Research Article
Study on Compaction and Machinability of Silicon Nitride (Si3N4) Reinforced Copper Alloy Composite through P/M Route
Table 7
Cutting force summary (cutting speed 150 m/min).
| S. no | Depth of cut (mm) | Cutting force (kgf) | 3 wt. % | 6 wt. % | 9 wt. % | 12 wt. % |
| 1 | 0.5 | 1.89 | 2.37 | 3.01 | 2.56 | 2 | 0.8 | 3.65 | 4.62 | 4.52 | 5.34 | 3 | 1.0 | 7.23 | 8.34 | 8.24 | 9.37 | 4 | 1.2 | 8.24 | 11.24 | 10.34 | 12.76 | 5 | 1.4 | 10.29 | 13.47 | 14.78 | 13.27 | 6 | 1.6 | 13.64 | 17.23 | 16.34 | 15.49 |
|
|