Table of Contents Author Guidelines Submit a Manuscript
International Journal of Polymer Science
Volume 2019, Article ID 8402518, 15 pages
https://doi.org/10.1155/2019/8402518
Research Article

Predictable Behavior of GFRP-Reinforced Bridge Decks: Formulation of a Strain-Based Capacity Model

1Civil and Environmental Engineering, The University of Louisville, Louisville, Kentucky, USA
2Civil Engineering and Construction Management, California Baptist University, Riverside, California, USA
3Civil Engineering, The University of Texas at Arlington, Texas, USA

Correspondence should be addressed to Young Hoon Kim; ude.ellivsiuol@500mikhy

Received 30 August 2018; Revised 6 February 2019; Accepted 3 April 2019; Published 15 May 2019

Academic Editor: Ulrich Maschke

Copyright © 2019 Young Hoon Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. AASHTO, AASHTO LRFD Bridge Design Guide Specifications for GFRP-Reinforced Concrete Bridge Decks and Traffic Railings, p. 68, 2009.
  2. AASHTO, AASHTO LRFD Bridge Design Specification, Interim Revision, Washington, DC, 5th edition, 2010.
  3. CSA, Canadian Highway Bridge Design Code. CSA Standard CAN/CSA-S6-06, Canadian Standards Association, 2006.
  4. ACI Committee 440, Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, 2006.
  5. ACI Committee 440, Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures, 2008.
  6. ACI Committee 440, ACI 440.1R-15 Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars, 2015.
  7. R. V. Rodrigues, A. Muttoni, and M. F. Ruiz, “Influence of shear on rotation capacity of reinforced concrete members without shear reinforcement,” ACI Structural Journal, vol. 107, no. 5, pp. 516–525, 2010. View at Publisher · View at Google Scholar
  8. A. Muttoni and M. Fernandez Ruiz, “Shear strength of members without transverse reinforcement as function of critical shear crack width,” ACI Structural Journal, vol. 105, no. 2, pp. 163–172, 2008. View at Publisher · View at Google Scholar
  9. B. Hu and Y.-F. Wu, “Effect of shear span-to-depth ratio on shear strength components of RC beams,” Engineering Structures, vol. 168, pp. 770–783, 2018. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Hu and Y.-F. Wu, “Quantification of shear cracking in reinforced concrete beams,” Engineering Structures, vol. 147, pp. 666–678, 2017. View at Publisher · View at Google Scholar · View at Scopus
  11. Y.-F. Wu and B. Hu, “Shear strength components in reinforced concrete members,” Journal of Structural Engineering, vol. 143, no. 9, article 4017092, 2017. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Zhou, M. Guo, L. Sui et al., “Shear strength components of adjustable hybrid bonded CFRP shear-strengthened RC beams,” Composites Part B: Engineering, vol. 163, pp. 36–51, 2019. View at Publisher · View at Google Scholar · View at Scopus
  13. K.-K. Choi and H.-G. Park, “Unified shear strength model for reinforced concrete beams—part II: verification and simplified method,” ACI Structural Journal, vol. 104, no. 2, pp. 153–161, 2007. View at Publisher · View at Google Scholar
  14. H.-G. Park, S. Kang, and K.-K. Choi, “Analytical model for shear strength of ordinary and prestressed concrete beams,” Engineering Structures, vol. 46, pp. 94–103, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. K.-K. Choi, J.-C. Kim, and H.-G. Park, “Shear strength model of concrete beams based on compression zone failure mechanism,” ACI Structural Journal, vol. 113, no. 5, pp. 1095–1106, 2016. View at Publisher · View at Google Scholar · View at Scopus
  16. K.-K. Choi, W. C. Sim, J. C. Kim, and H. G. Park, “Maximum shear strength of slender RC beams with rectangular cross sections,” Journal of Structural Engineering, vol. 141, no. 7, article 4014184, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. A. K. El-Sayed, E. F. El-Salakawy, and B. Benmokrane, “Shear strength of FRP-reinforced concrete beams without transverse reinforcement,” ACI Structural Journal, vol. 103, no. 2, pp. 235–243, 2006. View at Publisher · View at Google Scholar
  18. A. F. Ashour, “Flexural and shear capacities of concrete beams reinforced with GFRP bars,” Construction and Building Materials, vol. 20, no. 10, pp. 1005–1015, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. R. D. Amico, Shear Strength and Strength Degradation of Concrete Bridge Decks with GFRP Top Mat Reinforcement, in Civil Engineering, Virginia polytechnic institute and State University, 2006.
