Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2016, Article ID 6978434, 8 pages
http://dx.doi.org/10.1155/2016/6978434
Research Article

Preparation and Application of Cationic Modified Cellulose Fibrils as a Papermaking Additive

1Tianjin Key Laboratory of Pulp and Paper, Tianjin University of Science and Technology, Tianjin 300457, China
2China National Pulp and Paper Research Institute, Beijing 100102, China
3National Center for Nanoscience and Technology, Beijing 100190, China

Received 21 February 2016; Revised 11 May 2016; Accepted 26 May 2016

Academic Editor: Haisong Qi

Copyright © 2016 Yanhong Gao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Zhang, Z. Pang, C. Dong, and Z. Liu, “Preparing cationic cotton linter cellulose with high substitution degree by ultrasonic treatment,” Carbohydrate Polymers, vol. 132, Article ID 10046, pp. 214–220, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. W. Shi, Y. Zhang, Q. Qin, and X. Chen, “Research progress in novel functional materials—cationic cellulose,” Materials Review, vol. 1, article 19, 2010. View at Google Scholar
  3. M. Stefansson, “Characterization of cellulose derivatives and their migration behavior in capillary electrophoresis,” Carbohydrate Research, vol. 312, no. 1-2, pp. 45–52, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Rodríguez, C. Alvarez-Lorenzo, and A. Concheiro, “Cationic cellulose hydrogels: kinetics of the cross-linking process and characterization as pH-/ion-sensitive drug delivery systems,” Journal of Controlled Release, vol. 86, no. 2-3, pp. 253–265, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Baiardo, G. Frisoni, M. Scandola, and A. Licciardello, “Surface chemical modification of natural cellulose fibers,” Journal of Applied Polymer Science, vol. 83, no. 1, pp. 38–45, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Sirviö, A. Honka, H. Liimatainen, J. Niinimäki, and O. Hormi, “Synthesis of highly cationic water-soluble cellulose derivative and its potential as novel biopolymeric flocculation agent,” Carbohydrate Polymers, vol. 86, no. 1, pp. 266–270, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Chaker and S. Boufi, “Cationic nanofibrillar cellulose with high antibacterial properties,” Carbohydrate Polymers, vol. 131, pp. 224–232, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. E. Gruber, “Is there a future for chemically modified pulp?” Internationale Papierwirtschaft IPW, no. 6, pp. 73–85, 2002. View at Google Scholar · View at Scopus
  9. X. Cai, B. Riedl, and A. Ait-Kadi, “Effect of surface-grafted ionic groups on the performance of cellulose-fiber-reinforced thermoplastic composites,” Journal of Polymer Science Part B: Polymer Physics, vol. 41, no. 17, pp. 2022–2032, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Hasani, E. D. Cranston, G. Westman, and D. G. Gray, “Cationic surface functionalization of cellulose nanocrystals,” Soft Matter, vol. 4, no. 11, pp. 2238–2244, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Montazer, R. M. A. Malek, and A. Rahimi, “Salt free reactive dyeing of cationized cotton,” Fibers and Polymers, vol. 8, no. 6, pp. 608–612, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. O. B. Wurzburg, Modified Starches-properties and Uses, CRC Press, New York, NY, USA, 1986.
  13. M. I. Khalil, M. K. Beliakova, and A. A. Aly, “Preparation of some starch ethers using the semi-dry state process,” Carbohydrate Polymers, vol. 46, no. 3, pp. 217–226, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Liu, Y. Ni, P. Fatehi, and A. Saeed, “Isolation and cationization of hemicelluloses from pre-hydrolysis liquor of kraft-based dissolving pulp production process,” Biomass & Bioenergy, vol. 35, no. 5, pp. 1789–1796, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Su, H. Du, Y. Huo et al., “Characterization of cationic starch flocculants synthesized by dry process with ball milling activating method,” International Journal of Biological Macromolecules, vol. 87, pp. 34–40, 2016. View at Publisher · View at Google Scholar
