industrie, vol. 54, no. 4, pp. 359–365, 1992.
View at: Google Scholar
Y. Matsuda, H. Inouye, and R. Nakanishi, “Stabilization of sulfisomidine tablets by use of film coating containing UV absorber: protection of coloration and photolytic degradation from exaggerated light,” Journal of Pharmaceutical Sciences, vol. 67, no. 2, pp. 196–201, 1978.
View at: Publisher Site | Google Scholar
A. Mukharya, P. U. Patel, and S. Chaudhary, “Effect assessment of ‘film coating and packaging’ on the photo-stability of highly photo-labile antihypertensive products,” International Journal of Pharmaceutical Investigation, vol. 3, no. 2, pp. 77–87, 2013.
View at: Publisher Site | Google Scholar
H. Nyqvist, M. Nicklasson, and P. Lundgren, “Studies on the physical properties of tablets and tablet excipients. V. Film coating for protection of a light-sensitive tablet-formulation,” Acta Pharmaceutica Suecica, vol. 19, no. 3, pp. 223–228, 1982.
View at: Google Scholar
I. Ahmad, S. Ahmed, M. A. Sheraz, M. Aminuddin, and F. H. M. Vaid, “Effect of caffeine complexation on the photolysis of riboflavin in aqueous solution: a kinetic study,” Chemical and Pharmaceutical Bulletin, vol. 57, no. 12, pp. 1363–1370, 2009.
View at: Publisher Site | Google Scholar
G. R. Penzer and G. K. Radda, “The chemistry and biological function of isoalloxazines (flavines),” Quarterly Reviews, Chemical Society, vol. 21, no. 1, pp. 43–65, 1967.
View at: Publisher Site | Google Scholar
E. DeRitter, “Vitamins in pharmaceutical formulations,” Journal of Pharmaceutical Sciences, vol. 71, no. 10, pp. 1073–1096, 1982.
View at: Publisher Site | Google Scholar
M. P. Evstigneev, A. O. Rozvadovskaya, A. A. H. Santiago et al., “A ¹H NMR study of the association of caffeine with flavin mononucleotide in aqueous solutions,” Russian Journal of Physical Chemistry A, vol. 79, no. 4, pp. 573–578, 2005.
View at: Google Scholar
R. S. Rivlin, “Riboflavin (vitamin B₂),” in Handbook of Vitamins, J. Zempleni, R. B. Rucker, D. B. McCormick, and J. W. Suttie, Eds., p. 240, CRC Press, New York, NY, USA, 4th edition, 2007.
View at: Google Scholar
D. A. Wadke and D. E. Guttman, “Complex formation influence on reaction rate. II. Hydrolytic behavior of riboflavin in borate buffer,” Journal of Pharmaceutical Sciences, vol. 53, pp. 1073–1076, 1964.
View at: Publisher Site | Google Scholar
I. Ahmad, S. Ahmed, M. A. Sheraz, and F. H. M. Vaid, “Effect of borate buffer on the photolysis of riboflavin in aqueous solution,” Journal of Photochemistry and Photobiology B: Biology, vol. 93, no. 2, pp. 82–87, 2008.
View at: Publisher Site | Google Scholar
K. Uekama, K. Oh, M. Otagiri et al., “Improvement of some pharmaceutical properties of colfibrate by cyclodextrin complexation,” Pharmaceutica Acta Helvetica, vol. 58, no. 12, pp. 338–342, 1983.
View at: Google Scholar
K. Tomono, H. Gotoh, M. Okamura et al., “Effect of β-cyclodextrin and its derivatives on the photostability of photosensitive drugs,” Yakuzaigaku, vol. 48, no. 4, pp. 322–325, 1988.
View at: Google Scholar
M. E. Brewster, T. Loftsson, K. S. Estes, J.-L. Lin, H. Fridriksdóttir, and N. Bodor, “Effect of various cyclodextrins on solution stability and dissolution rate of doxorubicin hydrochloride,” International Journal of Pharmaceutics, vol. 79, no. 1–3, pp. 289–299, 1992.
View at: Publisher Site | Google Scholar
A. Suenaga, O. Bekers, J. H. Beijnen et al., “Stabilization of daunorubicin and 4-demethoxydaunorubicin on complexation with octakis(2,6-di-O-methyl)-γ-cyclodextrin in acidic aqueous solution,” International Journal of Pharmaceutics, vol. 82, no. 1-2, pp. 29–37, 1992.
View at: Publisher Site | Google Scholar
O. A. G. J. van der Houwen, J. Teeuwsen, O. Bekers, J. H. Beijnen, A. Bult, and W. J. M. Underberg, “Degradation kinetics of 7-N-(p-hydroxyphenyl)mitomycin C (M-83) in aqueous solution in the presence of γ-cyclodextrin,” International Journal of Pharmaceutics, vol. 105, no. 3, pp. 249–254, 1994.
