Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2016 (2016), Article ID 7478161, 9 pages
http://dx.doi.org/10.1155/2016/7478161
Research Article

Antibacterial Nanocomposites Based on Fe3O4–Ag Hybrid Nanoparticles and Natural Rubber-Polyethylene Blends

1Institute for Tropical Technology, 18 Hoang Quoc Viet, Cau Giay, Hanoi, Vietnam
2Faculty of Chemical Technology, Hanoi University of Industry, Bac Tu Liem, Hanoi, Vietnam
3Department of Protein Biochemistry, Institute of Biotechnology, 18 Hoang Quoc Viet, Cau Giay, Hanoi, Vietnam
4National Institute of Occupational and Environmental Health, 57 Le Quy Don, Hai Ba Trung, Hanoi, Vietnam

Received 24 May 2016; Revised 28 September 2016; Accepted 4 October 2016

Academic Editor: Agnieszka Kyzioł

Copyright © 2016 Thanh Dung Ngo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. S. Mead, L. Slutsker, V. Dietz et al., “Food-related illness and death in the United States,” Emerging Infectious Diseases, vol. 5, no. 5, pp. 607–625, 1999. View at Publisher · View at Google Scholar · View at Scopus
  2. C. M. Schroeder, D. G. White, and J. Meng, “Retail meat and poultry as a reservoir of antimicrobial-resistant Escherichia coli,” Food Microbiology, vol. 21, no. 3, pp. 249–255, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Taptim and N. Sombatsompop, “Antimicrobial performance and the cure and mechanical properties of peroxide-cured silicone rubber compounds,” Journal of Vinyl and Additive Technology, vol. 19, no. 2, pp. 113–122, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Pehlivan, D. Balköse, S. Ülkü, and F. Tihminlioglu, “Characterization of pure and silver exchanged natural zeolite filled polypropylene composite films,” Composites Science and Technology, vol. 65, no. 13, pp. 2049–2058, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Silapasorn, K. Sombatsompop, A. Kositchaiyong, E. Wimolmala, T. Markpin, and N. Sombatsompop, “Effect of chemical structure of thermoplastics on antibacterial activity and physical diffusion of triclosan doped in vinyl thermoplastics and their composites with CaCO3,” Journal of Applied Polymer Science, vol. 121, no. 1, pp. 253–261, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. B. Seentrakoon, B. Junhasavasdikul, and W. Chavasiri, “Enhanced UV-protection and antibacterial properties of natural rubber/rutile-TiO2 nanocomposites,” Polymer Degradation and Stability, vol. 98, no. 2, pp. 566–578, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. D. H. Anh, K. Dumri, N. T. Anh, W. Punyodom, and P. Rachtanapun, “Facile fabrication of polyethylene/silver nanoparticle nanocomposites with silver nanoparticles traps and holds early antibacterial effect,” Journal of Applied Polymer Science, vol. 133, no. 17, article 43331, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. W. G. I. U. Rathnayake, H. Ismail, A. Baharin, A. G. N. D. Darsanasiri, and S. Rajapakse, “Synthesis and characterization of nano silver based natural rubber latex foam for imparting antibacterial and anti-fungal properties,” Polymer Testing, vol. 31, no. 5, pp. 586–592, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. T. R. Kondala, Ch. Jagadeeswara Rao, I. V. Kasi Viswanath, and Y. L. N. Murthy, “Anti microbial activity of nanosilverferrite composite,” International Journal of Innovative Research in Science, Engineering and Technology, vol. 4, no. 9, pp. 8590–8595, 2015. View at Google Scholar
  10. B. Chudasama, A. K. Vala, N. Andhariya, R. V. Upadhyay, and R. V. Mehta, “Enhanced antibacterial activity of bifunctional Fe3O4-Ag core-shell nanostructures,” Nano Research, vol. 2, no. 12, pp. 955–965, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Gong, H. Li, X. He et al., “Preparation and antibacterial activity of Fe3O4@Ag nanoparticles,” Nanotechnology, vol. 18, no. 28, Article ID 285604, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. D. V. Quang, P. B. Sarawade, A. Hilonga et al., “Preparation of silver nanoparticle containing silica micro beads and investigation of their antibacterial activity,” Applied Surface Science, vol. 257, no. 15, pp. 6963–6970, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. L. M. Tung, N. X. Cong, L. T. Huy et al., “Synthesis, characterizations of superparamagnetic Fe3O4-Ag hybrid nanoparticles and their application for highly effective bacteria inactivation,” Journal of Nanoscience and Nanotechnology, vol. 16, no. 6, pp. 5902–5912, 2016. View at Publisher · View at Google Scholar
  14. D. J. Elliot and A. J. Tinker, “Blends of natural rubber with thermoplastics,” in Natural Rubber: Science and Technology, A. D. Roberts, Ed., pp. 327–358, Oxford University Press, Oxford, UK, 1990. View at Google Scholar
