Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012 (2012), Article ID 509209, 14 pages
http://dx.doi.org/10.1155/2012/509209
Research Article

Effect of the Radial Pressure Gradient on the Secondary Flow Generated in an Annular Turbine Cascade

Mechanical Engineering Department, Benha Faculty of Engineering, Benha University, Benha 13512, Egypt

Received 17 October 2011; Revised 19 March 2012; Accepted 20 March 2012

Academic Editor: J.-C. Han

Copyright © 2012 Hesham M. El-Batsh. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. S. Langston, M. L. Nice, and R. M. Hooper, “Three-dimensional flow within a turbine cascade passage,” Journal of Engineering for Power-Transactions of the ASME, vol. 99, no. 1, pp. 21–28, 1977. View at Google Scholar · View at Scopus
  2. C. H. Sieverding, “Recent progress in the understanding of basic aspects of secondary flows in turbine blade passages,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 2, pp. 248–257, 1985. View at Google Scholar · View at Scopus
  3. L. S. Langston, “Cross flows in a turbine cascade passage,” Journal of Engineering for Power, Transactions of ASME, vol. 102, pp. 866–874, 1980. View at Google Scholar
  4. J. Moore and R. Y. Adhye, “Secondary flows and losses downstream of a turbine cascade,” Journal of Engineering for Gas Turbines and Power, vol. 107, no. 4, pp. 961–968, 1985. View at Google Scholar · View at Scopus
  5. A. Perdichizzi and V. Dossena, “Incidence angle and pitch-chord effects on secondary flows downstream of a turbine cascade,” Journal of Turbomachinery, vol. 115, no. 3, pp. 383–391, 1993. View at Google Scholar · View at Scopus
  6. A. F. Slitenko and Y.M. Jukov, “Experimental investigation of three-dimensional secondary flow on the endwall of a blade channel in an axial turbine cascade,” in Proceedings of the Turbine Technical Conference & Exposition, Munich, Germany, May 2000.
  7. M. W. Benner, S. A. Sjolander, and S. H. Moustapha, “Measurements of secondary flows downstream of a turbine cascade at off-design incidence,” in Proceedings of the Turbine Technical Conference & Exposition, Vienna, Austria, June 2004.
  8. H. El-Batsh and M. Bassily Hanna, “Numerical and experimental prediction of secondary flow through a rectilinear cascade for different aspect ratios,” in Proceedings of the International Mechanical Engineering Conference (IMEC '04), Kuwait, December 2004.
  9. H. El-Batsh and M. Bassily Hanna, “An investigation on the effect of endwall movement on the tip clearance loss using annular turbine cascade,” International Journal of Rotating Machinery, vol. 2011, Article ID 489150, 11 pages, 2011. View at Google Scholar
  10. T. Matsunuma, “Effects of Reynolds number and free-stream turbulence on turbine tip clearance flow,” in Proceedings of the Gas Turbie Technology: Focus for the Future, pp. 389–401, June 2005. View at Scopus
  11. C. Hirsch, “Advance methods for cascade testing,” Advisory Group for Aerospace Research and Development AGARD-AG-328, 1993. View at Google Scholar
  12. D. M. Vogt and T. H. Fransson, “A new turbine cascade for aeromechanical testing,” in Proceedings of the 16th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines, Cambridgem, UK, September 2002.
  13. T. Povey, T. V. Jones, and M. L. G. Oldfield, “On a novel annular sector cascade technique,” in Proceedings of the Turbine Technical Conference and Exposition, pp. 1369–1380, June 2004. View at Scopus
  14. J. L. Gilarranz, A. J. Ranz, J. A. Kopko, and J. M. Sorokes, “On the use five-hole probes in the testing of industrial centrifugal compressors,” Journal of Turbomachinery, vol. 127, no. 1, pp. 91–106, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Ingram and D. Gregory-Smith, “An automated instrumentation system for flow and loss measurements in a cascade,” Flow Measurement and Instrumentation, vol. 17, no. 1, pp. 23–28, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. D. C. Wilcox, Turbulence Modeling for CFD, DCW Industries, La Canada, Calif, USA, 1993.
  17. J. E. Bardina, P. G. Huang, and T. J. Coakley, “Turbulence modeling validation, testing and development,” NASA Technical Memorandum 110446, 1997. View at Google Scholar
  18. B. M. Holley, S. Becz, and L. S. Langston, “Measurement and calculation of turbine cascade endwall pressure and shear stress,” Journal of Turbomachinery, vol. 128, no. 2, pp. 232–239, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. F. R. Menter, “Two-equation eddy-viscosity turbulence models for engineering applications,” AIAA Journal, vol. 32, no. 8, pp. 1598–1605, 1994. View at Google Scholar · View at Scopus
  20. T. Hildebrandt and L. Fottner, “A numerical study of the influence of grid refinement and turbulence modeling on the flow field inside a highly loaded turbine cascade,” Journal of Turbomachinery, vol. 121, no. 4, pp. 709–716, 1999. View at Google Scholar · View at Scopus
  21. M. Casey and T. Wintergerste, ERCOFTAC special interest group on quality and trust in industrial CFD, Best Practices Guidelines, 2000.