View at: Publisher Site | Google Scholar
Y. L. Loukas, “A Plackett-Burnam screening design directs the efficient formulation of multicomponent DRV liposomes,” Journal of Pharmaceutical and Biomedical Analysis, vol. 26, no. 2, pp. 255–263, 2001.
View at: Publisher Site | Google Scholar
Y. L. Loukas, V. Vraka, and G. Gregoriadis, “Fluorimetric studies of the formation of riboflavin-β-cyclodextrin inclusion complex: determination of the stability constant by use of a non-linear least-squares model,” Journal of Pharmacy and Pharmacology, vol. 49, no. 2, pp. 127–130, 1997.
View at: Publisher Site | Google Scholar
X.-M. Wang and H.-Y. Chen, “A spectroelectrochemical study of the interaction of riboflavin with β-cyclodextrin,” Spectrochimica Acta-Part A Molecular Spectroscopy, vol. 52, no. 5, pp. 599–605, 1996.
View at: Publisher Site | Google Scholar
X.-M. Wang, M.-D. Yan, J.-J. Zhu, and H.-Y. Chen, “The surface-enhanced Raman spectroelectrochemical study on the interaction between β-cyclodextrin and the electrochemically generated radical intermediate of flavin,” Journal of Electroanalytical Chemistry, vol. 451, no. 1-2, pp. 187–192, 1998.
View at: Publisher Site | Google Scholar
I. V. Terekhova, M. Kózbiał, R. S. Kumeev, and G. A. Alper, “Inclusion complex formation between modified cyclodextrins and riboflvin and alloxazine in aqueous solution,” Journal of Solution Chemistry, vol. 40, no. 8, pp. 1435–1446, 2011.
View at: Publisher Site | Google Scholar
I. V. Terekhova, M. N. Tikhova, T. V. Volkova, R. S. Kumeev, and G. L. Perlovich, “Inclusion complex formation of α- and β-cyclodextrins with riboflavin and alloxazine in aqueous solution: thermodynamic study,” Journal of Inclusion Phenomena and Macrocyclic Chemistry, vol. 69, no. 1-2, pp. 167–172, 2011.
View at: Publisher Site | Google Scholar
I. V. Terekhova, “Complexation of cyclodextrins with flavines in aqueous solutions,” Russian Journal of Physical Chemistry A, vol. 88, no. 1, pp. 65–72, 2014.
View at: Publisher Site | Google Scholar
B. D. Glass, M. E. Brown, S. Daya et al., “Influence of cyclodextrins on the photostability of selected drug molecules in solution and the solid-state,” International Journal of Photoenergy, vol. 3, no. 4, pp. 205–211, 2001.
View at: Publisher Site | Google Scholar
J. Mielcarek and E. Daczkowska, “Photodegradation of inclusion complexes of isradipine with methyl–β–cyclodextrin,” Journal of Pharmaceutical and Biomedical Analysis, vol. 21, no. 2, pp. 393–398, 1999.
View at: Publisher Site | Google Scholar
R. Pomponio, R. Gotti, J. Fiori et al., “Photostability studies on nicardipine-cyclodextrin complexes by capillary electrophoresis,” Journal of Pharmaceutical and Biomedical Analysis, vol. 35, no. 2, pp. 267–275, 2004.
View at: Publisher Site | Google Scholar
R. Challa, A. Ahuja, J. Ali, and R. K. Khar, “Cyclodextrins in drug delivery: an updated review,” AAPS PharmSciTech, vol. 6, no. 2, pp. E329–E357, 2005.
View at: Publisher Site | Google Scholar
M. J. Habib and A. F. Asker, “Photostabilization of riboflavin by incorporation into liposomes,” Journal of Parenteral Science and Technology, vol. 15, no. 3, pp. 124–127, 1991.
View at: Google Scholar
Y. L. Loukas, P. Jayasekera, and G. Gregoriadis, “Characterization and photoprotection studies of a model γ–cyclodextrin-included photolabile drug entrapped in liposomes incorporating light absorbers,” Journal of Physical Chemistry, vol. 99, no. 27, pp. 11035–11040, 1995.
View at: Publisher Site | Google Scholar
Y. L. Loukas, P. Jayasekera, and G. Gregoriadis, “Novel liposome-based multicomponent systems for the protection of photolabile agents,” International Journal of Pharmaceutics, vol. 117, no. 1, pp. 85–94, 1995.
View at: Publisher Site | Google Scholar
B. B. Bhowmik and A. Sil, “Photoinduced interaction of riboflavin dye with different reducing agents in aqueous and liposome media,” Chemistry and Physics of Lipids, vol. 127, no. 2, pp. 189–197, 2004.
