Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2015, Article ID 721035, 7 pages
http://dx.doi.org/10.1155/2015/721035
Research Article

Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning

1Department of Chemistry, National University of Río Cuarto, Route 36, km 601, 5800 Rio Cuarto, Argentina
2Faculty of Engineering, National University of Río Cuarto, Route 36, km 601, 5800 Rio Cuarto, Argentina
3Fraunhofer Institute for Material and Beam Technology, Winterbergstraße 28, 01277 Dresden, Germany
4Technische Universität Dresden, Institute of Manufacturing Technology, George-Bähr-Straße 3c, 01069 Dresden, Germany

Received 1 January 2015; Accepted 12 February 2015

Academic Editor: Angel Concheiro

Copyright © 2015 Martin F. Broglia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. E. McKee, A. Kistenmacher, H. Goerrissen, and M. Breulmann, “Chapter 16. Synthesis, properties and applications of acrylonitrile-styrene-acrylate polymers,” in Modern Styrenic Polymers: Polystyrenes and Styrenic Copolymers, J. Scheirs and D. B. Priddy, Eds., John Wiley & Sons, New York, NY, USA, 2003. View at Publisher · View at Google Scholar
  2. G. P. Ziemba, “Acrylonitrile-styrene copolymers,” in Encyclopedia of Polymer Science and Technology, H. F. Mark, N. G. Gaylord, and N. M. Bikales, Eds., vol. 1, pp. 425–435, Interscience, New York, NY, USA, 1964. View at Google Scholar
  3. J. Maul, B. G. Frushour, J. R. Kontoff, H. Eichenauer, K. H. Ott, and C. Schade, “Polystyrene and styrene copolymers,” in Ullmann's Encyclopedia of Industrial Chemistry, B. Elvers, S. Hawkins, and W. Russey, Eds., Wiley-VCH, Weinheim, Germany, 2003. View at Publisher · View at Google Scholar
  4. M. Ulcnik-Krump, R. Stadler, and T. Malavasic, “Investigation of properties of compatibilized TPU/SAN blends,” Macromolecular Symposia, vol. 149, no. 1, pp. 131–136, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Pötschke and D. R. Paul, “Detection of co-continuous structures in SAN/PA6 blends by different methods,” Macromolecular Symposia, vol. 198, no. 1, pp. 69–82, 2003. View at Publisher · View at Google Scholar
  6. E. M. Woo, T. K. Mandal, and L. L. Chang, “Window of acrylonitrile content for miscibility in blends comprising poly(styrene-co-acrylonitrile)s and poly(benzyl methacrylate),” Macromolecules, vol. 33, no. 11, pp. 4186–4192, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. H. R. Lohokare, S. C. Kumbharkar, Y. S. Bhole, and U. K. Kharul, “Surface modification of polyacrylonitrile based ultrafiltration membrane,” Journal of Applied Polymer Science, vol. 101, no. 6, pp. 4378–4385, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Kumar, I. Roy, T. Y. Ohulchanskyy et al., “Covalently dye-linked, surface-controlled, and bioconjugated organically modified silica nanoparticles as targeted probes for optical imaging,” ACS Nano, vol. 2, no. 3, pp. 449–456, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. F. Yu, P. Li, H. Shen et al., “Laser interference lithography as a new and efficient technique for micropatterning of biopolymer surface,” Biomaterials, vol. 26, no. 15, pp. 2307–2312, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Yu, F. Mücklich, P. Li et al., “In vitro cell response to a polymer surface micropatterned by laser interference lithography,” Biomacromolecules, vol. 6, no. 3, pp. 1160–1167, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Yuan, A. Lasagni, P. Shao, and S. Das, “Rapid prototyping of microstructured hydrogels via laser direct-write and laser interference photopolymerisation,” Virtual and Physical Prototyping, vol. 3, no. 4, pp. 221–229, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. A. S. A. Ramazani, S. A. Mousavi, E. Seyedjafari et al., “Corrigendum to ‘Polycarbonate surface cell's adhesion examination after Nd:YAG laser irradiation’,” Materials Science and Engineering C, vol. 29, pp. 1491–1497, 2009. View at Publisher · View at Google Scholar
  13. W. Lee, M.-K. Jin, W.-C. Yoo, and J.-K. Lee, “Nanostructuring of a polymeric substrate with well-defined nanometer-scale topography and tailored surface wettability,” Langmuir, vol. 20, no. 18, pp. 7665–7669, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. A. F. Lasagni, D. F. Acevedo, C. A. Barbero, and F. Mücklich, “One-step production of organized surface architectures on polymeric materials by direct laser interference patterning,” Advanced Engineering Materials, vol. 9, no. 1-2, pp. 99–104, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. A. F. Lasagni, D. F. Acevedo, C. A. Barbero, and F. Mücklich, “Direct patterning of polystyrene-polymethyl methacrylate copolymer by means of laser interference lithography using UV laser irradiation,” Polymer Engineering and Science, vol. 48, no. 12, pp. 2367–2372, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. N. Scharnagl and M. Schossig, “Charakterisierung von membranen,” Chemie-Ingenieur-Technik, vol. 77, no. 5, pp. 517–526, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. C. A. Schneider, W. S. Rasband, and K. W. Eliceiri, “NIH Image to ImageJ: 25 years of image analysis,” Nature Methods, vol. 9, no. 7, pp. 671–675, 2012. View at Publisher · View at Google Scholar · View at Scopus
