Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2019, Article ID 6178163, 10 pages
https://doi.org/10.1155/2019/6178163
Research Article

Lignosulfonates as Fire Retardants in Wood Flour-Based Particleboards

1Institute for Polymers, Composites and Biomaterials, Via Campi Flegrei 34, Pozzuoli, Naples 80078, Italy
2Tecnalia Research & Innovation, Area Anardi 5, Azpeitia, Guipùzcoa E-20730, Spain
3Institute for Polymers, Composites and Biomaterials (IPCB-CNR), Via Previati 1/E, 23900 Lecco, Italy
4Interdepartmental Research Centre of Nuclear Magnetic Resonance for the Environment, Food Processing and New Materials (CERMANU), Via Università 100, Portici 80055, Italy

Correspondence should be addressed to Stefania Angelini; moc.liamg@inilegnainafets

Received 14 January 2019; Revised 9 May 2019; Accepted 7 June 2019; Published 11 July 2019

Academic Editor: De-Yi Wang

Copyright © 2019 Stefania Angelini et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. Y. Abdelaziz and C. P. Hulteberg, “Physicochemical characterisation of technical lignins for their potential valorisation,” Waste and Biomass Valorization, vol. 8, no. 3, pp. 859–869, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. M. E. Eugenio, J. M. Carbajo, M. C. Terrón, A. E. González, and J. C. Villar, “Bioremediation of lignosulphonates by lignin-degrading basidiomycetous fungi,” Bioresource Technology, vol. 99, no. 11, pp. 4929–4934, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. A. P. Lemes, M. A. Soto-Oviedo, W. R. Waldman, L. H. Innocentini-Mei, and N. Duràn, “Effect of lignosulfonate on the thermal and morphological behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate),” Journal of Polymers and the Environment, vol. 18, no. 3, pp. 250–259, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Matsushita and S. Yasuda, “Preparation and evaluation of lignosulfonates as a dispersant for gypsum paste from acid hydrolysis lignin,” Bioresource Technology, vol. 96, no. 4, pp. 465–470, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. S. A. Gundersen and J. Sjoblom, “High- and low-molecular-weight lignosulfonates and Kraft lignins as oil/water-emulsion stabilizers studied by means of electrical conductivity,” Colloid & Polymer Science, vol. 277, no. 5, pp. 462–468, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Aro and P. Fatehi, “Production and application of lignosulfonates and sulfonated lignin,” ChemSusChem, vol. 10, no. 9, pp. 1861–1877, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. S. G. Santos, A. P. Marques, D. L. D. Lima, D. V. Evtuguin, and V. I. Esteves, “Kinetics of eucalypt lignosulfonate oxidation to aromatic aldehydes by oxygen in alkaline medium,” Industrial and Engineering Chemistry Research, vol. 50, no. 1, pp. 291–298, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. M. B. Hocking, “Vanillin: synthetic flavoring from spent sulfite liquor,” Journal of Chemical Education, vol. 74, no. 9, p. 1055, 1997. View at Publisher · View at Google Scholar
  9. Y. Pan, J. Zhan, H. Pan et al., “Effect of fully biobased coatings constructed via layer-by-layer assembly of chitosan and lignosulfonate on the thermal, flame retardant, and mechanical properties of flexible polyurethane foam,” ACS Sustainable Chemistry & Engineering, vol. 4, no. 3, pp. 1431–1438, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. L. C. Morais, A. A. S. Curvelo, and M. D. Zambon, “Thermoplastic starch–lignosulfonate blends. 1. factorial planning as a tool for elucidating new data from high performance size-exclusion chromatography and mechanical tests,” Carbohydrate Polymers, vol. 62, no. 2, pp. 104–112, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Galán-Marín, C. Rivera-Gómez, and F. Bradley, “Ultrasonic, molecular and mechanical testing diagnostics in natural fibre reinforced, polymer-stabilized earth blocks,” International Journal of Polymer Science, vol. 2013, Article ID 130582, 10 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. K. G. Satyanarayana, G. G. C. Arizaga, and F. Wypych, “Biodegradable composites based on lignocellulosic fibers—An overview,” Progress in Polymer Science, vol. 34, no. 9, pp. 982–1021, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. D. Y. Wang, E. Naderi Kalali, and J. Croyal, “Fire retardant wood polymer composites: preparation, flammability, mechanical properties,” in Proceedings of the 1st European Workshop Fire Safety of Green Buildings, pp. 33–35, Berlin, Germany, 2015.