View at: Publisher Site | Google Scholar
I. Ahmad, A. Arsalan, S. A. Ali et al., “Formulation and stabilization of riboflavin in liposomal preparations,” Journal of Photochemistry and Photobiology B: Biology, vol. 153, pp. 358–366, 2015.
View at: Publisher Site | Google Scholar
S. Bandak, A. Ramu, Y. Barenholz, and A. Gabizon, “Reduced UV-induced degradation of doxorubicin encapsulated in polyethyleneglycol-coated liposomes,” Pharmaceutical Research, vol. 16, no. 6, pp. 841–846, 1999.
View at: Publisher Site | Google Scholar
M. E. Carlotti, V. Rossatto, M. Gallarate, M. Trotta, and F. Debernardi, “Vitamin A palmitate photostability and stability over time,” Journal of Cosmetic Science, vol. 55, no. 3, pp. 233–252, 2004.
View at: Google Scholar
J. L. Vázquez, M. Berlanga, S. Merino et al., “Determination by fluorimetric titration of the ionization constants of ciprofloxacin in solution and in the presence of liposomes,” Photochemistry and Photobiology, vol. 73, no. 1, pp. 14–19, 2001.
View at: Publisher Site | Google Scholar
M. Budai, P. Gróf, A. Zimmer, K. Pápai, I. Klebovich, and K. Ludányi, “UV light induced photodegradation of liposome encapsulated fluoroquinolones: an MS study,” Journal of Photochemistry and Photobiology A: Chemistry, vol. 198, no. 2-3, pp. 268–273, 2008.
View at: Publisher Site | Google Scholar
M. Fadel and K. Kassab, “Evaluation of the photostability and photodynamic efficacy of Rose Bengal loaded in multivesicular liposomes,” Tropical Journal of Pharmaceutical Research, vol. 10, no. 3, pp. 289–297, 2011.
View at: Publisher Site | Google Scholar
G. Ragno, E. Cione, A. Garofalo et al., “Design and monitoring of photostability systems for amlodipine dosage forms,” International Journal of Pharmaceutics, vol. 265, no. 1-2, pp. 125–132, 2003.
View at: Publisher Site | Google Scholar
G. Ioele, E. Cione, A. Risoli, G. Genchi, and G. Ragno, “Accelerated photostability study of tretinoin and isotretinoin in liposome formulations,” International Journal of Pharmaceutics, vol. 293, no. 1-2, pp. 251–260, 2005.
View at: Publisher Site | Google Scholar
Y. Sadzuka, K. Nakagawa, H. Yoshioka, and T. Sonobe, “A liposomal formulation study of 2,7-dichlorodihydrofluorescein for detection of reactive oxygen species,” International Journal of Pharmaceutics, vol. 356, no. 1-2, pp. 300–305, 2008.
View at: Publisher Site | Google Scholar
J. Cheng, J.-B. Zhu, N. Wen, and F. Xiong, “Stability and pharmacokinetic studies of O-palmitoyl amylopectin anchored dipyridamole liposomes,” International Journal of Pharmaceutics, vol. 313, no. 1-2, pp. 136–143, 2006.
View at: Publisher Site | Google Scholar
S. M. T. Nunes, F. S. Sguilla, and A. C. Tedesco, “Photophysical studies of zinc phthalocyanine and chloroaluminum phthalocyanine incorporated into liposomes in the presence of additives,” Brazilian Journal of Medical and Biological Research, vol. 37, no. 2, pp. 273–284, 2004.
View at: Publisher Site | Google Scholar
M. J. Habib and J. A. Rogers, “Stabilization of local anesthetics in liposomes,” Drug Development and Industrial Pharmacy, vol. 13, no. 9–11, pp. 1947–1971, 1987.
View at: Publisher Site | Google Scholar
M. Michaelis, A. Zimmer, N. Handjou, J. Cinatl, and J. Cinatl Jr., “Increased systemic efficacy of aphidicolin encapsulated in liposomes,” Oncology Reports, vol. 13, no. 1, pp. 157–160, 2005.
View at: Google Scholar
L. Lachman, P. DeLuca, and M. J. Akers, “Kinetics principles and stability testing,” in The Theory and Practice of Industrial Pharmacy, L. Lachman, H. A. Lieberman, and J. L. Kanig, Eds., pp. 760–803, Lea & Febiger, Philadelphia, Pa, USA, 3rd edition, 1986.
View at: Google Scholar
I. Ahmad, M. A. Sheraz, S. Ahmed, R. Bano, and F. H. M. Vaid, “Photochemical interaction of ascorbic acid with riboflavin, nicotinamide and α-tocopherol in cream formulations,” International Journal of Cosmetic Science, vol. 34, no. 2, pp. 123–131, 2012.
