Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2013, Article ID 293486, 12 pages
http://dx.doi.org/10.1155/2013/293486
Research Article

Design and Performance Evaluation of a Very Low Flow Coefficient Centrifugal Compressor

1Key Laboratory of Advanced Energy and Power Chinese Academy of Sciences, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China
2Graduate University of Chinese Academy of Sciences, Beijing 100190, China
3Department of Mechanical Engineering, Michigan State University, East Lansing, MA 48823, USA

Received 1 August 2013; Accepted 16 September 2013

Academic Editor: Masaru Ishizuka

Copyright © 2013 Yongsheng Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Sato, J. M. Oh, and A. Engeda, “Experimental and numerical investigation of the flow in a vaneless diffuser of a centrifugal compressor stage. Part 1: experimental investigation,” Proceedings of the Institution of Mechanical Engineers C, vol. 219, no. 10, pp. 1053–1059, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. R. H. Aungier, Centrifugal Compressor: A Strategy for Aerodynamic Design and Analysis, ASME Press, New York, NY, USA, 2000.
  3. V. Rusak, “Development and performance of the wedge-type low specific speed compressor wheel,” Tech. Rep. 82-GT-214, ASME, 2009. View at Google Scholar
  4. M. V. Casey, P. Dalbert, and E. Schurter, “Radial compressor stages for low flow coefficients,” in Proceedings of the IMechE International Conference on Machinery for the Oil and Gas Industries, 1990.
  5. T. Koizumi, “Experimental studies on performance of centrifugal compressors with very small flow coefficient,” Mitsui Zosen Technical Review, vol. 117, pp. 28–39, 1983. View at Google Scholar
  6. J. Paroubek, J. Kyncl, and V. Cyrus, “Experimental investigation and performance analysis of six low flow coefficient centrifugal compressor stages,” Transactions of the ASME: Journal of Turbomachinery, vol. 117, no. 4, pp. 585–592, 1995. View at Google Scholar · View at Scopus
  7. J.-L. Di Liberti, Design and development of low-flow coefficient centrifugal compressors for industrial application [Ph.D. thesis], Michigan State University, 1998.
  8. Y. I. Biba, D. A. Nye, and L. I. U. Zheji, “Performance evaluation and fluid flow analysis in low flow stages of industrial centrifugal compressor,” International Journal of Rotating Machinery, vol. 8, no. 5, pp. 309–317, 2002. View at Google Scholar · View at Scopus
  9. M. R. Galvas, “Fortran program for predicting off-design performance of centrifugal com-pressors,” Tech. Rep. TN D-7487, NASA, 1973. View at Google Scholar
  10. K. H. Lüdtke, Process Centrifugal Compressors: Basic, Function, Operation, Design, Application, Springer, Berlin, Germany, 2010.
  11. F. J. Wiesner, “A review of slip factors for centrifugal compressors,” Journal of Engineering for Power Transactions of the ASME, vol. 89, pp. 558–572, 1967. View at Google Scholar
  12. R. H. Aungier, “Mean streamline aerodynamic performance analysis of centrifugal compressors,” Transactions of the ASME: Journal of Turbomachinery, vol. 117, no. 3, pp. 360–366, 1995. View at Google Scholar · View at Scopus
  13. S. L. Dixon, Fluid Mechanics and Thermodnamics of Turbomachinery, Butterworth-Heinemann, 4th edition, 1998.
  14. Y. Senoo and Y. Kinoshita, “Limits of rotating stall and stall in vaneless diffusers of centrifugal compressors,” Tech. Rep. 78-GT-19, ASME, 1978. View at Google Scholar
  15. S. Lieblein, “Loss and stall analysis of compressor cascades,” ASME Transactions, Journal of Basic Engineering, vol. 81, pp. 387–400, 1959. View at Google Scholar
  16. H. Krain and B. Hoffmann, “Flow physics in high pressure ratio centrifugal compressors,” in Proceedings of the ASME Fluids Engineering Division Summer Meeting, June 1998. View at Scopus
  17. G. Eisenlohr and H. Krain, “Investigation of the flow through a high pressure ratio centrifugal impeller,” in Proceedings of the ASME Conference Proceedings, 2003. View at Scopus