  16. J. L. Ren, R. C. Sun, C. F. Liu, Z. Y. Chao, and W. Luo, “Two-step preparation and thermal characterization of cationic 2-hydroxypropyltrimethylammonium chloride hemicellulose polymers from sugarcane bagasse,” Polymer Degradation & Stability, vol. 91, no. 11, pp. 2579–2587, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. L. Halab-Kessira and A. Ricard, “Use of the trial and error method for the optimization of the graft copolymerization of a cationic monomer onto cellulose,” European Polymer Journal, vol. 35, no. 6, pp. 1065–1071, 1999. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Bates and D. Willis, “Cationic pulp by means of substantively fixed aluminium,” APPITA, vol. 37, no. 5, pp. 409–413, 1984. View at Google Scholar
  19. M. Sain and J. Boucher, “Characterization and properties of lignocellulosic fibers with thin-film deposited cationic precursor,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 196, no. 2-3, pp. 97–109, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Montplaisir, B. Chabot, and C. Daneault, “Cationisation of thermomechanical pulp fibres: part 1 grafting reaction optimisation,” Pulp and Paper Canada, vol. 107, no. 10, pp. 29–32, 2006. View at Google Scholar · View at Scopus
  21. W. Xie, H.-L. Feng, and X.-R. Qian, “Preparation and application of cationized pulp fiber as a papermaking wet-end additive,” Journal of Forestry Research, vol. 19, no. 3, pp. 235–238, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Montplaisir, B. Chabot, and C. Daneault, “Cationisation of thermomechanical pulp fibres. Part 2: influence on strength and retention,” Pulp & Paper Canada, vol. 107, no. 11, pp. 39–42, 2006. View at Google Scholar · View at Scopus
  23. K. Hu, Y. Ni, and X. Zou, “Substitution of aspen high-yield pulp for hardwood kraft pulp in fine papers and its effect on AKD sizing,” Tappi Journal, vol. 3, no. 8, pp. 13–16, 2004. View at Google Scholar · View at Scopus
  24. K. Hu, Y. Ni, Y. Zhou, and X. Zou, “Substitution of hardwood kraft with aspen high-yield pulp in lightweight coated wood-free papers: part I. Synergy of basestock properties,” Tappi Journal, vol. 5, no. 3, pp. 21–26, 2006. View at Google Scholar · View at Scopus
  25. E. C. Xu and Y. Zhou, “Synergistic effects between chemical mechanical pulps and chemical pulps from hardwoods,” Tappi Journal, vol. 6, no. 11, pp. 4–9, 2007. View at Google Scholar · View at Scopus
  26. H. Liu, Y. Chen, H. Zhang et al., “Increasing the use of high-yield pulp in coated high-quality wood-free papers: from laboratory demonstration to mill trials,” Industrial and Engineering Chemistry Research, vol. 51, no. 11, pp. 4240–4246, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. R. I. Korpinen and P. E. Fardim, “Reinforcement potential of bleached sawdust kraft pulp in different mechanical pulp furnishes,” BioResources, vol. 4, no. 4, pp. 1572–1585, 2009. View at Google Scholar · View at Scopus
  28. H. Zhang, J. Li, H. Hu, Z. He, and Y. Ni, “Improvement of bleached wheat straw pulp properties by using aspen high-yield pulp,” Bioresource Technology, vol. 102, no. 3, pp. 2829–2833, 2011. View at Publisher · View at Google Scholar
  29. T. Lin, X. Yin, E. Retulainen, and M. M. Nazhad, “Effect of chemical pulp fines on filler retention and paper properties,” Appita Journal, vol. 60, no. 6, pp. 469–473, 2007. View at Google Scholar
  30. B. W. Jones, R. Venditti, S. Park, H. Jameel, and B. Koo, “Enhancement in enzymatic hydrolysis by mechanical refining for pretreated hardwood lignocellulosics,” Bioresource Technology, vol. 147, pp. 353–360, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. X. Chen, L. Tao, J. Shekiro et al., “Improved ethanol yield and reduced Minimum Ethanol Selling Price (MESP) by modifying low severity dilute acid pretreatment with deacetylation and mechanical refining: 1) experimental,” Biotechnology for Biofuels, vol. 5, article 60, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. X. Ju, C. Grego, and X. Zhang, “Specific effects of fiber size and fiber swelling on biomass substrate surface area and enzymatic digestibility,” Bioresource Technology, vol. 144, pp. 232–239, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. T. Heinze, V. Haack, and S. Rensing, “Starch derivatives of high degree of functionalization. 7. Preparation of cationic 2-hydroxypropyltrimethylammonium chloride starches,” Starch-Stärke, vol. 56, no. 7, pp. 288–296, 2004. View at Publisher · View at Google Scholar · View at Scopus
