Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2006 (2006), Article ID 38595, 8 pages
http://dx.doi.org/10.1155/IJRM/2006/38595

Experimental Study of a Flexible Rotor and Its Dependency on the Rolling-Bearing Temperature

Laboratoire de Tribologie et Dynamique des Systèmes, UMR CNRS 5513, Equipe Dynamique des Systèmes et des Structures, École Centrale de Lyon, Ecully Cedex 69134, France

Received 8 November 2005; Accepted 29 December 2005

Copyright © 2006 Jean-Jacques Sinou and Fabrice Thouverez. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. E. Bently, C. T. Hatch, and B. Grissom, Fundamentals of Rotating Machinery Diagnostics, Bently Pressurized Bearing Press, Minden, Nev, USA, 2002.
  2. F. F. Ehrich, Handbook of Rotordynamics, McGraw-Hill, New York, NY, USA, 1992.
  3. T. A. Harris, Rolling Bearing Analysis, John Wiley & Sons, New York, NY, USA, 2001.
  4. J. M. Vance, Rotordynamics of Turbomachinery, John Wiley & Sons, New York, NY, USA, 1988.
  5. T. Yamamoto and Y. Ishida, Linear and Nonlinear Rotordynamics: A Modern Treatment with Applications, John Wiley & Sons, New York, NY, USA, 2001.
  6. M. Lalanne and G. Ferraris, Rotordynamics Prediction in Engineering, John Wiley & Sons, New York, NY, USA, 1990.
  7. D. Childs, Turbomachinery Rotordynamics: Phenomena, Modeling, and Analysis, John Wiley & Sons, New York, NY, USA, 1993.
  8. R. Tiwari, A. W. Lees, and M. I. Friswell, “Identification of dynamic bearing parameters: a review,” The Shock and Vibration Digest, vol. 36, no. 2, pp. 99–124, 2004. View at Google Scholar
  9. E. J. Hahn and P. Y. Chen, “Harmonic balance analysis of general squeeze film damped multidegree-of-freedom rotor bearing systems,” Journal of Tribology, vol. 116, no. 1, pp. 499–507, 1994. View at Google Scholar
  10. S. P. Harsha, K. Sandeep, and R. Prakash, “Non-linear dynamic behaviors of rolling element bearings due to surface waviness,” Journal of Sound and Vibration, vol. 272, no. 3–5, pp. 557–580, 2004. View at Google Scholar
  11. E. Hashish and T. C. Sankar, “Finite element and modal analyses of rotor-bearing systems under stochastic loading conditions,” ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 106, no. 1, pp. 80–89, 1984. View at Google Scholar
  12. J. T. Sopanen and A. M. Mikkola, “Ball bearing vibration analysis including localized and distributed defects,” in Proceedings of ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Chicago, Ill, USA, September 2003.
  13. M. Tiwari, K. Gupta, and O. Prakash, “Dynamic response of an unbalanced rotor supported on ball bearings,” Journal of Sound and Vibration, vol. 238, no. 5, pp. 757–779, 2000. View at Google Scholar
  14. M. Tiwari, K. Gupta, and O. Prakash, “Effect of radial internal clearance of a ball bearing on the dynamics of a balanced horizontal rotor,” Journal of Sound and Vibration, vol. 238, no. 5, pp. 723–756, 2000. View at Google Scholar
  15. M. Tiwari, K. Gupta, and O. Prakash, “Experimental study of a rotor supported by deep groove ball bearing,” International Journal of Rotating Machinery, vol. 8, no. 4, pp. 243–258, 2002. View at Google Scholar
  16. J.-J. Sinou, C. Villa, and F. Thouverez, “Experimental and numerical investigations of a flexible rotor on flexible bearing supports,” International Journal of Rotating Machinery, vol. 2005, no. 3, pp. 179–189, 2005. View at Google Scholar
  17. A. Dimarogonas, Vibration for Engineers, Prentice-Hall, Upper Saddle River, NJ, USA, 1996.