Table of Contents Author Guidelines Submit a Manuscript
International Journal of Rotating Machinery
Volume 2015 (2015), Article ID 761918, 13 pages
http://dx.doi.org/10.1155/2015/761918
Research Article

Effect of Partial Span Aspiration on the Performance of a Transonic Axial Compressor Rotor: A Numerical Study

1GE Energy, Bangalore 560066, India
2Department of Automotive and Aeronautical Engineering, Faculty of Engineering and Technology, M.S. Ramaiah University of Applied Sciences, Bangalore 560058, India
3SoftInWay Turbomachinery Solutions Pvt. Ltd., Bangalore 560052, India

Received 30 June 2015; Revised 14 September 2015; Accepted 15 September 2015

Academic Editor: Ryoichi Samuel Amano

Copyright © 2015 Vijaykumar Jain et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. I. A. Johnson and R. O. Bullock, “Aerodynamic design of axial flow compressors,” NASA SP-36, 1965. View at Google Scholar
  2. B. J. Schuler, J. L. Kerrebrock, and A. Merchant, “Experimental investigation of a transonic aspirated compressor,” Journal of Turbomachinery, vol. 127, no. 2, pp. 340–348, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Merchant and J. L. Kerrebrock, “Experimental investigation of a high pressure ratio aspirated fan stage,” Paper ASME GT2004-53679 [NASA TM-2004-213080], 2004. View at Google Scholar
  4. J. Kerrebrock, “Research and development on aspirated compressors,” AFOSR/NA Technical Report AFRL-SR-AR-TR-04-0285, 2003. View at Google Scholar
  5. G. A. C. Falla, Numerical investigation of the flow in tandem compressor cascades [Research thesis], Vienna University of Technology, Institute of Thermal Power Plants, Vienna, Austria, 2004.
  6. A. Merchant, “Aerodynamic design and performance of aspirated airfoils,” Journal of Turbomachinery, vol. 125, no. 1, pp. 141–148, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. J. H. Freedman, “Design of a multi-spool, high-speed, counter-rotating, aspirated compressor,” AFIT/CIA 20001120094, 2000. View at Google Scholar
  8. T. Q. Dang, M. V. Rooij, and L. M. Larosiliere, “Design of aspirated compressor blades using three-dimensional inverse method,” NASA Technical Memorandum TM-2003-212212; ARL-TR-2957; GT-2003-38492, 2003. View at Google Scholar
  9. J. L. Kerrebrock, Control of flow in compressors by suction/mechanical design of an experimental aspirated compressor [Research Thesis], Vienna University of Technology, Institute of Thermal Power Plants, Vienna, Austria, 1997.
  10. S. Guo, H. W. Lu, J. Liu, and C. J. Wu, “The effects of cavity geometry on an aspirated compressor cascade,” Journal of Theoretical and Applied Mechanics, vol. 52, no. 1, pp. 117–128, 2014. View at Google Scholar
  11. Y. Liu, J. Sun, and L. Lu, “Corner separation control by boundary layer suction applied to a highly loaded axial compressor cascade,” Energies, vol. 7, no. 12, pp. 7994–8007, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. L. Reid and R. D. Moore, “Design and overall performance of four highly loaded, high speed inlet stages for an advanced high pressure ratio core compressor,” NASA Technical Paper TP-1337, NASA, 1978. View at Google Scholar
  13. V. K. Jain, Numerical investigations on aspirated transonic axial compressor rotor [M.S. thesis], Ramaiah School of Advanced Studies, Bangalore, India, 2008.
  14. J. D. Denton, “Lessons from rotor 37,” Journal of Thermal Science, vol. 6, no. 1, pp. 1–13, 1997. View at Publisher · View at Google Scholar · View at Scopus
  15. K. L. Suder, Blockage Development in a Transonic, Axial Compressor Rotor, ASME Turbo Expo, Orlando, Fla, USA, 1997.