Research Article
Synthesis and Properties of Bionanocomposites of Polyhydroxybutyrate-Polylactic Acid Doped with Copper and Silver Nanoparticles
Table 3
Injection process parameters.
| | Parameter | Value |
| | Mold temperature (°C) | 80 | | Injection temperature (°C) | 180 | | Injection temperature (s) | 20 | | Postinjection time (s) | 10 | | Preheating time (s) | 180 | | Injection pressure (bar) | 400 | | Postinjection pressure (bar) | 300 |
|
|
