Research Article
Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route
Table 6
Cutting force summary (cutting speed 100 m/min).
| S. no | Depth of cut (mm) | Cutting force (kgf) | 3 wt. % | 6 wt. % | 9 wt. % | 12 wt. % |
| 1 | 0.5 | 3.45 | 3.84 | 3.67 | 3.76 | 2 | 0.8 | 6.24 | 5.23 | 6.24 | 7.36 | 3 | 1.0 | 7.23 | 9.15 | 10.21 | 1.24 | 4 | 1.2 | 9.45 | 12.12 | 11.54 | 12.76 | 5 | 1.4 | 12.62 | 14.67 | 16.92 | 15.43 | 6 | 1.6 | 14.67 | 18.23 | 19.84 | 17.98 |
|
|