Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012 (2012), Article ID 564275, 13 pages
http://dx.doi.org/10.1155/2012/564275
Research Article

Reciprocating Compressor 1D Thermofluid Dynamic Simulation: Problems and Comparison with Experimental Data

1Dipartimento di Meccanica ed Energetica (DiME), Università Degli Studi di Napoli Federico II, 80125 Napoli, Italy
2Facoltà di Ingegneria, Università Degli Studi di Napoli Federico II, 80125 Napoli, Italy

Received 9 February 2012; Revised 27 March 2012; Accepted 31 March 2012

Academic Editor: Ryo Amano

Copyright © 2012 A. Gimelli et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. A. Tassou and T. Q. Qureshi, “Comparative performance evaluation of positive displacement compressors in variable-speed refrigeration applications,” International Journal of Refrigeration, vol. 21, no. 1, pp. 29–41, 1998. View at Google Scholar · View at Scopus
  2. E. Winandy, C. Saavedra O, and J. Lebrun, “Simplified modelling of an open-type reciprocating compressor,” International Journal of Thermal Sciences, vol. 41, no. 2, pp. 183–192, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. C. O. R. Negrão, R. H. Erthal, D. E. V. Andrade, and L. W. D. Silva, “A semi-empirical model for the unsteady-state simulation of reciprocating compressors for household refrigeration applications,” Applied Thermal Engineering, vol. 31, no. 6-7, pp. 1114–1124, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. C. D. Pérez-Segarra, J. Rigola, and A. Oliva, “Modeling and numerical simulation of the thermal and fluid dynamic behavior of hermetic reciprocating compressors—part 1: theoretical basis,” HVAC and R Research, vol. 9, no. 2, pp. 215–235, 2003. View at Google Scholar · View at Scopus
  5. C. D. Pérez-Segarraa, J. Rigolaa, and A. Olivaa, “Modeling and numerical simulation of the thermal and fluid dynamic behavior of hermetic reciprocating compressors-part 2: experimental investigation,” HVAC&R Research, vol. 9, no. 2, pp. 237–249, 2003. View at Google Scholar
  6. F. Bozza, M. Manna, and A. Pascarelli, “Un approccio misto 0-D/1-D per la simulazione di M.C.I. a 2 tempi,” in Atti del 49° Congresso Nazionale ATI, vol. 2, pp. 1835–1847, SGE-Padova, Settembre 1994.
  7. M. N. Srinivas and C. Padmanabhan, “Computationally efficient model for refrigeration compressor gas dynamics,” International Journal of Refrigeration, vol. 25, no. 8, pp. 1083–1092, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Woollatt, “Factors affecting reciprocating compressor performance,” Hydrocarbon Processing, vol. 72, no. 6, pp. 6–65, 1993. View at Google Scholar · View at Scopus
  9. M. Manna, A three dimensional high resolution compressible flow solver, Ph.D. thesis, Catholic University of Leuven—Von Karman Institute for Fluid Dynamics, 1992, also in Technical Note 180, VKI, 1992.
  10. F. Bozza, R. Tuccillo, and D. deFalco, “A two-stroke engine model based on advanced simulation of fundamental processes,” in Proceedings of the International Off-Highway & Powerplant Congress & Exposition, SAE Paper no. 952139, Milwaukee, Wis, USA.
  11. Society of Automotive Engineers, Design and Emissions of Small Two- and Four-Stroke Engines, SAE SP-1112, Society of Automotive Engineers, 1995.
  12. F. Bozza, M. C. Cameretti, and R. Tuccillo, “Numerical simulation of in-cylinder processes and duct flow in a light-duty diesel engine,” in Proceedings of the 4th International Symposium on Small Diesel Engines, pp. 24–25, Varsavia, Poland, pubblicato su Journal of Polish Cimac, vol. 2, no. 1, pp. 51–66, 1996.
  13. F. Bozza, A. Senatore, R. Tuccillo, and A. Gimelli, “Caratterizzazione sperimentale e teorica del funzionamento di un motore diesel di concezione avanzata,” Rivista—ATA—Associazione Tecnica dell'Automobile, pp. 117–129, 1997. View at Google Scholar
  14. F. Bozza, M. C. Cameretti, A. Senatore, and R. Tuccillo, “Experimental investigation and numerical modelling of an advanced turbocharged D.I. diesel engine,” in Proceedings of the SAE International Congress & Exhibition, SAE Paper no. 970057, pp. 19–31, February 1997, pubblicato anche sul volume “Engine Modeling”, SAE SP-1255, 1997. View at Scopus
  15. F. Bozza, M. C. Cameretti, A. Senatore, and R. Tuccillo, “A flow and a combustion model for NOx emission evaluation in a turbocharged diesel engine,” in Proceedings of the 3rd International Conference on Internal Combustion Engines: Experiments and Modeling (ICE '97), pp. 153–162, Capri, Italy, Settembre 1997.