  20. T. K. Hassan and S. H. Rizjalla, “Punching shear strength of GFRP reinforced deck slabs in slab-girder bridges,” in 4th International Conference on Advanced Composite Materials in Bridges and Structures, Calgary, Alberta, 2004.
  21. A. S. Nowak and M. M. Szerszen, “Calibration of design code for buildings (ACI 318): part 1—statistical models for resistance,” ACI Structural Journal, vol. 100, no. 3, pp. 377–382, 2003. View at Publisher · View at Google Scholar
  22. C. K. Shield, T. V. Galambos, and P. Gulbrandsen, On the History and Reliability of Flexural Strength of FRP Reinforced Concrete Members in ACI 440.1R, R. S. R. Sen, C. Shield, and W. Gold, Eds., American Concrete Institute, Farmington Hills, MI, USA, 2011.
  23. Y. H. Kim, D. Trejo, and P. Gardoni, “Time-variant reliability analysis and flexural design of GFRP-reinforced bridge decks,” Journal of Composites for Construction, vol. 16, no. 4, pp. 359–370, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. M. M. Flint, J. W. Baker, and S. L. Billington, “A modular framework for performance-based durability engineering: from exposure to impacts,” Structural Safety, vol. 50, pp. 78–93, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. F. E. Tannous and H. Saadatmanesh, “Environmental effects on the mechanical properties of E-glass FRP rebars,” ACI Materials Journal, vol. 95, no. 2, pp. 87–100, 1998. View at Publisher · View at Google Scholar
  26. D. Trejo, F. Aguiñiga, R. L. Yuan, R. W. James, and P. B. Keating, Characterization of Design Parameters for Fiber Reinforced Polymer Composite Reinforced Concrete Systems, Tech. Rep. 9-1520-3, Texas Transportation Institute Research Report, 2005.
  27. A. Mukherjee and S. J. Arwikar, “Performance of glass fiber-reinforced polymer reinforcing bars in tropical environments - part I: structural scale tests,” ACI Structural Journal, vol. 102, no. 5, pp. 745–753, 2005. View at Publisher · View at Google Scholar
  28. A. A. Mufti, N. Banthia, B. Benmokrane, M. Boulfiza, and J. P. Newhook, “Durability of GFRP composite rods,” Concrete International, vol. 29, no. 2, pp. 37–42, 2007. View at Google Scholar
  29. A. A. Mufti, M. Onofrei, B. Benmokrane et al., “Field study of glass-fibre-reinforced polymer durability in concrete,” Canadian Journal of Civil Engineering, vol. 34, no. 3, pp. 355–366, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Benmokrane and P. Cousin, University of Sherbrook GFRP Durability Study Report, Intelligent Sensing for Innovative Structures (ISIS), Winnipeg, MB, Canada, 2005.
