Table of Contents Author Guidelines Submit a Manuscript
Journal of Applied Mathematics
Volume 2014, Article ID 179085, 19 pages
Research Article

Multiobjective Fuzzy Mixed Assembly Line Sequencing Optimization Model

1Department of Mechanical Engineering, Centre for Product Design and Manufacturing, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
2Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang Darul Makmur, Malaysia

Received 8 November 2013; Revised 20 February 2014; Accepted 11 March 2014; Published 8 May 2014

Academic Editor: Olabisi Falowo

Copyright © 2014 Farzad Tahriri et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Waldemar Grzechca, “Difficulties in estimation the quality of assembly line balancing problem,” 2015 20th International Conference on Methods and Models in Automation and Robotics (MMAR), pp. 1179–1184, . View at Publisher · View at Google Scholar
  • Mudassar Rauf, Mirza Jahanzaib, Shoaib Sarfraz, Essam Shehab, and Saima Javeed, “Multi-objective optimization or models sequencing n mixed-model assembly lines,” Advances in Transdisciplinary Engineering, vol. 6, pp. 96–101, 2017. View at Publisher · View at Google Scholar
  • Mudassar Rauf, Zailin Guan, Shoaib Sarfraz, Jabir Mumtaz, Essam Shehab, Mirza Jahanzaib, and Muhammad Hanif, “A smart algorithm for multi-criteria optimization of model sequencing problem in assembly lines,” Robotics and Computer-Integrated Manufacturing, vol. 61, pp. 101844, 2020. View at Publisher · View at Google Scholar