Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2014, Article ID 275916, 18 pages
http://dx.doi.org/10.1155/2014/275916
Research Article

Influence of Spatially Varying Flow on the Dynamic Response of a Waterjet inside an SES

1Department of Civil and Environmental Engineering, University of Washington, Seattle, WA 98195, USA
2Maritime Research Associates, LLC, Ann Arbor, MI 48104, USA
3Department of Naval Architecture and Marine Engineering, University of Michigan, Ann Arbor, MI 48109, USA

Received 30 April 2014; Accepted 13 October 2014; Published 3 December 2014

Academic Editor: Farid Bakir

Copyright © 2014 Michael R. Motley et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. W. Lindau, C. Pena, W. J. Baker et al., “Modeling of cavitating flow through waterjet propulsors,” International Journal of Rotating Machinery, vol. 2012, Article ID 716392, 13 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. P. A. Brandner and G. J. Walker, “An experimental investigation into the performance of a flush water-jet inlet,” Journal of Ship Research, vol. 51, no. 1, pp. 1–21, 2007. View at Google Scholar · View at Scopus
  3. J. L. Allison, “Marine waterjet propulsion,” Transactions of the Society of Naval Architects and Marine Engineers, vol. 101, pp. 273–335, 1993. View at Google Scholar
  4. J. L. Allison and C. B. Liang, “Modern tools for water jet pump design and recent advances in the field,” in Proceedings of the International Conference on Waterjet Propulsion: Latest Developments, Amsterdam, The Netherlands, 1998.
  5. T. E. Taylor, J. E. Kerwin, and J. O. Scherer, “Waterjet pump design and analysis using a coupled lifting surface and RANS procedure,” in Proceedings of the International Conference on Waterjet Propulsion II, RINA, Amsterdam, Netherlands, 1998.
  6. T. E. Taylor and R. W. Kimball, “Experimental validation of a coupled lifting-surface/rans procedure for waterjet pump design and analysis,” in Proceedings of the 5th International Conference on Fast Sea Transportation (FAST '99), pp. 893–900, Seattle, Wash, USA, 1999.
  7. R. W. Kimball, J. O. Scherer, and T. E. Taylor, “Enhancements to the design and analysis of waterjet propulsors using a coupled lifting-surface/RANS technique and comparisons with experiment,” in Proceedings of the International Conference on Waterjet Propulsion III, Paper no. 9, RINA, Gothenborg, Sweden, 2001.
  8. H. Sun and S. A. Kinnas, “Performance prediction of cavitating water-jet propulsors,” in Proceedings of the SNAME Maritime Technology Conference & Expo and Ship Production Symposium, Houston, Tex, USA, 2008.
  9. S.-E. Kim, S. Schroeder, and H. Jasak, “A multi-phase CFD framework for predicting performance of marine propulsors,” in Proceedings of the 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-13 '10), pp. 7–15, Honolulu, Hawaii, USA, April 2010. View at Scopus
  10. C. J. Chesnakas, M. J. Donnelly, D. W. Pfitsch, A. J. Becnel, and S. D. Schroeder, “Performance Evaluation of the ONR Axial Waterjet 2 (AxWJ-2),” NSWCCD-50-TR-2009/089, Naval Surface Warfare Center Carderock Division, 2009. View at Google Scholar
  11. C. J. Chesnakas, M. J. Donnelly, D. W. Pfitsch, A. J. Becnel, and S. D. Schroeder, “Pump loop testing of an axial flow waterjet,” in Proceedings of the 28th Symposium on Naval Hydrodynamics, Pasadena, Calif, USA, 2010.
  12. R. Verbeek and N. W. H. Bulten, “Recent development in waterjet design,” in Proceedings of the International Conference on Waterjet Propulsion II, RINA, Amsterdam, Netherlands, 1998.
  13. N. W. H. Bulten and B. P. M. van Esch, “Fully transient CFD analyses of waterjet pumps,” Marine Technology, vol. 44, no. 3, pp. 185–193, 2007. View at Google Scholar · View at Scopus
