Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017, Article ID 4183686, 9 pages
https://doi.org/10.1155/2017/4183686
Research Article

Mechanical Property Analysis of Circular Polymer Membrane under Uniform Pressure

School of Mechanical Engineering, Hebei University of Technology, Tianjin 300130, China

Correspondence should be addressed to Sang Jianbing; moc.621@gnibnaijgnas

Received 15 May 2017; Revised 23 June 2017; Accepted 3 July 2017; Published 28 August 2017

Academic Editor: Angel Concheiro

Copyright © 2017 Sang Jianbing et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Sakamoto, M. C. Natori, S. Kadonishi et al., “Folding patterns of planar gossamer space structures consisting of membranes and booms,” Acta Astronautica, vol. 94, pp. 34–41, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. A. E. Green and J. E. Adkins, Large Elastic Deformations, and Non-Linear Continuum Mechanics, Clarendon Press, Oxfordm, UK, 1960. View at MathSciNet
  3. A. Patil and A. DasGupta, “Constrained inflation of a stretched hyperelastic membrane inside an elastic cone,” Meccanica. International Journal of Theoretical and Applied Mechanics, vol. 50, no. 6, pp. 1495–1508, 2015. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  4. G. Tamadapu and A. DasGupta, “Finite inflation analysis of a hyperelastic toroidal membrane of initially circular cross-section,” International Journal of Non-Linear Mechanics, vol. 49, pp. 31–39, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Tamadapu and A. Dasgupta, “Finite inflation of a hyperelastic toroidal membrane over a cylindrical rim,” International Journal of Solids and Structures, vol. 51, no. 2, pp. 430–439, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. D. J. Bang and E. Madenci, “Peridynamic modeling of hyperelastic membrane deformation,” Journal of Engineering Materials and Technology, Transactions of the ASME, vol. 139, no. 3, Article ID 031007, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. L. Meunier, G. Chagnon, D. Favier et al., “Anisotropic large deformation of geometrically architectured unfilled silicone membranes,” European Journal of Mechanics. A. Solids, vol. 50, pp. 87–99, 2015. View at Publisher · View at Google Scholar · View at MathSciNet
  8. S. Macleod and N. R. Bartlett, “Experimental and numerical investigation of instructions for hyperelastic membrane inflation using fluid structure coupling,” Computer Modeling in Engineering & Sciences, vol. 77, no. 3, pp. 183–200, 2011. View at Google Scholar
  9. U. K. Chakravarty and R. Albertani, “Experimental and finite element modal analysis of a pliant elastic membrane for micro air vehicles applications,” Journal of Applied Mechanics, Transactions ASME, vol. 79, no. 2, Article ID 021004, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Zahedmanesh, D. John Kelly, and C. Lally, “Simulation of a balloon expandable stentin a realistic coronary artery-determination of the optimum modellingstrategy,” Journal of Biomechanics, vol. 43, no. 11, pp. 2126–2132, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Mooney, “A theory of large elastic deformation,” Journal of Applied Physics, vol. 11, no. 9, pp. 582–592, 1940. View at Publisher · View at Google Scholar · View at Scopus
  12. R. S. Rivlin, “Large elastic deformations of isotropic materials. I. fundamental concepts,” Philosophical Transactions of the Royal Society of London. Series A. Mathematical and Physical Sciences, vol. 240, pp. 459–490, 1948. View at Publisher · View at Google Scholar · View at MathSciNet
  13. L. R. G. Treloar, “The elasticity of a network of long-chain molecules,” Transactions of the Faraday Society, vol. 42, pp. 83–94, 1946. View at Publisher · View at Google Scholar · View at Scopus
  14. R. W. Ogden, “Large deformation isotropic elasticity—on the correlation of theory and experiment for the incompressible rubber-like solids,” Proceedings of the Royal Society of London A: Mathematical A, vol. 326, no. 1567, pp. 565–584, 1972. View at Publisher · View at Google Scholar
  15. R. W. Ogden, “Large deformation isotropic elasticity—on the correlation of theory and experiment for the compressible rubber-like solids,” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 328, no. 1575, pp. 567–583, 1972. View at Publisher · View at Google Scholar
  16. A. N. A. Gent, “A new constitutive ralation for rubber,” Rubber Chemistry Technology, vol. 69, no. 1, pp. 59–61, 1996. View at Publisher · View at Google Scholar
  17. Y. C. Gao, “Large deformation field near a crack tip in rubber-like materials,” Theoretical and Applied Fracture Mechanics, vol. 26, no. 3, pp. 155–162, 1997. View at Publisher · View at Google Scholar · View at Scopus
  18. J. B. Sang, L. F. Sun, and S. F. Xing, “Mechanical properties of polymer rubber materials based on a new constitutive model,” Polymer & Polymer Composite, vol. 22, no. 8, pp. 693–698, 2014. View at Google Scholar