Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2010, Article ID 273716, 17 pages
http://dx.doi.org/10.1155/2010/273716
Review Article

Model Reduction Methods for Rotor Dynamic Analysis: A Survey and Review

1Department of Mechanical and Aerospace Engineering at University of Virginia, 122 Engineer's Way, P.O. Box 400746, Charlottesville, VA 22904-4746, USA
2Department of Systems and Information, University of Virginia, 151 Engineer's Way, P.O. Box 400747, Charlottesville, VA 22904-4747, USA

Received 30 September 2010; Accepted 21 December 2010

Academic Editor: Jerzy Sawicki

Copyright © 2010 Matthew B. Wagner et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Chaudhry, M. Wagner, F. He et al. et al., “A complete rotordynamic analysis of a rotor-disk system using finite element method,” in Proceedings of the 8th IFToMM International Conference on Rotordynamics, KIST, Seoul, Korea, September 2010.
  2. F. C. Nelson, “Rotor dynamics without equations,” International Journal of Condition Monitoring and Diagnostic Engineering Management, vol. 10, no. 3, pp. 2–10, 2007. View at Google Scholar · View at Scopus
  3. J. Chaudhry, T. Dimond, A. Younan, and P. Allaire, “Lateral rotordynamic analysis of a large alternator/flywheel/motor train,” in Proceedings of the ASME Turbo Expo, June 2010.
  4. A. C. Antoulas, D. C. Sorensen, and S. Gugercin, “A survey of model reduction methods for large-scale systems,” Contemporary Mathematics, vol. 280, pp. 193–219, 2001. View at Google Scholar
  5. A. S. Das and J. K. Dutt, “Reduced model of a rotor-shaft system using modified SEREP,” Mechanics Research Communications, vol. 35, no. 6, pp. 398–407, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. Qu, Model Order Reduction Techniques, Springer, New York, NY, USA, 2004.
  7. A. K. Noor, “Recent advances and applications of reduction methods,” Applied Mechanics Reviews, vol. 47, no. 5, pp. 125–146, 1994. View at Google Scholar
  8. S. Gugercin and A. C. Antoulas, “A survey of model reduction by balanced truncation and some new results,” International Journal of Control, vol. 77, no. 8, pp. 748–766, 2004. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  9. A. C. Antoulas, Approximation of Large-Scale Dynamical Systems, Society for Industrial and Applied Mathematics, 2005.
  10. A. Ghafoor and V. Sreeram, “Frequency weighted balanced model reduction: a survey,” in Proceedings of the 9th International Conference on Control, Automation, Robotics and Vision (ICARCV '06), pp. 1–6, December 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. D. F. Enns, “Model reduction with balanced realizations: an error bound and a frequency weighted generalization,” in Proceedings of the 23rd IEEE Conference on Decision and Control, pp. 127–132, December 1984. View at Scopus
  12. C. A. Lin and T. Y. Chiu, “Model reduction via frequency weighted balanced realization,” Control, Theory and Advanced Technology, vol. 8, no. 2, pp. 341–351, 1992. View at Google Scholar · View at Scopus
  13. A. Varga and B. D. O. Anderson, “Accuracy-enhancing methods for balancing-related frequency-weighted model and controller reduction,” Automatica, vol. 39, no. 5, pp. 919–927, 2003. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  14. G. Wang, V. Sreeram, and W. Q. Liu, “A new frequency-weighted balanced truncation method and an error bound,” IEEE Transactions on Automatic Control, vol. 44, no. 9, pp. 1734–1737, 1999. View at Google Scholar · View at Scopus
  15. A. Ghafoor and V. Sreeram, “A survey/review of frequency-weighted balanced model reduction techniques,” Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol. 130, no. 6, Article ID 061004, pp. 1–16, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. A. C. Antoulas, “An overview of model reduction methods and a new result,” in Proceedings of the 48th IEEE Conference on Decision and Control Held Jointly with 28th Chinese Control Conference (CDC/CCC '09), pp. 5357–5361, December 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. G. Genta and A. Gugliotta, “A conical element for finite element rotor dynamics,” Journal of Sound and Vibration, vol. 120, no. 1, pp. 175–182, 1988. View at Google Scholar · View at Scopus
  18. D. Combescure and A. Lazarus, “Refined finite element modelling for the vibration analysis of large rotating machines: application to the gas turbine modular helium reactor power conversion unit,” Journal of Sound and Vibration, vol. 318, no. 4-5, pp. 1262–1280, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Nandi, “Reduction of finite element equations for a rotor model on non-isotropic spring support in a rotating frame,” Finite Elements in Analysis and Design, vol. 40, no. 9-10, pp. 935–952, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. E. Chatelet, F. D'Ambrosio, and G. Jacquet-Richardet, “Toward global modelling approaches for dynamic analyses of rotating assemblies of turbomachines,” Journal of Sound and Vibration, vol. 282, no. 1-2, pp. 163–178, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. G. F. M. Lalanne, Rotordynamic Prediction in Engineering, John Wiley & Sons, New York, NY, USA, 1998.
