Abstract
The Environmental Protection Act has created a growing need for the measurement and assessment of trace emissions to the environment. This encompasses three main areas of ground, water and the atmosphere. The need to achieve lower emissions has placed a large burden on analytical techniques, particularly in the areas of trace analysis to ppb and ppt levels. Chromatographic techniques are widely used for assessment and measurement of emissions in all three areas. Enhanced detectors using mass spectrometry principles are available to lower detection limits, but these are expensive. Standard chromatography detectors can be used for trace analysis, but this often leads to extensive sample preparation stages to achieve low detection limits. This paper describes the techniques developed by Thomas Swan & Company to introduce a cost effective way of lowering detection limits. The approach taken meets both BATNEEC and BPEO constraints.