A Comparative Analysis of 2-(Thiocyanomethylthio)-Benzothiazole Degradation Using Electro-Fenton and Anodic Oxidation on a Boron-Doped Diamond Electrode

Figure 4

Typical j-E curves obtained by sampling current density at different times from typical current transients obtained at potential pulses between −1.8 V < E > 0.1 V using a stainless steel electrode in a blank solution (NaCl 0.02 M and Na₂SO₄ 0.03 M, pH 3; continuous lines) and in a synthetic solution (0.07 M TCMTB, 0.02 M NaCl, and 0.03 M Na₂SO₄, pH 3; dashed lines). A_RDE = 0.196 cm².