  14. L. V. P. Pin, Z. Wang, K. Hu, and W. Fan, “Flammability and thermal degradation of flame retarded polypropylene composites containing melamine phosphate and pentaerythritol derivatives,” Polymer Degradation and Stability, vol. 90, no. 3, pp. 523–534, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. X. Chen, Y. Jiang, and C. Jiao, “Smoke suppression properties of ferrite yellow on flame retardant thermoplastic polyurethane based on ammonium polyphosphate,” Journal of Hazardous Materials, vol. 266, pp. 114–121, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. D. C. O. Marney, L. J. Russell, and R. Mann, “Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative,” Fire and Materials, vol. 32, no. 6, pp. 357–370, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. R. H. White, “Oxygen index evaluation of fire-retardant-treated wood,” Wood Science, vol. 12, pp. 113–121, 1979. View at Google Scholar
  18. R. Hashim, O. Sulaiman, R. N. Kumar, P. F. Tamyez, R. J. Murphy, and Z. Ali, “Physical and mechanical properties of flame retardant urea formaldehyde medium density fiberboard,” Journal of Materials Processing Technology, vol. 209, no. 2, pp. 635–640, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. O. Grexa, F. Poutch, D. Manikova, H. Martvonova, and A. Bartekova, “Intumescence in fire retardancy of lignocellulosic panels,” Polymer Degradation and Stability, vol. 82, no. 2, pp. 373–377, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. Z. A. Nagieb, M. A. Nassar, and M. G. el-Meligy, “Effect of addition of boric acid and borax on fire-retardant and mechanical properties of urea formaldehyde saw dust composites,” International Journal of Carbohydrate Chemistry, vol. 2011, Article ID 146763, 6 pages, 2011. View at Publisher · View at Google Scholar
  21. G. Liu, W. Chen, and J. Yu, “A novel process to prepare ammonium polyphosphate with crystalline form ii and its comparison with melamine polyphosphate,” Industrial and Engineering Chemistry Research, vol. 49, no. 23, pp. 12148–12155, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. C. Reti, M. Casetta, S. Duquesne, S. Bourbigot, and R. Delobel, “Flammability properties of intumescent pla including starch and lignin,” Polymers for Advanced Technologies, vol. 19, no. 6, pp. 628–635, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Costes, F. Laoutid, M. Aguedo et al., “Phosphorus and nitrogen derivatization as efficient route for improvement of lignin flame retardant action in PLA,” European Polymer Journal, vol. 84, pp. 652–667, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. L. Ferry, G. Dorez, A. Taguet, B. Otazaghine, and J. M. Lopez-Cuesta, “Chemical modification of lignin by phosphorus molecules to improve the fire behavior of polybutylene succinate,” Polymer Degradation and Stability, vol. 113, pp. 135–143, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. L. Liu, M. Qian, P.’. Song, G. Huang, Y. Yu, and S. Fu, “Fabrication of green lignin-based flame retardants for enhancing the thermal and fire retardancy properties of polypropylene/wood composites,” ACS Sustainable Chemistry & Engineering, vol. 4, no. 4, pp. 2422–2431, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. 2018, https://www.alibaba.com/product-detail/calcium-lignosulfonate-powder_62035133245.html?spm=a2700.7724838.2017115.50.2dd8752bWG3JOB&s=phttps://www.alibaba.comhttps://www.alibaba.com/product-detail/retardant-ammonium-polyphosphate_60613838038.html?spm=a2700.7724838.2017115.107.790142b2LXvnaJ.
  27. B. Li, X. Zhang, and R. Su, “An investigation of thermal degradation and charring of larch lignin in the condensed phase: the effects of boric acid, guanyl urea phosphate, ammonium dihydrogen phosphate and ammonium polyphosphate,” Polymer Degradation and Stability, vol. 75, no. 1, pp. 35–44, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. H. Struszczyk, “Modification of Lignins. III. Reaction of Lignosulfonates with Chlorophosphazenes,” Journal of Macromolecular Science: Part A - Chemistry, vol. 23, no. 8, pp. 973–992, 1986. View at Publisher · View at Google Scholar · View at Scopus