  14. B. P. M. Van Esch, “Performance and radial loading of a mixed-flow pump under non-uniform suction flow,” Journal of Fluids Engineering, Transactions of the ASME, vol. 131, no. 5, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. H. Gao, W. Lin, and Z. Du, “Numerical flow and performance analysis of a water-jet axial flow pump,” Ocean Engineering, vol. 35, no. 16, pp. 1604–1614, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. ITTC, “The specialist committee on validation of waterjet test procedures: final report and recommendations to the 23rd ITTC,” in Proceedings of the 23rd International Towing Tank Conference, 2002.
  17. ITTC, “Testing and extrapolation methods: high speed marine vehicles, waterjets, waterjet system performance, recommended procedures and guidelines,” in Proceedings of the 24th International Towing Tank Conference, Edinburgh, UK, 2005.
  18. S. Jessup, M. Donnelly, D. Fry, D. Cusanelli, and M. Wilson, “Performance analysis of a four waterjet propulsion system for a large sealift ship,” in Proceedings of the 27th Symposium on Naval Hydrodynamics, Seoul, Korea, 2008.
  19. S. Guo and Y. Chen, “Non-uniform distribution of water-jet inlet flow field,” in Proceedings of the IEEE International Conference on Information and Automation (ICIA '10), pp. 1452–1456, Harbin, China, June 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Hino and K. Ohashi, “Numerical simulation of flow around a waterjet propelled ship,” in Proceedings of the 1st International Symposium on Marine Propulsors (SMP '09), Trondheim, Norway, 2009.
  21. F. Stern, P. Carrica, M. Kandasamy et al., “Computational hydrodynamic tools for high-speed sealift,” Transactions of The Society of Naval Architects and Marine Engineers, vol. 114, pp. 55–81, 2007. View at Google Scholar
  22. M. Kandasamy, T. Takai, and F. Stern, “Validation of detailed waterjet simulation using urans for large high-speed sea-lifts,” in Proceedings of the 10th International Conference on Fast Sea Transportation, Athens, Greece, 2009.
  23. M. Kandasamy, S. K. Ooi, P. Carrica, and F. Stern, “Integral force/moment waterjet model for CFD simulations,” Journal of Fluids Engineering, Transactions of the ASME, vol. 132, no. 10, Article ID 101103, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Steen, “Experiences with seakeeping capabilities of SES ship,” in Proceedings of the RTO AVT Symposium on Habitability of Combat and Transport Vehicles: Noise, Vibration, and Motion, Prague, Czech Republic, 2004.
  25. N. Ohba, T. Matsumura, and A. Imakita, “Motion control in waves of a 140M SES,” in Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama, Japan, 2008.
  26. D. Wilcox, Turbulence Modeling for CFD, DCW Industries, La Canada, Calif, USA, 2nd edition, 1996.
  27. J. Sauer, Instationaer kavitierende Stroemungen-ein neues Modell, basierend auf Fron Capturing VOF und Blasendynamik [Dissertation, thesis], Universitaet Karlsruhe, Karlsruhe, Germany, 2000.
  28. Y. Young, B. Savander, and M. Kramer, “Numerical investigation of the impact of SES-waterjet interactions and flow non-uniformity on pump performance,” in Proceedings of the 11th International Conference on Fast Sea Transportation (FAST '11), Honolulu, Hawaii, USA, 2011.
  29. T. Michael, S. Schroeder, and A. Becnel, “Design of the ONR AxWJ-2 axial flow water jet pump,” Tech. Rep. NSWCCD-50-TR-2008/066, Naval Surface Warfare Center Carderock Division, 2008. View at Google Scholar
  30. L. Andersson, “ONR AxWJ-2, pump loop test,” Tech. Rep. PR-1223, Rolls-Royce Hydrodynamic Research Center, Kristinehamm, Sweden, 2010. View at Google Scholar