Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 213583, 8 pages
http://dx.doi.org/10.1155/2015/213583
Research Article

Shear Behavior of Concrete Beams Reinforced with GFRP Shear Reinforcement

Department of Architectural Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 446-701, Republic of Korea

Received 5 August 2015; Revised 23 September 2015; Accepted 27 September 2015

Academic Editor: Gonzalo Martínez-Barrera

Copyright © 2015 Heecheul Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. Higgins, G. T. Williams, M. M. Mitchell, M. R. Dawson, and D. Howell, “Shear strength of reinforced concrete girders with carbon fiber-reinforced polymer: experimental results,” ACI Structural Journal, vol. 109, no. 6, pp. 805–814, 2012. View at Google Scholar · View at Scopus
  2. F.-Y. Yeh and K.-C. Chang, “Size and shape effects on strength and ultimate strain in FRP confined rectangular concrete columns,” Journal of Mechanics, vol. 28, no. 4, pp. 677–690, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Mofidi and O. Chaallal, “Shear strengthening of RC beams with externally bonded FRP composites: effect of strip-width-to-strip-spacing ratio,” Journal of Composites for Construction, vol. 15, no. 5, pp. 732–742, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. M. M. R. Taha, M. J. Masia, K.-K. Choi, P. L. Shrive, and N. G. Shrive, “Creep effects in plain and fiber-reinforced polymer-strengthened reinforced concrete beams,” ACI Structural Journal, vol. 107, no. 6, pp. 627–635, 2010. View at Google Scholar · View at Scopus
  5. C. Mazzotti, M. Savoia, and B. Ferracuti, “An experimental study on delamination of FRP plates bonded to concrete,” Construction and Building Materials, vol. 22, no. 7, pp. 1409–1421, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. R. A. Hawileh, H. A. Rasheed, J. A. Abdalla, and A. K. Al-Tamimi, “Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems,” Materials and Design, vol. 53, pp. 972–982, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. K. Al-Tamimi, R. Hawileh, J. Abdalla, and H. A. Rasheed, “Effects of ratio of CFRP plate length to shear span and end anchorage on flexural behavior of SCC RC beams,” Journal of Composites for Construction, vol. 15, no. 6, pp. 908–919, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. T. Hassan and S. Rizkalla, “Investigation of bond in concrete structures strengthened with near surface mounted carbon fiber reinforced polymer strips,” Journal of Composites for Construction, vol. 7, no. 3, pp. 248–257, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. ACI Committee 440.1R, Guide for the Design and Construction of Concrete Reinforced with FRP Bars (ACI 440.1R-06), American Concrete Institute, Farmington Hills, Mich, USA, 2006.
  10. Canadian Standard Association (CSA), Design and Construction of Building Components with Fiber Reinforced Polymers (CSA S806-02), Canadian Standard Association (CSA), Mississauga, Canada, 2002.
  11. Intelligent Sensing for Innovative Structures (ISIS), Canada Reinforcing Concrete Structures with Fibre Reinforced Polymers (ISIS-M03-01), ISIS Canada Resource Centre, Winnipeg, Canada, 2001.
  12. M. R. Ehsani, H. Saadatmanesh, and S. Tao, “Bond of hooked glass fiber reinforced plastic (GFRP) reinforcing bars to concrete,” ACI Materials Journal, vol. 92, no. 4, pp. 391–400, 1995. View at Google Scholar
  13. K. Ishihara, T. Obara, Y. Satao, T. Ueda, and Y. Kakuta, “Evaluation of ultimate strength of FRP rods at bent up portion,” in Proceedings of the 3rd International Symposium on Non-Metallic (FRP) Reinforcement for Concrete Structures, pp. 27–34, Sapporo, Japan, 1997.
  14. E. Shehata, R. Morphy, and S. Rizkalla, “Fibre reinforced polymer shear reinforcement for concrete members: behaviour and design guidelines,” Canadian Journal of Civil Engineering, vol. 27, no. 5, pp. 859–872, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. A. K. El-Sayed, E. El-Salakawy, and B. Benmokrane, “Mechanical and structural characterization of new carbon FRP stirrups for concrete members,” Journal of Composites for Construction, vol. 11, no. 4, pp. 352–362, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. D.-J. Kim, M. S. Kim, J. Choi, H. Kim, A. Scanlon, and Y. H. Lee, “Concrete beams with fiber-reinforced polymer shear reinforcement,” ACI Structural Journal, vol. 111, no. 4, pp. 903–911, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. ASTM International, “Standard test method for compressive strength of cylindrical concrete specimens,” ASTM C 39, ASTM International, West Conshohocken, Pa, USA, 2001. View at Google Scholar