Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017 (2017), Article ID 1954903, 14 pages
https://doi.org/10.1155/2017/1954903
Research Article

In Situ Wire Drawing of Phosphate Glass in Polymer Matrices for Material Extrusion 3D Printing

1Polymer Extrusion Lab, W.M. Keck Center for 3D Innovation, The University of Texas at El Paso, El Paso, TX 79968, USA
2Department of Metallurgical, Materials and Biomedical Engineering, The University of Texas at El Paso, El Paso, TX 79968, USA

Correspondence should be addressed to David A. Roberson; ude.petu@nosrebord

Received 9 March 2017; Revised 22 May 2017; Accepted 28 May 2017; Published 5 July 2017

Academic Editor: J. M. Kenny

Copyright © 2017 J. Gilberto Siqueiros and David A. Roberson. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

J. Gilberto Siqueiros and David A. Roberson, “In Situ Wire Drawing of Phosphate Glass in Polymer Matrices for Material Extrusion 3D Printing,” International Journal of Polymer Science, vol. 2017, Article ID 1954903, 14 pages, 2017. doi:10.1155/2017/1954903