Table of Contents
International Journal of Vehicular Technology
Volume 2014 (2014), Article ID 972049, 19 pages
http://dx.doi.org/10.1155/2014/972049
Research Article

Dynamic Analysis and Design Optimization of Series Hydraulic Hybrid System through Power Bond Graph Approach

Precision Engineering and Instrumentation Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai-600036, India

Received 30 September 2013; Revised 25 December 2013; Accepted 26 December 2013; Published 1 April 2014

Academic Editor: Tang-Hsien Chang

Copyright © 2014 R. Ramakrishnan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. E. Fuhs, Hybrid Vehicles and the Future of Personal Transportation, CRC Press, 2009.
  2. E. Karden, S. Ploumen, B. Fricke, T. Miller, and K. Snyder, “Energy storage devices for future hybrid electric vehicles,” Journal of Power Sources, vol. 168, no. 1, pp. 2–11, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Liu and H. Peng, “A systematic design approach for two planetary gear split hybrid vehicles,” Vehicle System Dynamics, vol. 48, no. 11, pp. 1395–1412, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. P. Shakouri, A. Ordys, P. Darnell, and P. Kavanagh, “Fuel efficiency by coasting in the vehicle,” International Journal of Vehicular Technology, vol. 2013, Article ID 391650, 14 pages, 2013. View at Publisher · View at Google Scholar
  5. C. Shen, P. Shan, and T. Gao, “A comprehensive overview of hybrid electric vehicles,” International Journal of Vehicular Technology, vol. 2011, Article ID 571683, 7 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. K. E. Rydberg, “Energy efficient hydraulic hybrid drives,” in Proceedings of the 11th Scandinavian International Conference on Fluid Power (SICFP ’09), pp. 1–14, Linkoping, June 2009.
  7. E. Dinçmen and B. A. Güvenç, “A control strategy for parallel hybrid electric vehicles based on extremum seeking,” Vehicle System Dynamics, vol. 50, no. 2, pp. 199–227, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Ji, Y. Zhu, C. Liang, and X. Liu, “Simulation study on the operating characteristics of a hybrid hydraulic passenger car with a power split transmission,” International Journal of Vehicle System Dynamics, vol. 51, no. 10, pp. 1518–1532, 2013. View at Google Scholar
  9. J. D. Van de Ven, M. W. Olson, and P. Y. Li, “Development of hydro-mechanical hydraulic hybrid drive with independent wheel torque control for an urban passenger vehicle,” in Proceedings of the International Fluid Power Exposition, pp. 11–15, Las Vegas, Nev, USA, March 2008.
  10. Y. J. Kim and Z. Filipi, “Series hydraulic hybrid propulsion for a light truck- optimizing the thermostatic power management,” SAE Transactions, Journal of Engines, vol. 116, Article ID 2007-24-0080, pp. 1597–1609, 2007. View at Google Scholar
  11. B. Wu, C.-C. Lin, Z. Filipi, H. Peng, and D. Assanis, “Optimal power management for a hydraulic hybrid delivery truck,” Vehicle System Dynamics, vol. 42, no. 1-2, pp. 23–40, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. J. Kim and Z. Filipi, “Simulation study of a series hydraulic hybrid propulsion system for a light truck,” Society of Automobile Engineers Paper 2007-01-4151, University of Michigan, 2007. View at Google Scholar
  13. R. Ramakrishnan, S. S. Hiremath, and M. Singaperumal, “Power bond graph modeling of series hydraulic hybrid system,” in Proceedings of the International Conference on Fluid Mechanics and Fluid Power, paper 608, pp. 1–8, IIT Madras, 2010.
  14. F. T. Elder and D. R. Otis, “Simulation of a hydraulic hybrid powertrain,” American Society of Mechanical Engineers, Article ID 73-ICT-50, pp. 1–6, 1973. View at Google Scholar
  15. Z. Filipi and Y. J. Kim, “Hydraulic hybrid propulsion for heavy vehicles: combining the simulation and engine-in-the-loop techniques to maximize the fuel economy and emission benefits,” Oil and Gas Science and Technology, vol. 65, no. 1, pp. 155–178, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Ramakrishnan, S. S. Hiremath, and M. Singaperumal, “Theoretical investigations on the effect of system parameters in series hydraulic hybrid system with hydrostatic regenerative braking,” The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp. 1321–1331, 2012. View at Google Scholar
