Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2014, Article ID 704315, 11 pages
http://dx.doi.org/10.1155/2014/704315
Research Article

Effect of Chamfer Angle on the Calibration Curves of Five Hole Probes

Thermal Turbomachines Laboratory, Department of Mechanical Engineering, IIT Madras, Chennai 600 036, India

Received 30 May 2014; Accepted 28 August 2014; Published 15 September 2014

Academic Editor: Takayuki Matsunuma

Copyright © 2014 Nekkanti Sitaram and Kancherla Srikanth. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Nekkanti Sitaram and Kancherla Srikanth, “Effect of Chamfer Angle on the Calibration Curves of Five Hole Probes,” International Journal of Rotating Machinery, vol. 2014, Article ID 704315, 11 pages, 2014. https://doi.org/10.1155/2014/704315.