Given that the Crimean and Congo hemorrhagic fever is one of the deadly viral diseases that occur seasonally due to the activity of the carrier “tick,” studying and developing a mathematical model simulating this illness are crucial. Due to the delay in the disease’s incubation time in the sick individual, the paper involved the development of a mathematical model modeling the transmission of the disease from the carrier to humans and its spread among them. The major objective is to comprehend the dynamics of illness transmission so that it may be controlled, as well as how time delay affects this. The discussion of every one of the solution’s qualitative attributes is included. According to the established basic reproduction number, the stability analysis of the endemic equilibrium point and the disease-free equilibrium point is examined for the presence or absence of delay. Hopf bifurcation’s triggering circumstance is identified. Using the center manifold theorem and the normal form, the direction and stability of the bifurcating Hopf bifurcation are explored. The next step is sensitivity analysis, which explains the set of control settings that have an impact on how the system behaves. Finally, to further comprehend the model’s dynamical behavior and validate the discovered analytical conclusions, numerical simulation has been used.

Karrar Qahtan Al-Jubouri

Raid Kamel Naji

Dynamics Analysis of a Delayed Crimean-Congo Hemorrhagic Fever Virus Model in Humans

In this study, we propose a new approach based on fuzzy TODIM (Portuguese acronym for interactive and multicriteria decision-making) for decision-making problems in uncertain environments. Our method incorporates group utility and individual regret, which are often ignored in traditional multicriteria decision-making (MCDM) methods. To enhance the analysis and application of fuzzy sets in decision-making processes, we introduce novel entropy and distance measures for <span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.42943pt" id="M2" height="9.39034pt" version="1.1" viewBox="-0.0498162 -5.96091 6.50656 9.39034" width="6.50656pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><use xlink:href="#g113-114"/></g></svg>-</span>rung picture fuzzy sets. These measures include an entropy measure based on the sine function and a distance measure derived from the Jensen-Shannon divergence. In our methodology, incorporating the sine function into the entropy measure stands out as a distinctive decision, grounded in a profound understanding of the inherent characteristics of fuzzy sets. Utilizing the sine function proves especially advantageous when handling fuzzy sets that exhibit cyclical variations or fluctuations in their membership degrees. We effectively weight the criteria for an improved evaluation by using this new entropy measure. The introduced distance measure finds application in the TODIM approach, allowing the execution of TODIM method steps within a fuzzy environment until the determination of one alternative’s dominance over another—an advancement beyond traditional approaches. We apply our enhanced fuzzy TODIM method to a real-life construction project management problem from the literature and compare the results with those in the literature and obtained from other MCDM methods. Our proposed measures are robust, as demonstrated by the sensitivity analysis that varied the weights of group utility and individual regret, with the results visualized in a 3D sensitivity plot. The findings demonstrate the superiority of our method in providing a more comprehensive evaluation of alternatives, making it a useful tool for decision-makers facing complex and uncertain decision-making problems.

Büşra Aydoğan

Murat Olgun

Florentin Smarandache

Mehmet Ünver

A Decision-Making Approach Incorporating TODIM Method and Sine Entropy in <svg  xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg"   style="vertical-align:-3.42943pt" height="9.39034pt" version="1.1" viewBox="-0.0498162 -5.96091 6.50656 9.39034" width="6.50656pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-114" d="M474 429L457 433C435 440 389 448 367 448C348 448 323 446 309 443C266 434 195 406 148 366C78 307 23 210 23 101C23 35 55 -12 92 -12C118 -12 146 1 196 35C247 70 311 130 346 173H348L281 -148C268 -211 256 -221 208 -229L191 -232L187 -257L433 -245L437 -219L411 -216C357 -210 350 -205 362 -140L427 207C447 315 461 381 474 429ZM387 387C379 337 363 262 355 236C318 180 201 57 142 57C126 57 112 81 112 128C112 205 150 321 220 376C244 395 280 403 312 403C345 403 370 396 387 387Z" /></g></svg>-Rung Picture Fuzzy Set Setting