  15. W. Pechurai, C. Nakason, and K. Sahakaro, “Thermoplastic natural rubber based on oil extended NR and HDPE blends: blend compatibilizer, phase inversion composition and mechanical properties,” Polymer Testing, vol. 27, no. 5, pp. 621–631, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Nakason, K. Nuansomsri, A. Kaesaman, and S. Kiatkamjornwong, “Dynamic vulcanization of natural rubber/high-density polyethylene blends: effect of compatibilization, blend ratio and curing system,” Polymer Testing, vol. 25, no. 6, pp. 782–796, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. H. M. Dahlan, M. D. K. Zaman, and A. Ibrahim, “Liquid natural rubber (LNR) as a compatibilizer in NR/LLDPE blends,” Journal of Applied Polymer Science, vol. 78, no. 10, pp. 1776–1782, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. M. D. Rolfe, C. J. Rice, S. Lucchini et al., “Lag phase is a distinct growth phase that prepares bacteria for exponential growth and involves transient metal accumulation,” Journal of Bacteriology, vol. 194, no. 3, pp. 686–701, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. Y. Urushihara, L. Li, J. Matsui, and T. Nishino, “In situ observation of filler displacement during tensile deformation of nanosilica-filled natural rubber using field-emission scanning electron microscope,” Composites Part A: Applied Science and Manufacturing, vol. 40, no. 2, pp. 232–234, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Hongling, Z. Baicun, L. Heng, G. Weiguang, W. Ting, and W. Weishan, “Nanosilica and polyethylene based artificial turf—abrasion resistance and mechanical properties,” Procedia Engineering, vol. 72, pp. 901–906, 2014. View at Publisher · View at Google Scholar
  21. M. Arunava, P. Sandip, M. Subrata, K. S. Achintya, T. Sabu, and S. Asmita, “Variations in specific heat and microstructure in natural rubber filled with different fillers as studied by differential scanning calorimetry,” Journal of Polymer and Biopolymer Physics Chemistry, vol. 2, no. 1, pp. 25–28, 2014. View at Google Scholar
  22. M. Dahlan, Z. M. D. Khairul, and A. Ibrahim, “Liquid natural rubber (LNR) as a compatibiliser in NR/LLDPE blends: the mixing and mechanical property studies,” in Seminar Research and Development 2000 MINT, Malaysian Institute for Nuclear Technology Research (MINT), Bangi, Malaysia, 2000. View at Google Scholar
  23. S. Che Som, NR-HDPE blends using LNR as a compatibiliser [M.S. thesis], Universiti Kebangsaan Malaysia, Kajang, Malaysia, 1993.
  24. M. A. Moyano and J. M. Martín-Martínez, “Surface treatment with UV-ozone to improve adhesion of vulcanized rubber formulated with an excess of processing oil,” International Journal of Adhesion and Adhesives, vol. 55, pp. 106–113, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. T. Ravindran, M. R. G. Nayar, and D. J. Francis, “Production of hydroxyl-terminated liquid natural rubber—mechanism of photochemical depolymerization and hydroxylation,” Journal of Applied Polymer Science, vol. 35, no. 5, pp. 1227–1239, 1988. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Ibrahim, R. Daik, and I. Abdullah, “Functionalization of liquid natural rubber via oxidative degradation of natural rubber,” Polymers, vol. 6, no. 12, pp. 2928–2941, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Liu, D. A. Sonshine, S. Shervani, and R. H. Hurt, “Controlled release of biologically active silver from nanosilver surfaces,” ACS Nano, vol. 4, no. 11, pp. 6903–6913, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. N. Lubick, “Nanosilver toxicity: ions, nanoparticles—or both?” Environmental Science & Technology, vol. 42, no. 23, p. 8617, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. Q. Li, H. Yuan, Y. Yang, Y. Zhang, and G. Bai, “Co-intensification of bio-oxidizing As-bearing gold ores,” in Characterization of Minerals, Metals and Materials 2013, J. Hwang, C. Bai, J. S. Carpenter et al., Eds., pp. 501–510, TMS (The Minerals, Metals and Materials Society), Warrendale, Pa, USA; John Wiley & Sons, ‎Hoboken, NJ, USA, 2013. View at Google Scholar
  30. M. Takahashi, P. Mohan, D. M. Mott, and S. Maenosono, “Exchange bias in Ag/FeCo/Ag core/shell/shell nanoparticles due to partial oxidation of FeCo intermediate shell,” Journal of Magnetism and Magnetic Materials, vol. 401, pp. 339–344, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. P. Mulvaney, “Surface plasmon spectroscopy of nanosized metal particles,” Langmuir, vol. 12, no. 3, pp. 788–800, 1996. View at Publisher · View at Google Scholar · View at Scopus
  32. N. Agasti and N. K. Kaushik, “One pot synthesis of crystalline silver nanoparticles,” American Journal of Nanomaterials, vol. 2, no. 1, pp. 4–7, 2014. View at Google Scholar