Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2018, Article ID 3120545, 11 pages
https://doi.org/10.1155/2018/3120545
Research Article

Bond Behavior of Wet-Bonded Carbon Fiber-Reinforced Polymer-Concrete Interface Subjected to Moisture

School of Civil Engineering, Wuhan University, Wuhan 430072, China

Correspondence should be addressed to Shan Li; nc.ude.uhw@nahsil

Received 10 October 2017; Revised 9 January 2018; Accepted 13 February 2018; Published 14 March 2018

Academic Editor: Young Hoon Kim

Copyright © 2018 Yiyan Lu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. C. Hollaway, “A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties,” Construction and Building Materials, vol. 24, no. 12, pp. 2419–2445, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. W. Zhou, Y. F. Wu, J. G. Teng, and A. Y. T. Leung, “Parametric space for the optimal design of compression-yielding FRP-reinforced concrete beams,” Materials and Structures/Materiaux et Constructions, vol. 43, no. 1-2, pp. 81–97, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. J.-G. Dai, Y.-L. Bai, and J. G. Teng, “Behavior and modeling of concrete confined with FRP composites of large deformability,” Journal of Composites for Construction, vol. 15, no. 6, pp. 963–973, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. W.-W. Wang, J.-G. Dai, and K. A. Harries, “Performance evaluation of RC beams strengthened with an externally bonded FRP system under simulated vehicle loads,” Journal of Bridge Engineering, vol. 18, no. 1, pp. 76–82, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. J. G. Teng, J. F. Chen, S. T. Smith, and L. Lam, FRP strengthened RC structures, Wiley, Chichester, UK, 2002.
  6. Y. J. Kim, C. Shi, and M. F. Green, “Ductility and cracking behavior of prestressed concrete beams strengthened with prestressed CFRP sheets,” Journal of Composites for Construction, vol. 12, no. 3, pp. 274–283, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Li, T. Zhu, Y. Lu, and X. Li, “Effect of Temperature Variation on Bond Characteristics between CFRP and Steel Plate,” International Journal of Polymer Science, vol. 2016, Article ID 5674572, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. Y.-W. Zhou, Y.-F. Wu, and Y. Yun, “Analytical modeling of the bond-slip relationship at FRP-concrete interfaces for adhesively-bonded joints,” Composites Part B: Engineering, vol. 41, no. 6, pp. 423–433, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Y. Lu, W. J. Li, S. Li, X. Li, and T. Zhu, “Study of the tensile properties of CFRP strengthened steel plates,” Polymer, vol. 7, no. 12, pp. 2595–2610, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Tatar and H. R. Hamilton, “Bond durability factor for externally bonded CFRP systems in concrete structures,” Journal of Composites for Construction, vol. 20, no. 1, Article ID 04015027, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. M. I. Kabir, B. Samali, and R. Shrestha, “Fracture Properties of CFRP-Concrete Bond Subjected to Three Environmental Conditions,” Journal of Composites for Construction, vol. 20, no. 4, Article ID 4016010, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. Z. Y. Ouyang, Durability of bond between FRP and concrete in moist environments: Experimental, numerical and analytical study [Ph.D. thesis], 2007.
  13. J. Zhou and J. P. Lucas, “Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxy,” Polymer Journal, vol. 40, no. 20, pp. 5505–5512, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Tatar and H. R. Hamilton, “Effect of moisture exposure on the adhesive bond under direct shear,” in Proceedings of the Proc. 7th Int. Conf. on FRP Composites in Civil Engineering (CICE 2014, International Institute for FRP in Construction (IIFC, Vancouver, Canada, 2014.