The streamline upwind Petrov-Galerkin (SUPG) finite element method was used in this study to investigate the thermal and surface roughness effects on an inclined slider bearing with an unsteady fluid film. One-dimensional transverse and longitudinal surface roughness models were considered with the supposition that roughness is stochastic and has a Gaussian random distribution. For simplicity of numerical computation, the irregularity caused by the texture of the surface is transformed into a regular domain. The bearing performance of the combined effect is lower than the thermal and surface roughness effects of the one-dimensional longitudinal surface roughness for all modified Reynolds numbers of nonparallel slider bearings; this means that for nonparallel (<span class="inline_break"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="20.52pt" style="vertical-align:-0.2063904pt" id="M1" height="8.55521pt" version="1.1" viewBox="-0.0498162 -8.34882 20.52 8.55521"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-120" d="M689 332C689 394 670 448 646 448C620 448 597 421 597 396C597 386 600 381 608 372C619 359 620 334 620 315C620 150 538 45 454 45C414 45 386 67 386 122C386 138 388 158 394 180L457 426L452 432L377 416L315 156C302 100 259 45 216 45C176 45 148 67 148 122C148 133 152 158 156 180C162 212 173 259 194 332C201 357 206 384 206 405C206 430 198 448 174 448C125 448 66 406 23 342L43 319C84 368 110 383 121 383C126 383 128 382 128 377C128 370 127 359 122 343C99 268 84 204 77 156C74 137 70 111 70 104C70 25 125 -12 180 -12C228 -12 276 12 319 50C338 8 378 -12 418 -12C549 -12 689 166 689 332Z"/></g><g transform="matrix(.013,0,0,-0.013,12.889,0)"><path id="g117-34" d="M535 323V373H52V323H535ZM535 138V188H52V138H535Z"/></g></svg><span class="irelop"></span><span class="nowrap"><svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" width="15.664pt" style="vertical-align:-0.2063904pt" height="8.55521pt" version="1.1" viewBox="24.102183800000002 -8.34882 15.664 8.55521"><g transform="matrix(.013,0,0,-0.013,24.152,0)"><path id="g113-49" d="M241 635C89 635 35 457 35 312C35 153 89 -12 240 -12C390 -12 443 166 443 312C443 466 390 635 241 635ZM238 602C329 602 354 454 354 312C354 172 330 22 240 22C152 22 124 173 124 313S148 602 238 602Z"/></g><g transform="matrix(.013,0,0,-0.013,30.392,0)"><path id="g113-47" d="M113 -12C146 -12 170 11 170 46C170 78 146 103 114 103S58 78 58 46C58 11 82 -12 113 -12Z"/></g><g transform="matrix(.013,0,0,-0.013,33.356,0)"><path id="g113-53" d="M456 178V225H360V632H320C217 496 115 347 20 206V178H280V106C280 40 276 34 189 27V0H445V27C364 34 360 39 360 106V178H456ZM280 225H82C149 335 214 431 278 520H280V225Z"/></g></svg>)</span></span> between the surface roughness effect and the combined effect condition, there is a decrease of 13% in load-carrying capacity performance and a minimal change in friction force, respectively. However, in the case of nonparallel one-dimensional transverse type slider bearings, the bearing performance of the thermal effect is lower than the combined and surface roughness effects for all modified Reynolds numbers, where between the combined effect and the thermal effect condition, there is a reduction of 19% in load-carrying capacity performance and 2% in friction force practically for all changed Reynolds values, respectively. Furthermore, the combined effects at various temperatures have been investigated. As a result, in both longitudinal and transverse models, in the case of the pad temperature being lower than the slider, the load-carrying capacity performance is higher than in other cases for nonparallel slider bearings, whereas when the slider temperature is lower than the pad temperature, the drag frictional force is the leading one in both models. In general, considering surface texture and inertial effects will increase the performance of a slider. The results obtained are displayed using figures and tables.

