Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2014 (2014), Article ID 718926, 8 pages
http://dx.doi.org/10.1155/2014/718926
Research Article

Correlation of Processing, Inner Structure, and Part Properties of Injection Moulded Thin-Wall Parts on Example of Polyamide 66

Institute of Polymer Technology, University Erlangen-Nuernberg, Am Weichselgarten 9, 91058 Erlangen, Germany

Received 2 September 2014; Revised 26 November 2014; Accepted 30 November 2014; Published 21 December 2014

Academic Editor: Jan-Chan Huang

Copyright © 2014 Dietmar Drummer and Steve Meister. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Dietmar Drummer and Steve Meister, “Correlation of Processing, Inner Structure, and Part Properties of Injection Moulded Thin-Wall Parts on Example of Polyamide 66,” International Journal of Polymer Science, vol. 2014, Article ID 718926, 8 pages, 2014. doi:10.1155/2014/718926