Effect of Die Head Temperature at Compounding Stage on the Degradation of Linear Low Density Polyethylene/Plastic Film Waste Blends after Accelerated Weathering

<div>Strain at break (%) measured for the studied materials in comparison to the commercial grade products. Die Head Temperature (DHT) = (a) 175°C, (b) 185°C, and (c) 195°C.</div>

International Journal of Polymer Science

fig3

Figure 3

Figure 3: Effect of Die Head Temperature at Compounding Stage on the Degradation of Linear Low Density Polyethylene/Plastic Film Waste Blends after Accelerated Weathering 

Figure 3 | Effect of Die Head Temperature at Compounding Stage on the Degradation of Linear Low Density Polyethylene/Plastic Film Waste Blends after Accelerated Weathering 