Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2006 (2006), Article ID 71034, 11 pages

Numerical and Experimental Investigations of Steady Micro-Tip Injection on a Subsonic Axial-Flow Compressor Rotor

1School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China
2Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 10080, China

Received 28 February 2006; Revised 9 July 2006; Accepted 14 July 2006

Copyright © 2006 Xingen Lu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. Wilke and H.-P. Kau, “A numerical investigation of the influence of casing treatments on the tip leakage flow in a HPC front stage,” ASME paper 2002-GT-30642, 2002.
  2. D. C. Rabe and C. Hah, “Application of casing circumferential grooves for improved stall margin in a transonic sxial compressor,” ASME paper 2002-GT-30641, 2002.
  3. H. Fujita and H. Takata, “Study on configurations of casing treatment for axial flow compressors,” Bulletin of the Japanese Society of Mechanical Engineers, vol. 27, no. 230, pp. 1675–1681, 1984. View at Google Scholar
  4. X. Lu, J. Zhu, W. Chu, and Y. Wu, “Mechanism of the interaction between casing treatment and tip leakage flow in a subsonic axial compressor,” ASME paper 2006-GT-90077.
  5. H. J. Weigl, J. D. Paduano, L. G. Fréchette et al., “Active stabilization of rotating stall and surge in a transonic single-stage axial compressor,” Journal of Turbomachinery, vol. 120, no. 4, pp. 625–636, 1998. View at Google Scholar
  6. Z. S. Spakovszky, H. J. Weigl, J. D. Paduano, C. M. Van Schalkwyk, K. L. Suder, and M. M. Bright, “Rotating stall control in a high-speed stage with inlet distortion: part I-radial distortion,” Journal of Turbomachinery, vol. 121, no. 3, pp. 510–516, 1999. View at Google Scholar
  7. Z. S. Spakovszky, C. M. Van Schalkwyk, H. J. Weigl, J. D. Paduano, K. L. Suder, and M. M. Bright, “Rotating stall control in a high-speed stage with inlet distortion: part II-circumferential distortion,” Journal of Turbomachinery, vol. 121, no. 3, pp. 517–524, 1999. View at Google Scholar
  8. K. L. Suder, M. D. Hathaway, S. A. Thorp, A. J. Strazisar, and M. B. Bright, “Compressor stability enhancement using discrete tip injection,” Journal of Turbomachinery, vol. 123, no. 1, pp. 14–23, 2001. View at Publisher · View at Google Scholar
  9. X. Lu, J. Zhu, and W. Chu, “Numerical and experimental investigation of stepped tip gap effects on a subsonic axial-flow compressor rotor,” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol. 219, no. 8, pp. 605–616, 2005. View at Publisher · View at Google Scholar
  10. C. Nie, G. Xu, X. Cheng, and J. Chen, “Micro air injection and its unsteady response in a low-speed axial compressor,” ASME paper 2002-GT-30361.
  11. C. Sheng and M. Remotigue, “Numerical simulation of rotor 35 with and without tip injection using an arbitrary mach number flow solver,” AIAA paper 2004-372, 2004.
  12. B. H. Beheshti, J. A. Teixeira, P. C. Ivey, B. Farhanieh, and K. Ghorbanian, “A new design for tip injection in transonic axial compressors,” ASME paper 2006-GT-90007, 2006.
  13. X. Lu, W. Chu, J. Zhu, and Y. Wu, “Experimental and numerical investigation of a sunsonic compressor with bend skewed slot casing treatment,” ASME paper 2006-GT-90026.
  14. “NUMECA's flow integrated environment for turbomachinery and internal flows,” User Manual Version 6.1-1, April 2003.
  15. A. J. Strazisar, M. M. Bright, S. Thorp, D. E. Culley, and K. L. Suder, “Compressor stall control through endwall recirculation,” ASME paper 2004-GT-54295, 2004.
  16. H. D. Vo, C. S. Tan, and E. M. Greitzer, “Criteria for spike initiated rotating stall,” ASME Paper 2005-GT-68374, 2005.