  18. T. Takeuchi, S. Tsuge, and Y. Sugimura, “Near-infrared spectrophotometric analysis of styrene–acrylonitrile copolymer,” Journal of Polymer Science Part A-1: Polymer Chemistry, vol. 6, no. 12, pp. 3415–3417, 1968. View at Publisher · View at Google Scholar
  19. K. Arita, T. Ohtomo, and Y. Tsurmi, “Analysis of the monomer sequence distribution in alternating acrylonitrile styrene copolymers by C13-NMR,” Journal of Polymer Science: Polymer Letters Edition, vol. 19, pp. 211–216, 1981. View at Google Scholar
  20. E. Penzel, J. Rieger, and H. A. Schneider, “The glass transition temperature of random copolymers: 1. Experimental data and the Gordon-Taylor equation,” Polymer, vol. 38, no. 2, pp. 325–337, 1997. View at Publisher · View at Google Scholar · View at Scopus
  21. C. Motta, “The effect of copolymerization on transition temperatures of polymeric materials,” Journal of Thermal Analysis, vol. 49, no. 1, pp. 461–464, 1997. View at Publisher · View at Google Scholar · View at Scopus
  22. J. A. Brydson, Plastics Materials, Butterworth-Heinemann, Munich, Germany, 5th edition, 1989.
  23. S. Nishio, T. Chiba, A. Matsuzaki, and H. Sato, “Control of structures of deposited polymer films by ablation laser wavelength: polyacrylonitrile at 308, 248, and 193 nm,” Journal of Applied Physics, vol. 79, no. 9, pp. 7198–7204, 1996. View at Publisher · View at Google Scholar · View at Scopus
  24. N. Grassie and R. McGuchan, “Pyrolysis of polyacrylonitrile and related polymers-I. Thermal analysis of polyacrylonitrile,” European Polymer Journal, vol. 6, no. 9, pp. 1277–1291, 1970. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Leroy, C. Boiziau, J. Perreau et al., “Molecular structure of an electropolymerized polyacrylonitrile film and its pyroylzed derivatives,” Journal of Molecular Structure, vol. 128, no. 4, pp. 269–281, 1985. View at Publisher · View at Google Scholar · View at Scopus
  26. M. M. Coleman and R. J. Petcavich, “Fourier transform infrared studies on the thermal degradation of polyacrylonitrile,” Journal of Polymer Science Polymer Physics Edition, vol. 16, no. 5, pp. 821–832, 1978. View at Google Scholar · View at Scopus
  27. S. Nishio, T. Chiba, A. Matsuzaki, and H. Sato, “Preparation of polymer films by laser ablation of polyacrylonitrile: significant dependence on ablation wavelengths,” Applied Surface Science, vol. 106, pp. 132–136, 1996. View at Publisher · View at Google Scholar · View at Scopus
  28. W. J. Burlant and J. L. Parsons, “Pyrolysis of polyacrylonitrile,” Journal of Polymer Science, vol. 22, no. 101, pp. 249–256, 1956. View at Publisher · View at Google Scholar
  29. D. F. Acevedo, A. F. Lasagni, M. Cornejo, M. Politano, C. Barbero, and F. Mücklich, “Large area fabrication of tuned polystyrene/poly(methylmethacrylate) periodic structures using laser interference patterning,” Langmuir, vol. 25, no. 16, pp. 9624–9628, 2009. View at Publisher · View at Google Scholar
  30. S. Lazare, I. Elaboudi, M. Castillejo, and A. Sionkowska, “Model properties relevant to laser ablation of moderately absorbing polymers,” Applied Physics A: Materials Science and Processing, vol. 101, no. 1, pp. 215–224, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. S. A. Saq'an, A. S. Ayesh, A. M. Zihlif, E. Martuscelli, and G. Ragosta, “Physical properties of polystyrene/alum composites,” Polymer Testing, vol. 23, no. 7, pp. 739–745, 2004. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Lifshitz, M. Bidani, A. Suslensky, and C. Tamburu, “Pyrolysis of acrylonitrile at elevated temperatures. Studies with a single-pulse shock tube,” Journal of Physical Chemistry, vol. 93, no. 4, pp. 1369–1373, 1989. View at Publisher · View at Google Scholar · View at Scopus
  33. J. H. Hall and M. Gisler, “A simple method for converting nitriles to amides. Hydrolysis with potassium hydroxide in tert-butyl alcohol,” The Journal of Organic Chemistry, vol. 41, no. 23, pp. 3769–3770, 1976. View at Google Scholar