Research Article
In Situ Wire Drawing of Phosphate Glass in Polymer Matrices for Material Extrusion 3D Printing
Table 6
Normalized UTS data for the ABS:SEBS-g-MA system.
| Material | Theoretical density () | Measured density () | ST DEV | % infill | UTS (MPa) measured | ST DEV | UTS (MPa) normalized | ST DEV |
| ABS:SEBS-g-MA, baseline | 0.98 | 0.96 | 0.0023 | 98% | 14.4 | 0.2 | 14.7 | 0.2 | ABS:SEBS-g-MA, P-glass 5% | 1.11 | 0.98 | 0.0064 | 88% | 14.8 | 0.2 | 16.8 | 0.3 | ABS:SEBS-g-MA, P-glass 10% | 1.25 | 0.99 | 0.0058 | 79% | 14.1 | 1.3 | 17.8 | 1.6 | ABS:SEBS-g-MA, P-glass 20% | 1.51 | 0.94 | 0.0041 | 62% | 11 | 0.5 | 17.8 | 0.9 |
|
|