Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2016, Article ID 6514041, 11 pages
http://dx.doi.org/10.1155/2016/6514041
Research Article

The Effect of Customized Woven and Stacked Layer Orientation on Tensile and Flexural Properties of Woven Kenaf Fibre Reinforced Epoxy Composites

1Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
2Aerospace Manufacturing Research Centre (AMRC), Level 7, Tower Block, Faculty of Engineering, Universiti Putra Malaysia, 43400 Serdang, Selangor, Malaysia
3Department Engineering Mechanics, Faculty of Mechanical and Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia

Received 2 October 2015; Revised 27 January 2016; Accepted 1 February 2016

Academic Editor: Yiqi Yang

Copyright © 2016 A. Hamdan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

A. Hamdan, F. Mustapha, K. A. Ahmad, A. S. Mohd Rafie, M. R. Ishak, and A. E. Ismail, “The Effect of Customized Woven and Stacked Layer Orientation on Tensile and Flexural Properties of Woven Kenaf Fibre Reinforced Epoxy Composites,” International Journal of Polymer Science, vol. 2016, Article ID 6514041, 11 pages, 2016. https://doi.org/10.1155/2016/6514041.