  17. P. Wu, N. Luo, F. J. Fronczak, and N. H. Beachley, “Fuel economy and operating characteristics of hydro-pneumatic energy storage automobile,” Tech. Rep. 851678, Society of Automobile Engineers, 1985. View at Google Scholar
  18. D. Sinoquet, G. Rousseau, and Y. Milhau, “Design optimization and optimal control for hybrid vehicles,” Optimization and Engineering, vol. 12, no. 1-2, pp. 199–213, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. S. S. Hiremath, R. Ramakrishnan, and M. Singaperumal, “Optimization of process parameters in series hydraulic hybrid system,” in Proceedings of 13th Scandinavian Conference on Fluid Power, pp. 199–205, Linkoping University, 2013.
  20. R. E. Kruse and T. A. Huls, “Development of the federal urban driving schedule,” SAE Paper 730553, Society of Automobile Engineers, 1973. View at Google Scholar
  21. M. Singaperumal and S. S. Hiremath, “Investigations on actuator dynamics through theoretical and finite element approach,” Mathematical Problems in Engineering, vol. 2010, Article ID 191898, 22 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Pease and J. M. Henderson, “Simulation of a hydraulic hybrid vehicle using bond graphs,” Journal of Mechanisms, Transmissions, and Automation in Design, vol. 110, no. 3, pp. 365–369, 1988. View at Google Scholar · View at Scopus
  23. W. Borutzky, “Bond graph modelling and simulation of multidisciplinary systems—an introduction,” Simulation Modelling Practice and Theory, vol. 17, no. 1, pp. 3–21, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. B. W. Barnard and P. Dransfield, “Predicting response of a proposed hydraulic control system using bond graphs,” Transactions of the ASME Journal of Dynamic Systems, Measurement and Control, vol. 99, no. 1, pp. 1–8, 1977. View at Google Scholar · View at Scopus
  25. D. Hrovat and W. E. Tobler, “Bond graph modeling of automotive power trains,” Journal of the Franklin Institute, vol. 328, no. 5-6, pp. 623–662, 1991. View at Google Scholar · View at Scopus
  26. P. Dransfield, “Using bond graph in simulating an Electro-Hydraulic System,” Journal of the Franklin Institute, vol. 308, no. 3, pp. 173–184, 1979. View at Google Scholar
  27. M. Filippa, C. Mi, J. Shen, and R. C. Stevenson, “Modeling of a hybrid electric vehicle powertrain test cell using bond graphs,” IEEE Transactions on Vehicular Technology, vol. 54, no. 3, pp. 837–845, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. Q. Zhao and F. Gao, “Bond graph modeling of hydraulic six-degree-of-freedom motion simulator,” Proceedings of the Institution of Mechanical Engineers C, vol. 226, no. 12, pp. 2887–2901, 2012. View at Google Scholar
  29. W. Borutzky, B. Barnard, and J. U. Thoma, “Describing bond graph models of hydraulic components in Modelica,” Mathematics and Computers in Simulation, vol. 53, no. 4–6, pp. 381–387, 2000. View at Google Scholar · View at Scopus
  30. S.-J. Lee and P.-H. Chang, “Modeling of a hydraulic excavator based on bond graph method and its parameter estimation,” Journal of Mechanical Science and Technology, vol. 26, no. 1, pp. 195–204, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. C. Kleijn, “Getting Started with 20-sim 4. 1. 20-Sim corporation Pvt,” 2009, http://www.20sim.com/downloads/files/20sim41GettingStartedManual.pdf.
  32. K. Dasgupta, “Analysis of a hydrostatic transmission system using low speed high torque motor,” Mechanism and Machine Theory, vol. 35, no. 10, pp. 1481–1499, 2000. View at Publisher · View at Google Scholar · View at Scopus
  33. J. D. Head and M. C. Zerner, “A Broyden-Fletcher-Goldfarb-Shanno optimization procedure for molecular geometries,” International Journal of Chemical Physics Letters, vol. 122, no. 3, pp. 264–270, 1985. View at Google Scholar