  31. A. S. M. Kamal and M. Boulfiza, “Durability of GFRP rebars in simulated concrete solutions under accelerated aging conditions,” Journal of Composites for Construction, vol. 15, no. 4, pp. 473–481, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. B. Benmokrane, P. Wang, T. Pavate, and M. Robert, “Durability of FRP composites for civil infrastructure applications,” in Durability of Materials and Structures in Building and Civil Engineering, C. W. Yu and J. W. Bull, Eds., Whittles Publishing, Dunbeath, Scotland, 2006. View at Google Scholar
  33. Y. Park, Y. Kim, and S.-H. Lee, “Long-term flexural behaviors of GFRP reinforced concrete beams exposed to accelerated aging exposure conditions,” Polymers, vol. 6, no. 6, pp. 1773–1793, 2014. View at Publisher · View at Google Scholar · View at Scopus
  34. P. Gardoni, D. Trejo, and Y. H. Kim, “Time-variant strength capacity model for GFRP bars embedded in concrete,” Journal of Engineering Mechanics, vol. 139, no. 10, pp. 1435–1445, 2013. View at Publisher · View at Google Scholar · View at Scopus
  35. P. Gardoni, K. M. Nemati, and T. Noguchi, “Bayesian statistical framework to construct probabilistic models for the elastic modulus of concrete,” Journal of Materials in Civil Engineering, vol. 19, no. 10, pp. 898–905, 2007. View at Publisher · View at Google Scholar · View at Scopus
  36. N. A. Hoult, E. G. Sherwood, E. C. Bentz, and M. P. Collins, “Does the use of FRP reinforcement change the one-way shear behavior of reinforced concrete slabs?” Journal of Composites for Construction, vol. 12, no. 2, pp. 125–133, 2008. View at Publisher · View at Google Scholar · View at Scopus
  37. E. C. Bentz, F. J. Vecchio, and M. Collins, “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements,” ACI Structural Journal, vol. 103, no. 4, pp. 614–624, 2006. View at Publisher · View at Google Scholar
  38. E. A. Ahmed, E. F. el-Salakawy, and B. Benmokrane, “Shear performance of RC bridge girders reinforced with carbon FRP stirrups,” Journal of Bridge Engineering, vol. 15, no. 1, pp. 44–54, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. T. Alkhrdaji, M. A. Wideman, A. Belarbi, and A. Nanni, “Shear strength of GFRP RC beams and slabs,” in Proceedings of CCC 2001, Composites in Construction, J. Figueiras, L. Juvandes, and R. Furia, Eds., pp. 409–414, Porto, Portugal, 2001.
  40. D. H. Deitz, I. E. Harik, and H. Gesund, “One-way slabs reinforced with glass fiber reinforced polymer reinforcing bars,” in Proceedings of 4th International Symposium on Fiber reinforced polymer reinforcement for Rein-forced concrete structures, Baltimore: American Concrete Institute, 1999.
  41. N. Duranovic, K. Pilakoutas, and P. Waldron, “Tests on concrete beams reinfored with glass fiber reinforced plastic bars,” in FRPRCS-3, Japan Concrete Institute, Sapporo, Japan, 1997. View at Google Scholar
  42. A. K. El-Sayed, E. F. El-Salakawy, and B. Benmokrane, “Shear capacity of high-strength concrete beams reinforced with fiber-reinforced polymer bars,” ACI Structural Journal, vol. 103, no. 3, pp. 383–389, 2006. View at Publisher · View at Google Scholar
  43. S. P. Gross, J. R. Yost, D. W. Dinehart, E. Svensen, and N. Liu, “Shear strength of normal and high strength concrete beams reinforced with GFRP bars,” in 4th International Conference on Advanced Composite Materials in Bridges and Structures, ACMBS, 2004.
  44. Y. Mizukawa, Y. Sato, T. Ueda, and Y. Kakuta, “A study on shear fatigue behavior of concrete beams with FRP rods,” in International symposium; 3rd, Non-metallic (FRP) reinforcement for concrete structures, Sapporo, Japan, 1997.
  45. H. Nakamura and T. Higai, “Evaluation of shear strength of concrete beams reinforced with FRP,” Proceedings of the Japan Society of Civil Engineers, vol. 26, pp. 111–123, 1995. View at Google Scholar
  46. A. G. Razaqpur, B. O. Isgor, S. Greenaway, and A. Selley, “Concrete contribution to the shear resistance of fiber reinforced polymer reinforced concrete members,” Journal of Composites for Construction, vol. 8, no. 5, pp. 452–460, 2004. View at Publisher · View at Google Scholar · View at Scopus
  47. R. N. Swamy and M. Aburawi, “Structural implications of using GFRP bars as concrete reinforcement,” in Proceedings of 3rd International Symposium, FRPRCS, Tokyo, Japan, 1997.
