Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2018, Article ID 3503415, 18 pages
https://doi.org/10.1155/2018/3503415
Research Article

Experimental Study on Unconfined Compressive Strength of Organic Polymer Reinforced Sand

1School of Earth Sciences and Engineering, Hohai University, Nanjing 210098, China
2CSIR-Central Building Research Institute (CBRI), Roorkee 247667, India

Correspondence should be addressed to Jin Liu; moc.361@029uilnij

Received 12 July 2017; Accepted 8 February 2018; Published 8 March 2018

Academic Editor: Marta Fernández-García

Copyright © 2018 Jin Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Cepuritis and E. Mørtsel, “Possibilities of improving crushed sand performance in fresh concrete by washing: a case study,” Materials and Structures, vol. 49, no. 12, pp. 1–16, 2016. View at Google Scholar
  2. Z. W. S. Abbawi, “Studying strength and stiffness characteristics of sand stabilized with cement and lime additives,” Engineering & Technology Journal, vol. 33, no. 8, pp. 1857–1875, 2015. View at Google Scholar
  3. C. Kim, J. Lee, and S. Lee, “TiO2 nanoparticle sorption to sand in the presence of natural organic matter,” Environmental Earth Sciences, vol. 73, no. 9, pp. 5585–5591, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. I. Chang and G.-C. Cho, “Strengthening of Korean residual soil with β-1,3/1,6-glucan biopolymer,” Construction and Building Materials, vol. 30, pp. 30–35, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. M. Joel and I. O. Agbede, “Mechanical-cement stabilization of laterite for use as flexible pavement material,” Journal of Materials in Civil Engineering, vol. 23, no. 2, pp. 146–152, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. K. Tabata, M. Kajiyama, T. Hiraishi, H. Abe, I. Yamato, and Y. Doi, “Purification and characterization of poly(aspartic acid) hydrolase from Sphingomonas sp. KT-1,” Biomacromolecules, vol. 2, no. 4, pp. 1155–1160, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. S. M. Lahalih and N. Ahmed, “Effect of new soil stabilizers on the compressive strength of dune sand,” Construction and Building Materials, vol. 12, no. 6-7, pp. 321–328, 1998. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Li, J. Cui, T. Zhang, T. Okuro, and S. Drake, “Effectiveness of sand-fixing measures on desert land restoration in Kerqin Sandy Land, northern China,” Ecological Engineering, vol. 35, no. 1, pp. 118–127, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. F. Mousavi, E. Abdi, and H. Rahimi, “Effect of polymer stabilizer on swelling potential and CBR of forest road material,” KSCE Journal of Civil Engineering, vol. 18, no. 7, pp. 2064–2071, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. A. K. Shrivastava, D. Jain, and S. Vishwakarma, “Frictional resistance of drilling fluids as a borehole stabilizers,” International Journal of Geo-Engineering, vol. 7, no. 1, 2016. View at Publisher · View at Google Scholar
  11. M. Zhang, H. Guo, T. El-Korchi, G. Zhang, and M. Tao, “Experimental feasibility study of geopolymer as the next-generation soil stabilizer,” Construction and Building Materials, vol. 47, pp. 1468–1478, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Ma, F. Ran, E. Feng, Z. Dong, and Z. Lei, “Effectiveness of an eco-friendly polymer composite sand-fixing agent on sand fixation,” Water, Air, and Soil Pollution, vol. 226, no. 7, pp. 1–12, 2015. View at Google Scholar
  13. M. A. Mohsin and N. F. Attia, “Inverse emulsion polymerization for the synthesis of high molecular weight polyacrylamide and its application as sand stabilizer,” International Journal of Polymer Science, vol. 2015, Article ID 436583, 10 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. S. A. Naeini, B. Naderinia, and E. Izadi, “Unconfined compressive strength of clayey soils stabilized with waterborne polymer,” KSCE Journal of Civil Engineering, vol. 16, no. 6, pp. 943–949, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Onyejekwe and G. S. Ghataora, “Soil stabilization using proprietary liquid chemical stabilizers: sulphonated oil and a polymer,” Bulletin of Engineering Geology and the Environment, vol. 74, no. 2, pp. 651–665, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Yang, F. Wang, L. Fang, and T. Tan, “The effects of aging tests on a novel chemical sand-fixing agent—polyaspartic acid,” Composites Science and Technology, vol. 67, no. 10, pp. 2160–2164, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. S. A. Naeini and M. Ghorbanalizadeh, “Effect of wet and dry conditions on strength of silty sand soils stabilized with epoxy resin polymer,” Journal of Applied Sciences, vol. 10, no. 22, pp. 2839–2846, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. H. H. Sun and E. Y. Lee, “Restoration of eroded coastal sand dunes using plant and soil-conditioner mixture,” International Biodeterioration and Biodegradation, vol. 113, pp. 161–168, 2016. View at Google Scholar
  19. N. Latifi, S. Horpibulsuk, C. L. Meehan, M. Z. A. Majid, and A. S. A. Rashid, “Xanthan gum biopolymer: an eco-friendly additive for stabilization of tropical organic peat,” Environmental Earth Sciences, vol. 75, no. 9, pp. 1–10, 2016. View at Google Scholar
  20. W. Gong, Y. Zang, B. Liu et al., “Effect of using polymeric materials in ecological sand-fixing of Kerqin Sandy Land of China,” Journal of Applied Polymer Science, vol. 133, no. 43, Article ID 44102, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. S. Rezaeimalek, J. Huang, and S. Bin-Shafique, “Evaluation of curing method and mix design of a moisture activated polymer for sand stabilization,” Construction and Building Materials, vol. 146, pp. 210–220, 2017. View at Publisher · View at Google Scholar · View at Scopus
  22. P. K. Kolay, B. Dhakal, S. Kumar, and V. K. Puri, “Effect of liquid acrylic polymer on geotechnical properties of fine-grained soils,” International Journal of Geosynthetics and Ground Engineering, vol. 2, no. 4, 29 pages, 2016. View at Publisher · View at Google Scholar
  23. C. Buchmann, J. Bentz, and G. E. Schaumann, “Intrinsic and model polymer hydrogel-induced soil structural stability of a silty sand soil as affected by soil moisture dynamics,” Soil & Tillage Research, vol. 154, pp. 22–33, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Liu, B. Shi, Y. Lu et al., “Effectiveness of a new organic polymer sand-fixing agent on sand fixation,” Environmental Earth Sciences, vol. 65, no. 3, pp. 589–595, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. A. Ate, “The effect of polymer-cement stabilization on the unconfined compressive strength of liquefiable soils,” International Journal of Polymer Science, vol. 2013, pp. 155–171, 2013. View at Google Scholar
  26. L. Jin, Q. Xiaohui, Z. Da, F. Qiao, W. Yong, and P. K. Debi, “Study on the permeability characteristics of polyurethane soil stabilizer reinforced sand,” Advances in Materials Science and Engineering, vol. 2017, pp. 1–14, 2017. View at Google Scholar
  27. N. Latifi, A. S. A. Rashid, S. Siddiqua, and S. Horpibulsuk, “Micro-structural analysis of strength development in low- and high swelling clays stabilized with magnesium chloride solution - A green soil stabilizer,” Applied Clay Science, vol. 118, pp. 195–206, 2015. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Zhang, Z. Ren, S. He, Y. Zhu, and C. Zhu, “FTIR spectroscopic characterization of polyurethane-urea model hard segments (PUUMHS) based on three diamine chain extenders,” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, vol. 66, no. 1, pp. 188–193, 2007. View at Publisher · View at Google Scholar · View at Scopus