Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="7"><hr/></td></tr><tr class="thead"><td class="align_left">Elements</td><td class="align_center">Cu</td><td class="align_center">Al</td><td class="align_center">Mg</td><td class="align_center">Mn</td><td class="align_center">Si</td><td class="align_center">Cr</td></tr><tr><td class="thead-hr" colspan="7"><hr/></td></tr><tr><td class="align_left">Weight%</td><td class="align_center">98.05</td><td class="align_center">0.42</td><td class="align_center">0.29</td><td class="align_center">0.47</td><td class="align_center">0.24</td><td class="align_center">0.24</td></tr><tr class="table-tr"><td colspan="7"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Chemical composition of copper alloy.</div>

International Journal of Polymer Science

tab1

Table 1

Table 1: Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route 