  15. S. Choi, A. L. Gartner, N. V. Etten, H. R. Hamilton, and E. P. Douglas, “Durability of concrete beams externally reinforced with CFRP composites exposed to various environments,” Journal of Composites for Construction, vol. 16, no. 1, pp. 10–20, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Tuakta and O. Büyüköztürk, “Conceptual model for prediction of FRP-concrete bond strength under moisture cycles,” Journal of Composites for Construction, vol. 15, no. 5, pp. 743–756, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. B. L. Wan, M. F. Petrou, and K. A. Harries, “The effect of the presence of water on the durability of bond between CFRP and concrete,” Journal of Reinforced Plastics and Composites, vol. 25, no. 8, pp. 875–890, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. J. G. Dai, H. Yokota, M. Iwanami, and E. Kato, “Experimental investigation of the influence of moisture on the bond behavior of FRP to concrete interfaces,” Journal of Composites for Construction, vol. 14, no. 6, pp. 834–844, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Richardson, “Strengthening Damaged Reinforced Concrete Beams and Slender Columns Using Ultra-High Modulus CFRP Plates [M.S. Thesis],” Tech. Rep., 2013. View at Google Scholar
  20. P. Sadeghian and A. Fam, “Strengthening slender reinforced concrete columns using high-modulus bonded longitudinal reinforcement for buckling control,” Journal of Structural Engineering (United States), vol. 141, no. 4, Article ID 04014127, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. C. Au and O. Büyüköztürk, “Peel and shear fracture characterization of debonding in FRP plated concrete affected by moisture,” Journal of Composites for Construction, vol. 10, no. 1, pp. 35–47, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Gamage, R. Al-Mahaidi, and B. Wong, “Fe modelling of CFRP-concrete interface subjected to cyclic temperature, humidity and mechanical stress,” Composite Structures, vol. 92, no. 4, pp. 826–834, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. Codes for design of concrete structures, The Standardization Institute of Chinese Construction, China Planning Press, Beijing, China, 2010, GB 50010-2010.
  24. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM, West Conshohocken, PA, USA, 2008, ASTM D3039-07.
  25. Y. Pan, G. Xian, and M. A. G. Silva, “Effects of water immersion on the bond behavior between CFRP plates and concrete substrate,” Construction and Building Materials, vol. 101, pp. 326–337, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Benzarti, S. Chataigner, M. Quiertant, C. Marty, and C. Aubagnac, “Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays,” Construction and Building Materials, vol. 25, no. 2, pp. 523–538, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. E. H. Immergut and H. F. Mark, “Principles of plasticization,” in Plasticization and plasticizer processes, N. A. J. Platzer, Ed., vol. 48 of Advances in Chemistry, pp. 1–26, American Chemical Society, Washington DC., USA, 1965. View at Publisher · View at Google Scholar
  28. J. Shrestha, T. Ueda, and D. Zhang, “Durability of FRP concrete bonds and its constituent properties under the influence of moisture conditions,” Journal of Materials in Civil Engineering, vol. 27, no. 2, Article ID A4014009, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Shrestha, D. Zhang, and T. Ueda, “Durability performances of carbon fiber–reinforced polymer and concrete-bonded systems under moisture conditions,” Journal of Composites for Construction, vol. 20, no. 5, Article ID 04016023, 2016. View at Publisher · View at Google Scholar
  30. H. Saadatmanesh, M. Tavakkolizadeh, and D. Mostofinejad, “Environmental effects on mechanical properties of wet lay-up fiber-reinforced polymer,” ACI Materials Journal, vol. 107, no. 3, pp. 267–274, 2010. View at Google Scholar · View at Scopus
  31. S. Li, J. Hu, and H. Ren, “The combined effects of environmental conditioning and sustained load on mechanical properties of wet lay-up fiber reinforced polymer,” Polymer, vol. 9, no. 7, article no. 244, 2017. View at Publisher · View at Google Scholar · View at Scopus
  32. J. G. Dai, T. Ueda, and Y. Sato, “Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method,” Journal of Composites for Construction, vol. 9, no. 1, pp. 52–62, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Dai, T. Ueda, and Y. Sato, “Unified analytical approaches for determining shear bond characteristics of FRP-concrete interfaces through pullout tests,” Journal of Advanced Concrete Technology, vol. 4, no. 1, pp. 133–145, 2006. View at Publisher · View at Google Scholar · View at Scopus