Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 134714, 5 pages
http://dx.doi.org/10.1155/2015/134714
Research Article

Environmental Impacts on the Strength Parameters of Mineral-Acrylic (PMMA/ATH) Facade Panels

Building and Structure Physics Division, Institute of Building Materials and Structures, Faculty of Civil Engineering, Cracow University of Technology, 31-155 Cracow, Poland

Received 6 August 2015; Revised 15 November 2015; Accepted 17 November 2015

Academic Editor: Gonzalo Martínez-Barrera

Copyright © 2015 Aleksander Byrdy and Michał Kołaczkowski. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Mackey and L. Wright, “Periodic heat flow-composite walls or roofs,” Transactions of the American Society of Heating and Ventilating Engineers, vol. 52, pp. 283–296, 1946. View at Google Scholar
  2. C. Basaran, S. Nie, and C. S. Hutchins, “Time dependent behavior of a particle filled composite PMMA/ATH at elevated temperatures,” Journal of Composite Materials, vol. 42, no. 19, pp. 2003–2025, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. E. Gunel and C. Basaran, “Influence of filler content and interphase properties on large deformation micromechanics of particle filled acrylics,” Mechanics of Materials, vol. 57, pp. 134–146, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. Centre Scientifique et Technique du Bâtiment (CSTB), “Marne-la-Vallée,” Rapport d'Essais CLC 09-26016148/26022557, Centre Scientifique et Technique du Bâtiment (CSTB), 2010. View at Google Scholar
  5. International Organization for Standardization, “Ceramic tiles. Determination of frost resistance,” EN ISO 10545-12:1997, International Organization for Standardization, 1997. View at Google Scholar
  6. S. Nie, C. Basaran, C. S. Hutchins, and H. Ergun, “Failure mechanisms in PMMA/ATH acrylic casting dispersion,” Journal of the Mechanical Behavior of Materials, vol. 17, no. 2, pp. 79–96, 2006. View at Publisher · View at Google Scholar
  7. D. B. Marshall and A. G. Evans, “Failure mechanisms in ceramic-fiber/ceramic-matrix composites,” Journal of the American Ceramic Society, vol. 68, no. 5, pp. 225–231, 1985. View at Publisher · View at Google Scholar · View at Scopus
  8. R. M. Santos, G. L. Botelho, C. Cramez, and A. V. Machado, “Outdoor and accelerated weathering of acrylonitrile-butadiene-styrene: a correlation study,” Polymer Degradation and Stability, vol. 98, no. 10, pp. 2111–2115, 2013. View at Publisher · View at Google Scholar · View at Scopus