  22. T. Yamamoto and Y. Ishida, Linear and Nonlinear Rotordynamics, John Wiley & Sons, New York, NY, USA, 2001.
  23. D. Childs, Turbomachinery Rotordynamics: Phenomena, Modeling and Analysis, John Wiley & Sons, New York, NY, USA, 1993.
  24. J. Tonnesen and P. K. Hansen, “Some experiments on the steady state charactersitics of a cylindrical fluid-film bearing considering thermal effects,” Journal of Lubrication Technology, Transaction of ASME, pp. 107–114, 1981. View at Google Scholar
  25. P. E. Allaire, “Rotor dynamics course notes,” Tech. Rep., Rotating Machinery and Controls Lab, Univerity of Virginia, 2009. View at Google Scholar
  26. F. C. Nelson, “A brief history of early rotor dynamics,” Journal of Sound and Vibration, vol. 37, no. 6, pp. 8–11, 2003. View at Google Scholar · View at Scopus
  27. J. M. Vance, B. T. Murphy, and H. A. Tripp, “Critical speeds of rotating machinery: computer predictions vs. experimental measurements—part ii: effects of tilting pad bearings and foundation effects,” ASME Journal of Vibration, Acoustics, Stress and Reliability in Design, vol. 109, pp. 8–14, 1987. View at Google Scholar
  28. H. D. Nelson and J. M. McVaugh, “The dynamics of rotor bearing systems using finite elements,” Journal of Engineering for Industry, vol. 98, pp. 593–600, 1976. View at Google Scholar
  29. R. L. Ruhl and J. F. Booker, “Finite element model for distributed parameter turborotor systems,” Journal of Engineering for Industry, Transactions of the ASME, vol. 94, no. 1, pp. 126–132, 1972. View at Google Scholar · View at Scopus
  30. R. L. Eshelman and R. A. Eubanks, “On the critical speeds of a continuous rotor,” ASME Journal of Engineering for Industry, vol. 91, pp. 1180–1188, 1969. View at Google Scholar
  31. H. D. Nelson, “A finite rotating shaft element using timoshenko beam theory,” ASME Journal of Mechanical Design, vol. 102, no. 4, pp. 793–803, 1980. View at Google Scholar · View at Scopus
  32. D. L. Thomas, J. M. Wilson, and R. R. Wilson, “Timoshenko beam finite elements,” Journal of Sound and Vibration, vol. 31, no. 3, pp. 315–330, 1973. View at Google Scholar · View at Scopus
  33. K. E. Rouch and J. S. Kao, “A tapered beam finite element for rotor dynamics analysis,” Journal of Sound and Vibration, vol. 66, no. 1, pp. 119–140, 1979. View at Google Scholar · View at Scopus
  34. T. A. Vest and M. S. Darlow, “Modified conical beam element based on finite element analysis. Experimental correlations,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 112, no. 3, pp. 350–354, 1990. View at Google Scholar · View at Scopus
  35. A. Nandi, “On computation of response of a rotor in deformed configuration using three-dimensional finite elements,” Communications in Numerical Methods in Engineering, vol. 19, no. 3, pp. 179–195, 2003. View at Publisher · View at Google Scholar · View at Scopus
  36. J. S. Rao and R. Sreenivas, “Dynamics of asymmetric rotors using solid models,” in Proceedings of the International Gas Turbine Congress, 2003.
