Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2006 (2006), Article ID 13807, 9 pages
http://dx.doi.org/10.1155/IJRM/2006/13807

Vibration and Dynamic Response Control of Nonuniform Composite Rotating Blades

1Department of Mechanical Engineering, Korea University, Seoul 136-701, Korea
2Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061-0219, USA
3R & D Division of Hyundai-Kia Motors, 772-1, Jangduk-Dong, Hwaseong-Si, Gyeonggi-Do 445-706, Korea

Received 9 August 2005; Accepted 2 September 2005

Copyright © 2006 Sungsoo Na et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. O. Song and L. Librescu, “Free vibration of anisotropic composite thin-walled beams of closed cross-section contour,” Journal of Sound and Vibration, vol. 167, no. 1, pp. 129–147, 1993. View at Google Scholar
  2. O. Song and L. Librescu, “Structural modeling and free vibration analysis of rotating composite thin-walled beams,” Journal of the American Helicopter Society, vol. 42, no. 4, pp. 358–369, 1997. View at Google Scholar
  3. O. Song, L. Librescu, and S.-Y. Oh, “Vibration of pretwisted adaptive rotating blades modeled as anisotropic thin-walled beams,” AIAA Journal, vol. 39, no. 2, pp. 285–295, 2001. View at Google Scholar
  4. O. Song, L. Librescu, and S.-Y. Oh, “Dynamics of pretwisted rotating thin-walled beams operating in a temperature environment,” Journal of Thermal Stresses, vol. 24, no. 3, pp. 255–279, 2001. View at Google Scholar
  5. O. Song, S.-Y. Oh, and L. Librescu, “Dynamic behavior of elastically tailored rotating blades modeled as pretwisted thin-walled beams and incorporating adaptive capabilities,” International Journal of Rotating Machinery, vol. 8, no. 1, pp. 13–25, 2002. View at Google Scholar
  6. S.-Y. Oh, L. Librescu, and O. Song, “Thermoelastic modeling and vibration of functionally graded thin-walled rotating blades,” AIAA Journal, vol. 41, no. 10, pp. 2051–2061, 2003. View at Google Scholar
  7. S.-Y. Oh, L. Librescu, and O. Song, “Vibration of turbomachinery rotating blades made-up of functionally graded materials and operating in a high temperature field,” Acta Mechanica, vol. 166, no. 2, pp. 69–87, 2003. View at Google Scholar
  8. L. Librescu, O. Song, and C. A. Rogers, “Adaptive vibrational behavior of cantilevered structures modeled as composite thin-walled beams,” International Journal of Engineering Science, vol. 31, no. 5, pp. 775–792, 1993. View at Google Scholar
  9. L. Librescu and S. S. Na, “Active vibration control of doubly tapered thin-walled beams using piezoelectric actuation,” Thin-Walled Structures, vol. 39, no. 1, pp. 65–82, 2001. View at Google Scholar
  10. S. S. Na and L. Librescu, “Dynamic behavior of aircraft wings modeled as doubly-tapered composite thin-walled beams,” in Recent Advances in Solids and Structures, Y. W. Kwon and H. H. Chung, Eds., vol. 398 of Pressure Vessels & Piping Division, PVP, pp. 59–68, American Society of Mechanical Engineers, New York, NY, USA, 1999. View at Google Scholar
  11. S. S. Na and L. Librescu, “Modeling and vibration feedback control of rotating tapered beams incorporating adaptive capabilities,” in Recent Advances in Solid and Structures, vol. 415 of Pressure Vessels & Piping Division, PVP, pp. 35–43, American Society of Mechanical Engineers, New York, NY, USA, 2000. View at Google Scholar
  12. S. S. Na and L. Librescu, “Dynamic response of elastically tailored adaptive cantilevers of nonuniform cross section exposed to blast pressure pulses,” International Journal of Impact Engineering, vol. 25, no. 9, pp. 847–867, 2001. View at Google Scholar
  13. S. S. Na and L. Librescu, “Optimal dynamic response control of elastically tailored nonuniform thin-walled adaptive beams,” Journal of Aircraft, vol. 39, no. 3, pp. 469–479, 2002. View at Google Scholar
  14. S. S. Na, L. Librescu, and J.-H. Shim, “Modified bang-bang vibration control applied to adaptive thin-walled beam cantilevers,” AIAA Journal, vol. 42, no. 8, pp. 1717–1721, 2004. View at Google Scholar
  15. L. Librescu, Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell-Type Structures, Noordhoff, Leyden, The Netherlands, 1975.
  16. S.-Y. Oh, O. Song, and L. Librescu, “Effects of pretwist and presetting on coupled bending vibrations of rotating thin-walled composite beams,” International Journal of Solids and Structures, vol. 40, no. 5, pp. 1203–1224, 2003. View at Google Scholar
  17. D. A. Berlincourt, D. R. Curran, and H. Jaffe, “Piezoelectric and piezomagnetic materials and their functions as transducers,” in Physical Acoustics: Principles and Methods, Vol. 1, Part A, W. P. Mason, Ed., pp. 202–204, Academic Press, New York, NY, USA, 1964. View at Google Scholar
  18. B. Downs, “Transverse vibration of cantilever beams having unequal breadth and depth tapers,” ASME Transactions: Journal of Applied Mechanics, vol. 44, no. 4, pp. 737–742, 1977. View at Google Scholar