Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2017, Article ID 4262703, 8 pages
https://doi.org/10.1155/2017/4262703
Research Article

Combined Effects of Curing Temperatures and Alkaline Concrete on Tensile Properties of GFRP Bars

1School of Transportation, Wuhan University of Technology, Wuhan 430063, China
2Department of Road and Material, Jiangxi Transportation Institute, Nanchang 330025, China

Correspondence should be addressed to Xiong-jun He; moc.361@tuhwjxh

Received 13 October 2016; Revised 29 November 2016; Accepted 20 December 2016; Published 19 January 2017

Academic Editor: Ulrich Maschke

Copyright © 2017 Wen-rui Yang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Benmokrane, P. Wang, T. M. Ton-That, H. Rahman, and J.-F. Robert, “Durability of glass fiber-reinforced polymer reinforcing bars in concrete environment,” Journal of Composites for Construction, vol. 6, no. 3, pp. 143–153, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. Q. Khan, M. Sheikh, and M. Hadi, “Axial-flexural interactions of GFRP-CFFT columns with and without reinforcing GFRP bars,” Journal of Composites for Construction, 2016. View at Publisher · View at Google Scholar
  3. Hughes Brothers, Glass Fiber Reinforced Polymer (GFRP) Rebar—Aslan™ 100 Series FIBERGLASS REBAR, Hughes Brothers, Seward, Neb, USA, 2011, http://www.aslanfrp.com.
  4. W. Wang, Experimental and Theoretical Studies on Durability of GFRP Rebars Exposed to Alkaline Environment, Tongji University, 2011, (Chinese).
  5. W. R. Yang, X. J. He, and L. Dai, “Damage behaviour of concrete beams reinforced with GFRP bars,” Composite Structures, vol. 161, pp. 173–186, 2017. View at Publisher · View at Google Scholar
  6. X. J. He, J. N. Yang, and C. E. Bakis, “Tensile strength characteristics of GFRP bars in concrete beams with work cracks under sustained loading and severe environments,” Journal of Wuhan University of Technology-Materials Science Edition, vol. 28, no. 5, pp. 934–937, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. W. R. Yang, X. J. He, and L. Dai, “Shear performance of GFRP bars embedded in concrete beams with crack in different environments,” in Proceedings of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12 '15), Nanjing, China, December 2015.
  8. W. R. Yang, X. J. He, L. Dai, X. Zhao, and F. Shen, “Fracture performance of GFRP bars embedded in concrete beams with cracks in an alkaline environment,” Journal of Composites for Construction, vol. 20, no. 6, Article ID 04016040, 2016. View at Publisher · View at Google Scholar
  9. A. Katz and N. Berman, “Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete,” Cement and Concrete Composites, vol. 22, no. 6, pp. 433–443, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Abbasi and P. J. Hogg, “Temperature and environmental effects on glass fibre rebar: modulus, strength and interfacial bond strength with concrete,” Composites Part B: Engineering, vol. 36, no. 5, pp. 394–404, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. K. O. Kjellsen, R. J. Detwiler, and O. E. Gjørv, “Development of microstructures in plain cement pastes hydrated at different temperatures,” Cement and Concrete Research, vol. 21, no. 1, pp. 179–189, 1991. View at Publisher · View at Google Scholar · View at Scopus
  12. G. M. Campbell and R. J. Detwiler, “Development of mix designs for strength and durability of steam-cured concrete,” Concrete International, vol. 15, no. 7, pp. 37–39, 1993. View at Google Scholar · View at Scopus
  13. H. H. Patel, C. H. Bland, and A. B. Poole, “The microstructure of concrete cured at elevated temperatures,” Cement and Concrete Research, vol. 25, no. 3, pp. 485–490, 1995. View at Publisher · View at Google Scholar · View at Scopus
  14. M.-F. Ba, C.-X. Qian, X.-J. Guo, and X.-Y. Han, “Effects of steam curing on strength and porous structure of concrete with low water/binder ratio,” Construction and Building Materials, vol. 25, no. 1, pp. 123–128, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. M. He, Heat Damage Effects of Steam on Concrete and Corresponding Improvement Measures, Central South University, 2012 (Chinese).
  16. C. Sun, W. H. Qiu, X. B. Zeng et al., “Contrast research on mechanical properties experimental of GFRP bars for a long time under different environmental conditions,” Fiber Reinforced Plastics/Composites, no. 8, pp. 88–91, 2014 (Chinese). View at Google Scholar
  17. V. Dejke, Durability of FRP Reinforcement in Concrete, Chalmers University of Technology, Gothenburg, Sweden, 2001.
  18. ACI, “Guide for the design and construction of structural concrete reinforced with fiber-reinforced polymer (FRP) bars,” ACI 440.1R-15, American Concrete Institute, Farmington Hills, Mich, USA, 2015. View at Google Scholar
  19. JGJ55-2011, Concrete Mix Design Procedures, China Building Industry Press, Beijing, China, 2011.
  20. China Building Industry Press, “Ordinary concrete mechanics performance test method standard,” Tech. Rep. GB/T50081-2002, China Building Industry Press, 2003. View at Google Scholar
  21. TB10752-2010, High Speed Railway Bridge Engineering Construction Quality Acceptance Standards, China Railway Press, Beijing, China, 2011.
  22. ACI 440.3R-04, Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures, American Concrete Institute Farmington Hills, Farmington Hills, Mich, USA, 2004.
  23. J. M. Sousa, J. R. Correia, S. Cabral-Fonseca, and A. C. Diogo, “Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications,” Composite Structures, vol. 116, no. 1, pp. 720–731, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Robert and B. Benmokrane, “Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars,” Construction and Building Materials, vol. 38, no. 1, pp. 274–284, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Mufti, M. Onofrei, B. Benmokrane et al., “Durability of GFRP reinforced concrete in field structures,” ACl Stucture Journal, vol. 230, pp. 1361–1378, 2005. View at Google Scholar