  37. A. Nandi and S. Neogy, “Modelling of rotors with three-dimensional solid finite elements,” Journal of Strain Analysis for Engineering Design, vol. 36, no. 4, pp. 359–371, 2001. View at Publisher · View at Google Scholar · View at Scopus
  38. R. W. Stephenson and K. W. Rouch, “Modeling rotating shafts using axisymmetric solid finite elements with matrix reduction,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 115, no. 4, pp. 484–489, 1993. View at Google Scholar · View at Scopus
  39. E. Chatelet, D. Lornage, and G. Jacquet-Richardet, “A three dimensional modeling of the dynamic behavior of composite rotors,” International Journal of Rotating Machinery, vol. 8, no. 3, pp. 185–192, 2002. View at Google Scholar · View at Scopus
  40. M. Geradin and N. Kill, “A new approach to finite element modeling of flexible rotors,” Engineering Computations, vol. 1, no. 1, pp. 52–64, 1984. View at Google Scholar · View at Scopus
  41. D. M. Tran, “Component mode synthesis methods using interface modes. Application to structures with cyclic symmetry,” Computers and Structures, vol. 79, no. 2, pp. 209–222, 2001. View at Publisher · View at Google Scholar · View at Scopus
  42. D. M. Tran, “Component mode synthesis methods using partial interface modes: application to tuned and mistuned structures with cyclic symmetry,” Computers and Structures, vol. 87, no. 17-18, pp. 1141–1153, 2009. View at Publisher · View at Google Scholar · View at Scopus
  43. G. Jacquet-Richardet, G. Ferraris, and P. Rieutord, “Fequencies and modes of rotating flexible bladed disc-shaft assemblies: a global cyclic symmetry approach,” Journal of Sound and Vibration, vol. 191, no. 5, pp. 901–915, 1996. View at Publisher · View at Google Scholar · View at Scopus
  44. I. Ansys, “Rotordynamic analysis guide,” Tech. Rep., Swanson Analysis Systems, Inc., 2009. View at Google Scholar
  45. H. N. Ozguven and Z. Levent Ozkan, “Whirl speeds and unbalance response of multibearing rotors using finite elements,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 106, no. 1, pp. 72–79, 1984. View at Google Scholar · View at Scopus
  46. L. M. Greenhill, W. B. Bickford, and H. D. Nelson, “A conical beam finite element for rotor dynamic analysis,” Journal of Vibration, Acoustics, Stress, and Reliability in Design, vol. 107, no. 4, pp. 421–430, 1985. View at Google Scholar · View at Scopus
  47. J. R. T. C. Gmur, “Shaft fnite elements for rotor dynamics analysis,” ASME Journal of Vibration and Acoustics, vol. 113, pp. 482–493, 1993. View at Google Scholar
  48. R. W. Stephenson, K. E. Rouch, and R. Arora, “Modelling of rotors with axisymmetric solid harmonic elements,” Journal of Sound and Vibration, vol. 131, no. 3, pp. 431–443, 1989. View at Google Scholar · View at Scopus
  49. C. M. P. Bladh, “Component-mode-based reduced order modeling techniques for mistuned bladed disks—part II: application,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 1, pp. 100–108, 2001. View at Publisher · View at Google Scholar · View at Scopus
  50. C. M. P. Bladh, “Component-mode-based reduced order modeling techniques for mistuned bladed disks—part 1: theoretical models,” Journal of Engineering for Gas Turbines and Power, vol. 123, no. 1, pp. 89–99, 2001. View at Publisher · View at Google Scholar · View at Scopus
  51. A. Nandi, S. Neogy, and A. S. Das, “Application of the harmonic balance technique to finite element models of asymmetric rotors via sparse kronecker products,” Journal of Strain Analysis for Engineering Design, vol. 40, no. 6, pp. 549–557, 2005. View at Google Scholar
  52. J. Sasek, M. Hajzman, and V. Zeman, “Modeling of rotating shafts with flexible disks,” in Proceedings of 22nd Conference Computational Mechanics, 2006.
