Abstract

Experimental design optimization approach was utilized to develop a sequential injection analysis (SIA) method for promazine assay in bulk and pharmaceutical formulations. The method was based on the oxidation of promazine by Ce(IV) in sulfuric acidic media resulting in a spectrophotometrically detectable species at 512 nm. A 33 full factorial design and response surface methods were applied to optimize experimental conditions potentially controlling the analysis. The optimum conditions obtained were 1.0×10−4 M sulphuric acid, 0.01 M Ce(IV), and 10 μL/s flow rate. Good analytical parameters were obtained including range of linearity 1–150 μg/mL, linearity with correlation coefficient 0.9997, accuracy with mean recovery 98.2%, repeatability with RSD 1.4% (n=7 consequent injections), intermediate precision with RSD 2.1% (n=5 runs over a week), limits of detection 0.34 μg/mL, limits of quantification 0.93 μg/mL, and sampling frequency 23 samples/h. The obtained results were realized by the British Pharmacopoeia method and comparable results were obtained. The provided SIA method enjoys the advantages of the technique with respect to rapidity, reagent/sample saving, and safety in solution handling and to the environment.