Girma Desu Tessema

Getachew Adamu Derese

Awoke Andargie Tiruneh

Performance Analysis of Thermal and Surface Roughness Effect of Slider Bearings with Unsteady Fluid Film Lubricant Using Finite Element Method

This paper uses an augmented Lagrangian method based on an inexact exponential penalty function to solve constrained multiobjective optimization problems. Two algorithms have been proposed in this study. The first algorithm uses a projected gradient, while the second uses the steepest descent method. By these algorithms, we have been able to generate a set of nondominated points that approximate the Pareto optimal solutions of the initial problem. Some proofs of theoretical convergence are also proposed for two different criteria for the set of generated stationary Pareto points. In addition, we compared our method with the NSGA-II and augmented the Lagrangian cone method on some test problems from the literature. A numerical analysis of the obtained solutions indicates that our method is competitive with regard to the test problems used for the comparison.

Appolinaire Tougma

Kounhinir Some

Inexact Exponential Penalty Function with the Augmented Lagrangian for Multiobjective Optimization Algorithms

In recent decades, the study of non-Newtonian fluids has attracted the interest of numerous researchers. Their study is encouraged by the significance of these fluids in fields including industrial implementations. Furthermore, the importance of heat and mass transfer is greatly increased by a variety of scientific and engineering processes, including air conditioning, crop damage, refrigeration, equipment power collectors, and heat exchangers. The key objective of this work is to use the mathematical representation of a chemically reactive Casson-Maxwell fluid over a stretched sheet circumstance. Arrhenius activation energy and aspects of the magnetic field also have a role. In addition, the consequences of both viscous dissipation, Joule heating, and nonlinear thermal radiation are considered. The method transforms partial differential equations originating in fluidic systems into nonlinear differential equation systems with the proper degree of similarity which is subsequently resolved utilizing the Lobatto IIIA technique’s powerful computing capabilities. It is important to recall that the velocity profile drops as the Maxwell fluid parameter increases. Additionally, the increase in the temperature ratio parameter raises both the fluid’s temperature and the corresponding thickness of the boundary layer.

Nesreen Althobaiti

Importance of Activation Energy on Magnetized Dissipative Casson-Maxwell Fluid through Porous Medium Incorporating Chemical Reaction, Joule Heating, and Soret Effects: Numerical Study

The Pareto dominance-based evolutionary algorithms can effectively address multiobjective optimization problems (MOPs). However, when dealing with many-objective optimization problems with more than three objectives (MaOPs), the Pareto dominance relationships cannot effectively distinguish the nondominated solutions in high-dimensional spaces. With the increase of the number of objectives, the proportion of dominance-resistant solutions (DRSs) in the population rapidly increases, which leads to insufficient selection pressure. In this paper, to address the challenges on MaOPs, a knee point-driven many-objective evolutionary algorithm with adaptive switching mechanism (KPEA) is proposed. In KPEA, the knee points determined by an adaptive strategy are introduced for not only mating selection but also environmental selection, which increases the probability of generating excellent offspring. In addition, to remove dominance-resistant solutions (DRSs) in the population, an interquartile range method is adopted, which enhances the selection pressure. Moreover, a novel adaptive switching mechanism between angle-based selection and penalty for selecting solutions is proposed, which is aimed at achieving a balance between convergence and diversity. To validate the performance of KPEA, it is compared with five state-of-the-art many-objective evolutionary algorithms. All algorithms are evaluated on 20 benchmark problems, i.e., WFG1-9, MaF1, and MaF4-13 with 3, 5, 8, and 10 objectives. The experimental results demonstrate that KPEA outperforms the compared algorithms in terms of HV and IGD in most of the test instances.

Maowei He

Xu Wang

Hanning Chen

Xuguang Li

A Knee Point-Driven Many-Objective Evolutionary Algorithm with Adaptive Switching Mechanism

About this journal

<p><em>Journal of Applied Mathematics</em> publishes original research papers and review articles in all areas of applied, computational, and industrial mathematics.</p>


Journal profile

Meet the editorial board

<p>Chief Editor, Professor Theodore E. Simos, is based at Ulyanovsk State Technical University, Russia. His main research interest is the numerical analysis of differential equations.</p>


Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

Journal of Applied Mathematics - Table of contents 2024

title

Journal of Applied Mathematics publishes original research papers and review articles in all areas of applied, computational, and industrial mathematics.

Journal of Applied Mathematics