  53. D. S. Kumar, C. Sujatha, and N. Ganesan, “A modified semi-analytical approach towards the modelling of a shaft-disc system,” Computers and Structures, vol. 61, no. 1, pp. 189–191, 1996. View at Publisher · View at Google Scholar · View at Scopus
  54. O. A. Bauchau, J. Rodriguez, and S. Y. Chen, “Coupled rotor-fuselage analysis with finite motions using component mode synthesis,” Journal of the American Helicopter Society, vol. 49, no. 2, pp. 201–211, 2004. View at Publisher · View at Google Scholar · View at Scopus
  55. R. W. Stephenson, Rotor system analysis: a coupled rotor-foundation matrix approach, Ph.D. thesis, 1990.
  56. Z. He, B. I. Epureanu, and C. Pierre, “Fluid-structural coupling effects on the dynamics of mistuned bladed disks,” AIAA Journal, vol. 45, no. 3, pp. 552–561, 2007. View at Publisher · View at Google Scholar · View at Scopus
  57. M. A. Mohiuddin, M. Bettayeb, and Y. A. Khulief, “Dynamic analysis and reduced order modelling of flexible rotor-bearing systems,” Computers and Structures, vol. 69, no. 3, pp. 349–359, 1998. View at Google Scholar · View at Scopus
  58. K. E. Rouch and J. S. Kao, “Dynamic reduction in rotor dynamics by the finite element method,” Journal of Mechanical Design, Transactions of the ASME, vol. 102, no. 2, pp. 360–368, 1980. View at Google Scholar · View at Scopus
  59. P. R. Houlston, S. D. Garvey, and A. A. Popov, “Modal control of vibration in rotating machines and other generally damped systems,” Journal of Sound and Vibration, vol. 302, no. 1-2, pp. 104–116, 2007. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  60. Y. G. Jei and C. W. Lee, “Modal analysis of continuous asymmetrical rotor-bearing systems,” Journal of Sound and Vibration, vol. 152, no. 2, pp. 245–262, 1992. View at Google Scholar · View at Scopus
  61. Y. A. Khulief and M. A. Mohiuddin, “On the dynamic analysis of rotors using modal reduction,” Finite Elements in Analysis and Design, vol. 26, no. 1, pp. 41–55, 1997. View at Google Scholar · View at Scopus
  62. C. W. Lee, R. Katz, A. G. Ulsoy, and R. A. Scott, “Modal analysis of a distributed parameter rotating shaft,” Journal of Sound and Vibration, vol. 122, no. 1, pp. 119–130, 1988. View at Google Scholar · View at Scopus
  63. W. Wang and J. Kirkhope, “New eigensolutions and modal analysis for gyroscopic/rotor systems—part 1: undamped systems,” Journal of Sound and Vibration, vol. 175, no. 2, pp. 159–170, 1994. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  64. A. Shanmugam and C. Padmanabhan, “A fixed-free interface component mode synthesis method for rotordynamic analysis,” Journal of Sound and Vibration, vol. 297, no. 3–5, pp. 664–679, 2006. View at Publisher · View at Google Scholar · View at Scopus
  65. W. Wang and J. Kirkhope, “Component mode synthesis for damped rotor systems with hybrid interfaces,” Journal of Sound and Vibration, vol. 177, no. 3, pp. 393–410, 1994. View at Publisher · View at Google Scholar · View at Scopus
  66. D. A. Glasgow and H. D. Nelson, “Stability analysis of rotor-bearing systems using component mode synthesis,” Journal of Mechanical Design, Transactions of the ASME, vol. 102, no. 2, pp. 352–359, 1980. View at Google Scholar · View at Scopus
  67. E. M. ElBeheiry, “On eigenproblem solution of damped vibrations associated with gyroscopic moments,” Journal of Sound and Vibration, vol. 320, no. 3, pp. 691–704, 2009. View at Publisher · View at Google Scholar · View at Scopus
  68. R. Ohayon, R. Sampaio, and C. Soize, “Dynamic substructuring of damped structures using singular value decomposition,” Journal of Applied Mechanics, Transactions ASME, vol. 64, no. 2, pp. 292–298, 1997. View at Google Scholar · View at Scopus
  69. W. Wang and J. Kirkhope, “Complex component mode synthesis for damped systems,” Journal of Sound and Vibration, vol. 181, no. 5, pp. 781–800, 1995. View at Publisher · View at Google Scholar · View at Scopus
