Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2012 (2012), Article ID 589720, 14 pages
http://dx.doi.org/10.1155/2012/589720
Research Article

On Mixed Flow Turbines for Automotive Turbocharger Applications

IHI Charging Systems International GmbH, Engineering Division, Haberstraße 24, D-69126 Heidelberg, Germany

Received 19 December 2011; Accepted 8 June 2012

Academic Editor: Nick C. Baines

Copyright © 2012 Bernhardt Lüddecke et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Japikse and N. C. Baines, Introduction to Turbomachinery, Concepts ETI, 1997.
  2. R. Golloch, Downsizing bei Verbrennungsmotoren, Springer, 2005.
  3. P. Lückert, F. Kreitmann, N. Merdes et al., “The new 1. 8-litre 4-cylinder petrol engine with direct injection and turbo charging for all passenger cars with standard drive trains from Mercedes-Benz,” in Wiener Motorensymposium, 2009.
  4. D. Hagelstein, L. Hentschel, S. Strobel et al., Die Aufladeentwicklung für den Neuen 1.2l TSI Motor von Volkswagen, Aufladetechnische Konferenz, Dresden, Germany, 2009.
  5. F. Bäumel, J. Jedro, C. Weber, A. H. Hinkelmann, A. Mayer, and C. Kirschner, The Turbocharger of the Third Generation of the AUDI R4-TFSI Engines Using the Example of the New 1. 8l TFSI, Aufladetechnische Konferenz, Dresden, Germany, 2011.
  6. N. Merdes, C. Enderle, G. Vent, and R. Weller, “Der neue vierzylinder-ottomotor mit turbo-aufladung von Mercedes-Benz,” Motortechnische Zeitschrift 12/2011, 72. Jahrgang, pp. 942-951, 2011.
  7. N. Watson and M. S. Janota, Turbocharging the Internal Combustion Engine, The MacMillan Press, 1982.
  8. J. Walkingshaw, S. Spence, J. Ehrhard, and D. Thornhill, “An investigation into improving off-design performance in a turbocharger turbine utilizing non-radial blading,” in Proceedings of the ASME Turbo Expo Conference, 2011.
  9. N. C. Baines, “Fundamentals of turbocharging,” Concepts NREC, Edward Brother Incorporated, 2005.
  10. K. Zinner, Aufladung von Verbrennungsmotoren, Springer, Auflage, Germany, 1985.
  11. M. Abidat, H. Chen, N. C. Baines, and M. R. Firth, “Design of a highly loaded mixed flow turbine,” Proceedings of the Institution of Mechanical Engineers Part A, vol. 206, no. 2, pp. 95–107, 1992. View at Google Scholar · View at Scopus
  12. H. Chen and N. C. Baines, “The aerodynamic loading of radial and mixed-flow turbines,” International Journal of Mechanical Sciences, vol. 36, no. 1, pp. 63–79, 1994. View at Google Scholar · View at Scopus
  13. S. Rajoo and R. Martinez-Botas, “Mixed flow turbine research: a review,” Journal of Turbomachinery, vol. 130, no. 4, Article ID 044001, 12 pages, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Filsinger, G. Fitzky, and B. Phillipsen, “Flexible turbocharger turbine test rig MONA VI,” in Proceedings of the 8th International Conference on Turbochargers and Turbocharging (IMechE '06), pp. 207–222, May 2006. View at Scopus
  15. B. Lüddecke, D. Filsinger, and M. Bargende, “On wide mapping of a mixed flow turbine with regard to compressor heat flows during turbocharger testing,” in Proceedings of the 10th International Conference on Turbochargers and Turbocharging (IMechE '11), pp. 185–202, 2011.
  16. M. V. Casey and T. M. Fesich, “On the efficiency of compressors with diabatic flows,” in Proceedings of the ASME Turbo Expo Conference, pp. 785–797, Orlando, Fla, USA, June 2009. View at Scopus
  17. Kistler Instrumente AG Winterthur, CH-8408 Winterthur, Switzerland, Pressure Sensors Type 4045 and 4075, http://www.kistler.com/mediaaccess/4045A10__000-064m-10.92.pdf.
  18. V. Smiljanovski, J. Scharf, N. Schorn, S. Pischinger, and B. Funken, Messung des Turbinen-Wirkungsgrads bei Niedrigen Drehzahlen, Aufladetechnische Konferenz, Dresden, Germany, 2008.
  19. S. Scharf, Extended turbocharger mapping and engine simulation [Dissertation], RWTH, Aachen, Germany, 2010.
  20. A. Pesiridis, W. S. I. W. Salim, and R. F. Martinez-Botas, “Turbocharger matching methodology for improved exhaust gas energy recovery,” in Proceedings of the 10th International Conference on Turbochargers and Turbocharging (IMechE '12), pp. 203–218, 2012.
  21. N. Baines and C. Fredriksson, “The simulation of turbocharger performance for engine matching,” Motorprozesssimulation und Aufladung, 2, pp. 101-111, 2007.
  22. N. Ikeya, H. Yamaguchi, K. Mitsubori, and N. Kondoh, “Development of advanced model of turbocharger for automotive engines,” SAE Paper 920047, 1992. View at Google Scholar
  23. P. Scheller, C. Schnückel, C. Jördens, D. Hagelstein, and J. Theobald, Evaluation Study of Different Turbine Wheel Geometries for Turbocharged Gasoline Engines, Aufladetechnische Konferenz, Dresden, Germany, 2011.