Table of Contents Author Guidelines Submit a Manuscript
Journal of Applied Mathematics
Volume 2014 (2014), Article ID 596326, 11 pages
http://dx.doi.org/10.1155/2014/596326
Research Article

Real-Time Control Strategy of Elman Neural Network for the Parallel Hybrid Electric Vehicle

School of Transportation and Vehicle Engineering, Shandong University of Technology, No. 12 Zhangzhou Road, Zibo, Shandong 255049, China

Received 15 April 2014; Revised 30 June 2014; Accepted 1 July 2014; Published 26 August 2014

Academic Editor: H. R. Karimi

Copyright © 2014 Ruijun Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. G. Cui, Automotive Technology Of New Energy, Beijing University of Technology press, Beijing, China, 2009.
  2. R. Hodkinson and J. Fentos, Lightweight Electric/Hybrid Vehicle Design, SAE International, Warrendale, Pa, USA, 2001.
  3. J. Wu, Optimization of energy management strategy for parallel hybrid electric vehicle [Ph.D. thesis], Shang Dong University, Ji Nan, China, 2008.
  4. C. Lin, H. Peng, J. W. Grizzle, and J. Kang, “Power management strategy for a parallel hybrid electric truck,” IEEE Transactions on Control Systems Technology, vol. 11, no. 6, pp. 839–849, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Hofman, M. Steinbuch, R. van Druten, and A. Serrarens, “A Rule-based energy management strategies for hybrid vehicles,” Electric and Hybrid Vehicles, vol. 1, no. 1, pp. 71–94, 2007. View at Google Scholar
  6. N. Jalil, N. A. Kheir, and M. Salman, “A rule-based energy management strategy for a series hybrid vehicle,” in Proceedings of the American Control Conference, pp. 689–693, Albuquerque, NM, USA, 1997. View at Publisher · View at Google Scholar
  7. S. Delprat, J. Lauber, T. M. Guerra, and J. Rimaux, “Control of a parallel hybrid powertrain: optimal control,” IEEE Transactions on Vehicular Technology, vol. 53, no. 3, pp. 872–881, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Delprat, T. M. Guerra, and J. Rimaux, “Optimal control of a parallel hybrid powertrain from global optimization to real time control strategy,” in Proceedings of the 18th International Electric Vehicle Symposium, Berlin, Germany, 2001.
  9. M. H. Asemani and V. J. Majd, “Stability of output-feedback DPDC-based fuzzy synchronization of chaotic systems via LMI,” Chaos, Solitons and Fractals, vol. 42, no. 2, pp. 1126–1135, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. G. D. Tian, J. W. Chu, Y. Lu, H. Ke, X. Zha, and G. Xu, “Expected energy analysis for industrial process planning problem with fuzzy time parameters,” Computers & Chemical Engineering, vol. 35, no. 12, pp. 2905–2912, 2011. View at Google Scholar
  11. G. Paganelli and S. Delprat, “Equivalent consumption minimization strategy for parallel hybrid powertrains,” in Proceedings of the IEEE Vehicular Technology Conference, vol. 4, pp. 2076–2081, 2002.
  12. J. Park, Y. Park, and J. H. Park, “Real-time powertrain control strategy for series-parallel hybrid electric vehicles,” SAE Paper 3172, 2007. View at Google Scholar
  13. A. Sciarretta, M. Back, and L. Guzzella, “Optimal control of parallel hybrid electric vehicle,” IEEE, vol. 12, no. 3, pp. 352–363, 2004. View at Publisher · View at Google Scholar
  14. J. Park, Y. Park, and J. H. Park, “Real-time powertrain control strategy for series-parallel hybrid electric vehicles,” SAE Paper, vol. 1, no. 3172, 2007. View at Google Scholar
  15. H. R. Karimi and H. J. Gao, “New delay-dependent exponential H synchronization for uncertain neural networks with mixed time delays,” IEEE Transactions on Systems, Man, and Cybernetics B: Cybernetics, vol. 40, no. 1, pp. 173–185, 2010. View at Publisher · View at Google Scholar
  16. R. Razavian, N. L. Azad, and J. Mcphee, “On real-time optimal control of a series Hybrid Electric Vehicle with an ultra-capacitor,” in Proceedings of the American Control Conference, pp. 547–552, 2012.