  70. M. R. Brake and J. A. Wickert, “Modal analysis of a continuous gyroscopic second-order system with nonlinear constraints,” Journal of Sound and Vibration, vol. 329, no. 7, pp. 893–911, 2010. View at Publisher · View at Google Scholar · View at Scopus
  71. V. Barzdaitis, M. Bogdevicius, R. Didziokas, and M. Vasylius, “Modeling and diagnostics of gyroscopic rotor,” Journal of Vibroengineering, vol. 11, no. 4, pp. 627–635, 2009. View at Google Scholar · View at Scopus
  72. A. K. Samantaray, “Steady-state dynamics of a non-ideal rotor with internal damping and gyroscopic effects,” Nonlinear Dynamics, vol. 56, no. 4, pp. 443–451, 2009. View at Publisher · View at Google Scholar · View at Scopus
  73. A. Y. Lee, “A krylov model reduction methodology for articulated, multi-flexible body structures,,” Tech. Rep., Jet Propulsion Laboratory at California Institute of Technology, 1994, http://trs-new.jpl.nasa.gov/dspace/bitstream/2014/32588/1/94-0334.pdf. View at Google Scholar
  74. U. Baur, C. A. Beattie, P. Benner, and S. Gugercin, “Interpolatory projection methods for parameterized model reduction,” in Chemnitz Scientific Computing Preprints, 2009. View at Google Scholar
  75. H. Panzer, J. Mohring, R. Eid, and B. Lohmann, “Parametric model order reduction by matrix interpolation,” Automatisierungstechnik, vol. 58, no. 8, pp. 475–484, 2010. View at Publisher · View at Google Scholar
  76. L. Daniel, O. C. Siong, L. S. Chay, K. H. Lee, and J. White, “A multiparameter moment-matching model-reduction approach for generating geometrically parameterized interconnect performance models,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 23, no. 5, pp. 678–693, 2004. View at Publisher · View at Google Scholar · View at Scopus
  77. V. Ganine, D. Laxalde, H. Michalska, and C. Pierre, “Parameterized reduced order modeling of misaligned stacked disks rotor assemblies,” Journal of Sound and Vibration, vol. 330, no. 3, pp. 445–460, 2011. View at Publisher · View at Google Scholar
  78. J. T. Sawicki and W. K. Gawronski, “Balanced model reduction and control of rotor-bearing systems,” Journal of Engineering for Gas Turbines and Power, vol. 119, no. 2, pp. 456–463, 1997. View at Google Scholar · View at Scopus
  79. G. W. Fan, H. D. Nelson, P. E. Crouch, and M. P. Mignolet, “LQR-based least-squares output feedback control of rotor vibrations using the complex mode and balanced realization methods,” Journal of Engineering for Gas Turbines and Power, vol. 115, no. 2, pp. 314–323, 1993. View at Google Scholar · View at Scopus
  80. Y. Chahlaoui, D. Lemonnier, A. Vandendorpe, and P. Van Dooren, “Second-order balanced truncation,” Linear Algebra and Its Applications, vol. 415, no. 2-3, pp. 373–384, 2006. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  81. V. Sreeram and S. Sahlan, “Improved results on frequency weighted balanced truncation,” in Proceedings of the 48th IEEE Conference on Decision and Control Held Jointly with 28th Chinese Control Conference (CDC/CCC '09), pp. 3250–3255, December 2009. View at Publisher · View at Google Scholar · View at Scopus
  82. C. A. Beattie and S. Gugercin, “A trust region method for optimal H model reduction,” in Proceedings of the 48th IEEE Conference on Decision and Control Held Jointly with 28th Chinese Control Conference (CDC/CCC '09), pp. 5370–5375, December 2009. View at Publisher · View at Google Scholar · View at Scopus
  83. S. Gugercin, R. V. Polyuga, C. A. Beattie, and A. J. Van Der Schaft, “Interpolation-based H model reduction for port-Hamiltonian systems,” in Proceedings of the 48th IEEE Conference on Decision and Control Held Jointly with 28th Chinese Control Conference (CDC/CCC '09), pp. 5362–5369, December 2009. View at Publisher · View at Google Scholar · View at Scopus
  84. R. Tasaltin, “Active vibration control strategies for a flexible-rotor bearing system,” 1992.
  85. R. J. Guyan, “Reduction of stiffness and mass matrices,” AIAA Journal, vol. 3, p. 380, 1965. View at Google Scholar
  86. R. D. Cook, D. S. Malkus, M. E. Plesha, and R. J. Witt, Concepts and Application of Finite Element Analysis, John Wiley & Sons, New York, NY, USA, 4th edition, 2001.