  29. Y. Yu, S. Fu, P.’. Song et al., “Functionalized lignin by grafting phosphorus-nitrogen improves the thermal stability and flame retardancy of polypropylene,” Polymer Degradation and Stability, vol. 97, no. 4, pp. 541–546, 2012. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Liu, G. Huang, P. Song, Y. Yu, and S. Fu, “Converting industrial alkali lignin to biobased functional additives for improving fire behavior and smoke suppression of polybutylene succinate,” ACS Sustainable Chemistry & Engineering, vol. 4, no. 9, pp. 4732–4742, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. L. Verdolotti, M. Oliviero, M. Lavorgna et al., “On revealing the effect of alkaline lignin and ammonium polyphosphate additives on fire retardant properties of sustainable zein-based composites,” Polymer Degradation and Stability, vol. 134, pp. 115–125, 2016. View at Publisher · View at Google Scholar · View at Scopus
  32. A. Sluiter, B. Hames, R. Ruiz et al., Determination of structural carbohydrates and lignin in biomass, Laboratory Analytical Procedure, 2008, http://www.nrel.gov/biomass/analyticalprocedures.html.
  33. Z. Luo, S. Wang, and X. Guo, “Selective pyrolysis of Organosolv lignin over zeolites with product analysis by TG-FTIR,” Journal of Analytical and Applied Pyrolysis, vol. 95, pp. 112–117, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. V. S. Ramachandran and R. F. Feldman, “Adsorption of calcium lignosulfonate on tricalcium aluminate and its hydrates in a non-aqueous medium,” Cement Technology, vol. 2, no. 4, pp. 121–129, 1971. View at Google Scholar
  35. A. Duval and M. Lawoko, “A review on lignin-based polymeric, micro- and nano-structured materials,” Reactive & Functional Polymers, vol. 85, pp. 78–96, 2014. View at Publisher · View at Google Scholar · View at Scopus
  36. S. Angelini, D. Ingles, M. Gelosia et al., “One-pot lignin extraction and modification in γ-valerolactone from steam explosion pre-treated lignocellulosic biomass,” Journal of Cleaner Production, vol. 151, pp. 152–162, 2017. View at Publisher · View at Google Scholar · View at Scopus
  37. N.-E. El Mansouri and J. Salvadó, “Structural characterization of technical lignins for the production of adhesives: Application to lignosulfonate, kraft, soda-anthraquinone, organosolv and ethanol process lignins,” Industrial Crops and Products, vol. 24, no. 1, pp. 8–16, 2006. View at Publisher · View at Google Scholar · View at Scopus
  38. M. V. Alonso, J. J. Rodríguez, M. Oliet, F. Rodríguez, J. Garcia, and M. A. Gilarranz, “Characterization and structural modification of ammonic lignosulfonate by methylolation,” Journal of Applied Polymer Science, vol. 82, no. 11, pp. 2661–2668, 2001. View at Publisher · View at Google Scholar · View at Scopus
  39. A. M. Ferreira, J. Pereira, M. Almeida et al., “Effect of spent sulfite liquor on urea-formaldehyde resin performance,” Journal of Applied Polymer Science, vol. 136, no. 17, 2019. View at Publisher · View at Google Scholar · View at Scopus
  40. Y. Xiang, X. Ru, J. Shi et al., “Granular, slow-release fertilizer from urea-formaldehyde, ammonium polyphosphate, and amorphous silica gel: a new strategy using cold extrusion,” Journal of Agricultural and Food Chemistry, vol. 66, no. 29, pp. 7606–7615, 2018. View at Publisher · View at Google Scholar · View at Scopus
  41. B. Cao, X. Gu, X. Song et al., “The flammability of expandable polystyrene foams coated with melamine modified urea formaldehyde resin,” Journal of Applied Polymer Science, vol. 134, no. 5, article 44423, 2017. View at Publisher · View at Google Scholar · View at Scopus
  42. J. Zhou, L. Yang, X. Wang, Q. Fu, Q. Sun, and Z. Zhang, “Microencapsulation of APP-I and influence of microencapsulated APP-I on microstructure and flame retardancy of PP/APP-I/PER composites,” Applied Polymer Science, vol. 129, no. 1, pp. 36–46, 2013. View at Publisher · View at Google Scholar · View at Scopus
  43. V. Babrauskas, Fire and Materials, vol. 19, no. 6, pp. 243–252, 1995. View at Publisher · View at Google Scholar · View at Scopus
  44. B. A. L. Ostman, Heat Release in Fires, V. Babrauskas and S. J. Grayson, Eds., Chapman & Hall, London, UK, 1995.
  45. P. Rybiński, B. Syrek, M. Masłowski et al., “Influence of lignocellulose fillers on properties natural rubber composites,” Journal of Polymers and the Environment, vol. 26, no. 6, pp. 2489–2501, 2018. View at Publisher · View at Google Scholar · View at Scopus