  16. F. Bozza, M. C. Cameretti, and R. Tuccillo, “Numerical simulation of transient behaviour of an EGR equipped turbocharged engine,” in Proceedings of the 4th International Conference on Internal Combustion Engines: Experiments and Modeling (ICE '99), pp. 313–320, Capri, Italy, Settembre 1999.
  17. F. Bozza, A. Senatore, and R. Tuccillo, “Integrated numerical-experimental method for the analysis of in-cylinder processes in an EGR equipped diesel engine,” in Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division, pp. 16–20, Ann Arbor, Mich, USA, Ottobre 1999.
  18. F. Bozza, A. Gimelli, and R. Tuccillo, “The control of a VVA-equipped SI engine operation by means of 1D simulation and mathematical optimization,” in Proceedings of the SAE International Congress & Exhibition, vol. SP-1692 of SAE Paper no. 2002-01-1107, Detroit, Mich, USA, 2002, Published also in SAE Transactions, Journal of Engines, vol. 111, pp. 1790 –1801, 2003.
  19. F. Bozza and A. Gimelli, “A comprehensive 1D model for the simulation of a small-size two-stroke SI engine,” in Proceedings of the SAE World Congress & Exhibition on Modeling of SI and Diesel Engines, vol. SP-1830 of SAE Paper no. 2004-01-0999, pp. 165–177, March 2004, Published also in the on the SAE Transactions, Journal of Engines, section 3, July 2005.
  20. F. Bozza, A. Gimelli, V. Pianese, S. Martino, and R. Curion, “An acoustic design procedure for intake systems: 1D analysis and experimental validation,” in Proceedings of the SAE World Congress & Exhibition on Modeling of SI and Diesel Engines, vol. SP-1867, pp. 139–147, March 2004, Published also in Transactions Journal of Passenger Cars, vol .6, pp. 172–180, 2005.
  21. D. Siano, F. E. Corcione, F. Bozza, A. Gimelli, and S. Manelli, “Characterization of the noise emitted by a single cylinder diesel engine: experimental activities and 1D simulation,” in Proceedings of the SAE Noise and Vibration Conference and Exhibition, SAE Paper no. 2005-01-2483, Grand Traverse, Mich, USA, May 2005.
  22. F. Bozza, A. Gimelli, R. Piazzesi, F. Fortunato, V. Pianese, and D. Siano, “The prediction of the performance and gasdynamic noise emitted by a medium-size spark-ignition engine by means of 1D and 3D analyses,” in Proceedings of the SAE World Congress & Exhibition on Modeling of SI and Diesel Engines, vol. SP-2079 of SAE Paper no. 2007-01-0380, Detroit, Mich, USA, April 2007.
  23. F. Bozza, A. Gimelli, L. Strazzullo, E. Torella, and C. Cascone, “Steady-state and transient operation simulation of a, “downsized” turbocharged SI engine,” in Proceedings of the SAE World Congress & Exhibition on Modeling of SI and Diesel Engines, vol. SP-2079 of SAE Paper no. 2007-01-0381, Detroit, Mich, USA, April 2007.
  24. F. Bozza, A. Gimelli, L. Andreassi, V. Rocco, and R. Scarcelli, “1D-3D analysis of the scavenging and combustion process in a gasoline and natural-gas fuelled two-stroke engine,” in Proceedings of the SAE World Congress & Exhibition on Modeling of SI and Diesel Engines, SAE Paper no. 2008-01-1087, p. 303, Detroit, Mich, USA, April 2008, On SP-2156 (Modeling of SI and Diesel Engines, 2008), Journal SAE Technical Paper, pp. 303-316.
  25. F. Bozza and A. Gimelli, “Unsteady 1D simulation of a turbocharger compressor,” in Proceedings of the SAE World Congress & Exhibition on Modeling of SI and Diesel Engines, SAE Paper no. 2009-01- 0308, pp. 67–76, Detroit, Mich, USA, April 2009, Also in SAE International Journal of Engines, vol. 2, pp. 189–198, October 2009.
  26. T. Tian, Modeling the performance of the piston ring-pack in internal combustion engines, Ph.D. thesis, Massachusetts Institute of Technology, 1997.
  27. O. Pennacchia, Studio di compressori alternativi dotati di manovellismo non convenzionale, Tesi di laurea in Ingegneria Meccanica, Università di Napoli Federico II, 2003.
  28. A. Harten, “On a class of high resolution total variation stable finite difference schemes,” Journal of Computational Physics, vol. 21, pp. 21–23, 1984. View at Google Scholar
  29. D. S. Miller, Internal Flow Systems, 1990.
  30. L. Liu, Modeling the performance of the piston ring pack with consideration of non-axisymmetric characteristics of the power cylinder system in IC Engines, Ph.D. thesis, Massachusetts Institute of Technology, 2005.
  31. K. Jia, A coupled model for ring dynamics, gas flow and oil flow through the ring grooves in IC engines, Ph.D. thesis, Massachusetts Institute of Technology, 2009.