  87. M. N. Sahinkaya, A. G. Abulrub, P. S. Keogh, and C. R. Burrows, “Multiple sliding and rolling contact dynamics for a flexible rotor/magnetic bearing system,” IEEE-ASME Transactions on Mechatronics, vol. 12, no. 2, pp. 179–189, 2006. View at Google Scholar
  88. J. W. Lund, “Modal response of a flexible rotor in fluid film bearings,” ASME Journal of Engineering for Industry, vol. 96, no. 2, pp. 525–533, 1974. View at Google Scholar · View at Scopus
  89. A. A. Younan and A. El-Shafei, “Model calibration of anisotropic rotordynamic systems with speed-dependent parameters,” Journal of Engineering for Gas Turbines and Power, vol. 130, no. 4, Article ID 042502, 2008. View at Publisher · View at Google Scholar · View at Scopus
  90. R. M. Laurenson, “Modal analysis of rotating flexible structures,” AIAA Journal, vol. 14, no. 10, pp. 1444–1450, 1976. View at Google Scholar · View at Scopus
  91. S. W. Hong and J. H. Park, “Modal analysis of multi-stepped distributed-parameter rotor-bearing systems using exact dynamic elements,” Journal of Vibration and Acoustics, Transactions of the ASME, vol. 123, no. 3, pp. 401–403, 2001. View at Google Scholar · View at Scopus
  92. P. Mahadevan, C. S. Jog, and A. Chatterjee, “Modal projections for synchronous rotor whirl,” Proceedings of the Royal Society A, vol. 464, no. 2095, pp. 1739–1760, 2008. View at Publisher · View at Google Scholar · View at Scopus
  93. P. E. A. C. K. Choy and E. J. Gunter, “Damped critical speeds and unblance response by complex modal analysis,” Tech. Rep., Rotating Machinery and Controls Lab, Univerity of Virginia, 1976. View at Google Scholar
  94. P. E. A. E. J. Gunter and C. K. Choy, “Modal analysis of turborotors using planar modes—theory,” Tech. Rep., Rotating Machinery and Controls Lab, Univerity of Virginia, 1977. View at Google Scholar
  95. W. C. Hurty, “Dynamic analysis of structural systems using component modes,” AIAA Journal, vol. 3, pp. 678–685, 1965. View at Google Scholar
  96. R. R. Craig and M. C. Bampton, “Coupling of substructures for dynamics analysis,” AIAA Journal, vol. 6, pp. 1313–1319, 1968. View at Google Scholar
  97. P. Apiwattanalunggarn, S. W. Shaw, and C. Pierre, “Component mode synthesis using nonlinear normal modes,” Nonlinear Dynamics, vol. 41, no. 1–3, pp. 17–46, 2005. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  98. B. Biondi and G. Muscolino, “Component-mode synthesis method variants in the dynamics of coupled structures,” Meccanica, vol. 35, no. 1, pp. 17–38, 2000. View at Publisher · View at Google Scholar · View at Scopus
  99. D. F. Li and E. J. Gunter, “A study of the modal truncation error in the component analysis of a dual-rotor system,” Tech. Rep., Rotating Machinery and Controls Lab, University of Virginia, 1980. View at Google Scholar
  100. R. Subbiah, R. Bhat, and T. Sankar, “Dynamic response of rotors using modal reduction techniques,” Transactions of the ASME, Journal of Vibrations, Acoustics, and Reliability in Design, vol. 111, pp. 360–365, 1989. View at Google Scholar
  101. T. Iwatsubo, K. Shimbo, and S. Kawamura, “The study of nonlinear vibration analysis of rotor system using component mode synthesis method—(analysis using the harmonic balance method),” JSME International Journal Series C, vol. 45, no. 1, pp. 136–141, 2002. View at Google Scholar
  102. B. C. Moore, “Principal component analysis in linear systems-controllability observability and model reduction,” IEEE Transactions on Automatic Control, vol. 26, no. 1, pp. 17–32, 1981. View at Google Scholar · View at Scopus
  103. J. B. Burl, Linear Optimal Control: H2 and H Infinity Methods, Addison-Wesley, Reading, Mass, USA, 1998.
  104. M. Wamsler, “Retaining the influence of crucial local effects in mixed Guyan and modal reduction,” Engineering with Computers, vol. 20, no. 4, pp. 363–371, 2005. View at Publisher · View at Google Scholar · View at Scopus
  105. J. L. Guyader, “Characterization and reduction of dynamic models of vibrating systems with high modal density,” Journal of Sound and Vibration, vol. 328, no. 4-5, pp. 488–506, 2009. View at Publisher · View at Google Scholar · View at Scopus