  48. M. Tariq and J. Newhook, “Shear testing of FRP reinforced concrete without transverse reinforcement,” in Proceedings of the Annual Conference of the Canadian Society for Civil Engineering, CSCE, Moncton, New Brunswick, Canada, 2003.
  49. A. K. Tureyen and R. J. Frosch, “Shear tests of FRP-reinforced concrete beams without stirrups,” ACI Structural Journal, vol. 99, no. 4, pp. 427–434, 2002. View at Publisher · View at Google Scholar
  50. J. R. Yost, S. P. Gross, and D. W. Dinehart, “Shear strength of normal strength concrete beams reinforced with deformed GFRP bars,” Journal of Composites for Construction, vol. 5, no. 4, pp. 268–275, 2001. View at Publisher · View at Google Scholar · View at Scopus
  51. W. J. Zhao, K. Maruyama, and H. Suzuky, “Shear behavior of concrete beams reinforced by FRP rods as longitudinal and shear reinforcement,” in 2nd International symposium, Non-metallic (FRP) reinforcement for concrete structures, Ghent, Belgium, 1995.
  52. S. Tottori and H. Wakui, “Shear capacity of RC and PC beams using FRP reinforcement,” ACI Special Publication, vol. 138, pp. 615–632, 1993. View at Google Scholar
  53. F. Akgul, Lifetime System Reliability Prediction for Multiple Structure Types in a Bridge Network, University of Colorado at Boulder, Ann Arbor, MI, USA, 2002.
  54. M. P. Enright and D. M. Frangopol, “Probabilistic analysis of resistance degradation of reinforced concrete bridge beams under corrosion,” Engineering Structures, vol. 20, no. 11, pp. 960–971, 1998. View at Publisher · View at Google Scholar · View at Scopus
  55. A. E. Naaman and A. Siriaksorn, “Reliability analysis of partially prestressed beams,” in Proceedings of the Sino-American Symposium on Bridge and Structural Engineering, Beijing, China, 1983.
  56. A. Nowak, E. Szeliga, and M. Szerszen, Reliability-based calibration for structural concrete, phase 3. Serial no. 2849, Portland Cement Association Research and Development, 2008.
  57. M. P. Collins, E. C. Bentz, E. G. Sherwood, and L. Xie, “An adequate theory for the shear strength of reinforced concrete structures,” Magazine of Concrete Research, vol. 60, no. 9, pp. 635–650, 2008. View at Publisher · View at Google Scholar · View at Scopus
  58. P. S. Marsh and D. M. Frangopol, “Reinforced concrete bridge deck reliability model incorporating temporal and spatial variations of probabilistic corrosion rate sensor data,” Reliability Engineering & System Safety, vol. 93, no. 3, pp. 394–409, 2008. View at Publisher · View at Google Scholar · View at Scopus
  59. SHRP 2, Bridges for Service Life Beyond 100 Years: Service Limit State Design, in Strategic Highway Research Program (SHRP) Report S2-R19B-RW-1, Transportation Research Board, 2015.
  60. M. Robert and B. Benmokrane, “Behavior of GFRP reinforcing bars subjected to extreme temperatures,” Journal of Composites for Construction, vol. 14, no. 4, pp. 353–360, 2010. View at Publisher · View at Google Scholar · View at Scopus
  61. A. Nowak and K. Collins, Reliability of Structures, Mcgraw-Hill Companies, Inc, 2000.
  62. AASHTO, Guide Manual for Condition Evaluation and Load and Resistance Factor Rating (LRFR) of Highway Bridges, American Association of Highway and Transportation Officials, Washington, DC, 2003.