  17. D. Sinoquet, G. Rousseau, and Y. Milhau, “Design optimization and optimal control for hybrid vehicles,” Optimization and Engineering, vol. 12, no. 1-2, pp. 199–213, 2011. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  18. G. Paganelli, G. Ercole, A. Brahma, Y. Guezennec, and G. Rizzoni, “General supervisory control policy for the energy optimization of charge-sustaining hybrid electric vehicles,” JSAE Review, vol. 22, no. 4, pp. 511–518, 2001. View at Google Scholar
  19. W. H. Sun, H. J. Gao, and O. Kaynak, “Adaptive backstepping control for active suspension systems with hard constraints,” IEEE/ASME Transactions on Mechatronics, vol. 18, no. 3, pp. 1072–1079, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. W. Sun, Z. Zhao, and H. Gao, “Saturated adaptive robust control for active suspension systems,” IEEE Transactions on Industrial Electronics, vol. 60, no. 9, pp. 3889–3896, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. W. Sun, H. Gao Sr., and O. Kaynak, “Finite frequency H control for vehicle active suspension systems,” IEEE Transactions on Control Systems Technology, vol. 19, no. 2, pp. 416–422, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. W. Sun, Y. Zhao, J. Li, L. Zhang, and H. Gao, “Active suspension control with frequency band constraints and actuator input delay,” IEEE Transactions on Industrial Electronics, vol. 59, no. 1, pp. 530–537, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. F. J. Lin, Y. C. Hung, and S. Y. Chen, “FPGA-based computed force control system using Elman neural network for linear ultrasonic motor,” IEEE Transactions on Industrial Electronics, vol. 56, no. 4, pp. 1238–1253, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. G. Pajares, M. Guijarro, and A. Ribeiro, “A Hopfield Neural Network for combining classifiers applied to textured images,” Neural Networks, vol. 23, no. 1, pp. 144–153, 2010. View at Google Scholar
  25. G. D. Tian, Y. M. Liu, Q. Z. Tian, and J. W. Chu, “Evaluation model and algorithm of product disassembly process with stochastic feature,” Clean Technologies and Environmental Policy, vol. 14, no. 2, pp. 345–356, 2012. View at Google Scholar
  26. G. D. Tian, M. C. Zhou, J. W. Chu, and Y. M. Liu, “Probability evaluation models of product disassembly cost subject to random removal time and different removal labor cost,” IEEE Transactions on Automation Science and Engineering, vol. 9, no. 2, pp. 288–295, 2012. View at Google Scholar
  27. M. Zapateiro, N. Luo, H. R. Karimi, and J. Vehí, “Vibration control of a class of semiactive suspension system using neural network and backstepping techniques,” Mechanical Systems and Signal Processing, vol. 23, no. 6, pp. 1946–1953, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. W. Pawlus, H. R. Karimi, and K. G. Robbersmyr, “Data-based modeling of vehicle collisions by nonlinear autoregressive model and feedforward neural network,” Information Sciences, vol. 235, pp. 65–79, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Guo and W. J. Sun, Neural Network Theory and the Realization of MATLAB7, Publishing House of Electronics Industry, Beijing, China, 2005.
  30. K. L. Zhou and Y. H. Kang, Neural Network Model and MATLAB Simulation Programming, Tsinghua University press, Beijing, China, 2005.
  31. T. Markel, A. Brooker, T. Hendricks et al., “ADVISOR: a systems analysis tool for advanced vehicle modeling,” Journal of Power Sources, vol. 110, no. 2, pp. 255–266, 2002. View at Publisher · View at Google Scholar
  32. X. H. Zeng and Q. N. Wang, “Develop control strategy model of hybrid electric vehicle based on ADVISOR2002,” Automotive Engineering, vol. 26, no. 5, pp. 423–427, 2004. View at Google Scholar