View at: Publisher Site | Google Scholar
M. J. Habib and A. F. Asker, “Photostabilization of doxorubicin hydrochloride with radioprotective and photoprotective agents: potential mechanism for enhancing chemotherapy during radiotherapy,” Journal of Parenteral Science and Technology, vol. 43, no. 6, pp. 259–261, 1989.
View at: Google Scholar
W. J. M. Underberg and H. Lingeman, “Aspects of the chemical stability of mitomycin and porfiromycin in acidic solution,” Journal of Pharmaceutical Sciences, vol. 72, no. 5, pp. 549–553, 1978.
View at: Publisher Site | Google Scholar
T. Ahmad and I. Ahmad, “The effect of antioxidants on the photolysis of aqueous sulphacetamide and sulfanilamide solutions,” Polish Journal of Pharmacology and Pharmacy, vol. 35, no. 1, pp. 69–75, 1983.
View at: Google Scholar
M. J. O'Neil, Ed., The Merck Index, Merck & Co., Rahway, NJ, USA, 13th edition, 2001.
J. Sawicka, “The influence of excipients and technological process on cholecalciferol stability and its liberation from tablets,” Die Pharmazie, vol. 46, no. 7, pp. 519–521, 1991.
View at: Google Scholar
K. Akimoto, H. Nakagawa, and I. Sugimoto, “Photo-stability of cianidanol in aqueous solution and in the solid state,” Drug Development and Industrial Pharmacy, vol. 11, no. 4, pp. 865–889, 1985.
View at: Publisher Site | Google Scholar
A. F. Asker and M. J. Habib, “Effect of certain stabilizers on photobleacing of riboflavin solutions,” Drug Development and Industrial Pharmacy, vol. 16, no. 1, pp. 149–156, 1990.
View at: Publisher Site | Google Scholar
J. Koziol, “Studies on flavins in organic solvents—II. Photodecomposition of riboflavin in the presence of oxygen,” Photochemistry and Photobiology, vol. 5, no. 1, pp. 55–62, 1966.
View at: Publisher Site | Google Scholar
W. C. Schmidt, “Light-induced redox cycles of flavins in various alcohol/acetic acid mixtures,” Photochemistry and Photobiology, vol. 36, no. 6, pp. 699–703, 1982.
View at: Google Scholar
W. W. Moore and R. C. Ireton, “The photochemistry of riboflavin. V. The photodegradation of isoalloxazines in alcoholic solvents,” Photochemistry and Photobiology, vol. 25, no. 4, pp. 347–356, 1977.
View at: Publisher Site | Google Scholar
I. Ahmad, Z. Anwar, S. Ahmed, M. A. Sheraz, R. Bano, and A. Hafeez, “Solvent effect on the photolysis of riboflavin,” AAPS PharmSciTech, vol. 16, no. 5, pp. 1122–1128, 2015.
View at: Publisher Site | Google Scholar
G. R. Brunk, K. A. Martin, and A. M. Nishimura, “A study of solvent effects on the phosphorescence properties of flavins,” Biophysical Journal, vol. 16, no. 2, pp. 1373–1384, 1976.
View at: Google Scholar
I. Ahmad, R. Bano, S. G. Musharraf et al., “Photodegradation of moxifloxacin in aqueous and organic solvents: a kinetic study,” AAPS PharmSciTech, vol. 15, no. 6, pp. 1588–1597, 2014.
View at: Publisher Site | Google Scholar
P. Bilski, L. J. Martinez, E. B. Koker, and C. F. Chignell, “Influence of solvent polarity and proticity on the photochemical properties of norfloxacin,” Photochemistry and Photobiology, vol. 68, no. 1, pp. 20–24, 1998.
View at: Publisher Site | Google Scholar
M. M. Haque and M. Muneer, “Photodegradation of norfloxacin in aqueous suspensions of titanium dioxide,” Journal of Hazardous Materials, vol. 145, no. 1-2, pp. 51–57, 2007.
View at: Publisher Site | Google Scholar
C. B. Grissom, A. M. Chagovetz, and Z. Wang, “Use of viscosigens to stabilize vitamin B₁₂ solutions against photolysis,” Journal of Pharmaceutical Sciences, vol. 82, no. 6, pp. 641–643, 1993.
View at: Publisher Site | Google Scholar
S. M. Blaug and B. Hajratwala, “Kinetics of aerobic oxidation of ascorbic acid,” Journal of Pharmaceutical Sciences, vol. 61, no. 4, pp. 556–562, 1972.
View at: Publisher Site | Google Scholar
A. F. Asker, D. Canady, and C. Cobb, “Influence of DL-methionine on the photostability of ascorbic acid solutions,” Drug Development and Industrial Pharmacy, vol. 11, no. 12, pp. 2109–2125, 1985.
View at: Publisher Site | Google Scholar

Copyright

Copyright © 2016 Iqbal Ahmad et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

62823

Downloads

12719

Citations