Research on Meshing Stiffness and Vibration Response of Pitting Fault Gears with Different Degrees

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr class="thead"><td class="align_left">Degree</td><td class="align_center">Double tooth</td><td class="align_center">Single tooth</td></tr><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr><td class="align_left">1</td><td class="align_center">11.53%</td><td class="align_center">11.92%</td></tr><tr><td class="align_left">2</td><td class="align_center">17.55%</td><td class="align_center">25.25%</td></tr><tr><td class="align_left">3</td><td class="align_center">22.15%</td><td class="align_center">37.13%</td></tr><tr class="table-tr"><td colspan="3"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Mesh stiffness drop percentage.</div>

International Journal of Rotating Machinery

tab2

Table 2

Table 2: Research on Meshing Stiffness and Vibration Response of Pitting Fault Gears with Different Degrees 