Research Article
Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route
Table 5
Cutting force summary (cutting speed 50 m/min).
| S. no | Depth of cut (mm) | Cutting force (kgf) | 3 wt. % | 6 wt. % | 9 wt. % | 12 wt. % |
| 1 | 0.5 | 2.34 | 2.89 | 3.01 | 3.76 | 2 | 0.8 | 4.56 | 5.32 | 4.56 | 6.37 | 3 | 1.0 | 6.75 | 7.24 | 7.34 | 8.28 | 4 | 1.2 | 8.24 | 9.15 | 10.45 | 10.72 | 5 | 1.4 | 10.23 | 12.34 | 12.78 | 14.89 | 6 | 1.6 | 12.74 | 13.24 | 14.23 | 16.76 |
|
|