  34. M. S. Jahan, A. Saeed, Z. He, and Y. Ni, “Jute as raw material for the preparation of microcrystalline cellulose,” Cellulose, vol. 18, no. 2, pp. 451–459, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. F. Peng, J.-L. Ren, F. Xu, J. Bian, P. Peng, and R.-C. Sun, “Comparative study of hemicelluloses obtained by graded ethanol precipitation from sugarcane bagasse,” Journal of Agricultural and Food Chemistry, vol. 57, no. 14, pp. 6305–6317, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Zaman, H. Xiao, F. Chibante, and Y. Ni, “Synthesis and characterization of cationically modified nanocrystalline cellulose,” Carbohydrate Polymers, vol. 89, no. 1, pp. 163–170, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. R. Sun, X. F. Sun, G. Q. Liu, P. Fowler, and J. Tomkinson, “Structural and physicochemical characterization of hemicelluloses isolated by alkaline peroxide from barley straw,” Polymer International, vol. 51, no. 2, pp. 117–124, 2002. View at Publisher · View at Google Scholar · View at Scopus
  38. J. L. Ren, R. C. Sun, C. F. Liu, Z. Y. Chao, and W. Luo, “Two-step preparation and thermal characterization of cationic 2-hydroxypropyltrimethylammonium chloride hemicellulose polymers from sugarcane bagasse,” Polymer Degradation and Stability, vol. 91, no. 11, pp. 2579–2587, 2006. View at Publisher · View at Google Scholar · View at Scopus
  39. Z. Liu, P. Fatehi, S. Sadeghi, and Y. Ni, “Application of hemicelluloses precipitated via ethanol treatment of pre-hydrolysis liquor in high-yield pulp,” Bioresource Technology, vol. 102, no. 20, pp. 9613–9618, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Kačuráková, A. Ebringerová, J. Hirsch, and Z. Hromádková, “Infrared study of arabinoxylans,” Journal of the Science of Food and Agriculture, vol. 66, no. 3, pp. 423–427, 1994. View at Publisher · View at Google Scholar
  41. E. Hablot, P. Bordes, E. Pollet, and L. Avérous, “Thermal and thermo-mechanical degradation of poly(3-hydroxybutyrate)-based multiphase systems,” Polymer Degradation and Stability, vol. 93, no. 2, pp. 413–421, 2008. View at Publisher · View at Google Scholar · View at Scopus
  42. L. Yan, H. Tao, and P. R. Bangal, “Synthesis and flocculation behavior of cationic cellulose prepared in a NaOH/Urea aqueous solution,” Clean—Soil, Air, Water, vol. 37, no. 1, pp. 39–44, 2009. View at Publisher · View at Google Scholar · View at Scopus
  43. P. P. Danilovas, R. Rutkaite, and A. Zemaitaitis, “Thermal degradation and stability of cationic starches and their complexes with iodine,” Carbohydrate Polymers, vol. 112, pp. 721–728, 2014. View at Publisher · View at Google Scholar · View at Scopus
  44. P. Fatehi and H. Xiao, “Adsorption characteristics of cationic-modified poly (vinyl alcohol) on cellulose fibers-a qualitative analysis,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 327, no. 1–3, pp. 127–133, 2008. View at Publisher · View at Google Scholar · View at Scopus
  45. A. J. Kerr and R. P. Kibblewhite, “Method of treating lignocellulosic or cellulosic pulp to promote the kinking of pulp fibres and/or to improve paper tear strength,” Google Patents, 1980.
  46. D. Page, R. Seth, B. Jordan, and M. Barbe, “Curl, crimps, kinks and microcompressions in pulp fibres: their origin, measurement and significance,” in Proceedings of the 8th Fundamental Reseach Symposium Oxford, pp. 183–227, 1985.
  47. O. Joutsimo, R. Wathén, and T. Tamminen, “Effects of fiber deformations on pulp sheet properties and fiber strength,” Paperi ja Puu/Paper and Timber, vol. 87, no. 6, pp. 392–397, 2005. View at Google Scholar · View at Scopus
  48. P. Fatehi and H. Xiao, “Effect of cationic PVA characteristics on fiber and paper properties at saturation level of polymer adsorption,” Carbohydrate Polymers, vol. 79, no. 2, pp. 423–428, 2010. View at Publisher · View at Google Scholar · View at Scopus