Research Article
In Situ Wire Drawing of Phosphate Glass in Polymer Matrices for Material Extrusion 3D Printing
Table 10
Normalization of UTS values for dried PLA printed at 240°C.
| Material | Theoretical density () | Measured density () | ST DEV | % infill | UTS (MPa) measured | ST DEV | UTS (MPa) normalized | ST DEV |
| PLA, dried | 1.3 | 1.2 | 0.0019 | 100% | 56.4 | 2.2 | 56.4 | 2.2 | PLA, P-glass 10%, dried | 1.5 | 1.3 | 0.0023 | 86% | 58 | 1.7 | 67.7 | 2.0 |
|
|