Research Article
Optimization Design of a Multibusbar Structure: The Using of a Conductive Belt
Table 1
, , , and
between adjacent two points:
, , and
were tested by I–V tester;
was calculated with (
12).
| Comparison mode | (mΩ) | (mA) | (mW) | (mW) |
| A versus B | 0.49 | −2.29 | −38.25 | 36.81 | B versus C | 0.52 | −2.46 | −38.83 | 39.04 | C versus D | 0.51 | −1.60 | −36.26 | 38.27 | D versus E | 0.49 | −1.77 | −35.54 | 36.75 |
|
|